Pr. Alexandre Dolgui

Distinguished Professor and Head
 
Automation, Production and Computer Sciences Dept.
IMT Atlantique (former Ecole des Mines de Nantes)
LS2N - CNRS UMR 6004
La Chantrerie
4, rue Alfred Kastler - B.P. 20722
F-44307 NANTES Cedex 3, France
Ph: +33 (0)2 51 85 82 18
Fax: +33 (0)2 51 35 82 49
E-mails: alexandre.dolgui@imt-atlantique.fr

Editor in Chief of the International Journal of Production Research (Taylor & Francis)
 

PUBLICATIONS
(1982 - 2016)

Dr. Alexandre Dolgui is a Distinguished Professor (Full Professor of Exceptional Class in France) and the Head of Automation, Production and Computer Sciences Department at the Ecole des Mines de Nantes, France. His research focuses on manufacturing line design, production planning and supply chain optimization. His main results are based on the exact mathematical programming methods and their intelligent coupling with heuristics and metaheuristics algorithms. He is the co-author of 5 books, the co-editor of 15 books or conference proceedings, the author of 170 refereed journal papers, 21 editorials and 28 book chapters as well as over 370 papers in conference proceedings. He is the Editor-in-Chief of the International Journal of Production Research, an Area Editor of Computers & Industrial Engineering, and an Associate Editor of Journal Européen des Systèmes Automatisés, past Associate Editor of International Journal of Systems Science (2005-2008), IEEE Transactions on Industrial Informatics (2006-2009) and Omega-the International Journal of Management Science (2009-2012), consulting Editor of the International Journal of Systems Science (2009- ). He is Member of the Editorial Boards for 21 other journals, including the International Journal of Production Economics, International Journal of Manufacturing Technology & Management, International Journal of Simulation & Process Modelling, International Journal of Engineering Management & Economics, Journal of Decision Systems, Journal of Mathematical Modelling & Algorithms, Journal of Operations and Logistics, Journal of Industrial Engineering and Management & Production Engineering Review, Decision Making in Manufacturing and Service, Risk and Decision Analysis, etc. Fellow of the European Academy for Industrial Management, Member of the Board of the International Foundation for Production Research, Chair of IFAC TC 5.2 Manufacturing Modelling for Management and Control, Member of IFIP WG 5.7 Advances in Production Management Systems, IEEE System Council Analytics and Risk Technical Committee, Guest editor of special issues of European Journal of Operational Research, International Journal of Production Research, International Journal of Production Economics, Omega – The International Journal of Management Science, Journal of Intelligent Manufacturing, Journal of Mathematical Modeling and Algorithms, and Annual Reviews in Control; he was General Scientific Chair of the 12th IFAC symposium INCOM'06, Chairman of International Program Committee of SCM’02, MOSIM’04, INCOM'09, INCOM'12, IESM'13, MIM'13, and INCOM'15, Chairman of Organizing Committee of the International Conference MOSIM’01 and ROADEF'2011; last ten years, he was Member of Program Committees of over 170 International Conferences, etc. He has been responsible of the French national CNRS working group on Design of Production Systems (with about 336 individual members) and the regional project on Design and Management of Reconfigurable Manufacturing Systems.

Download the complete list of publications: 1982-2016: Publis_Dolgui_1982_2016.pdf
Download the Curriculum Vitae (resume): CV_English_Alexandre_Dolgui.pdf / CV_French_Alexandre_Dolgui.pdf


 


IIE Transactions on Design and Manufacturing Best Paper Award 2008:
MIP Approach to Balancing Transfer Lines with Blocks of Parallel Operations,
IIE Transactions, 2006, vol. 38, n°10, p. 869-882.
Institute of Industrial Engineers, United States, www.iienet.org


BOOKS (AUTHOR)

  • A. Dolgui, J.M. Proth. Supply Chain Engineering: Useful Methods and Techniques. Springer, 2010, (ISBN: 978-1-84996-016-8), 539 pages.
     
  • A. Dolgui, J.M. Proth. Les systèmes de production modernes. Tome 1 : Conception, gestion et optimisation. Hermès Science, London, 2006, (ISBN: 2-7462-1249-8), 415 pages. (in French).
     
  • A. Dolgui, J.M. Proth. Les systèmes de production modernes. Tome 2 : Outils et corrigés des exercices. Hermès Science, London, 2006, (ISBN: 2-7462-1250-1), 385 pages. (in French).
     
  • N. Guschinsky, G. Levin, A. Dolgui. Decision-making support in transmission system design, Publishing House "Belarusian Science", Minsk, 2006, (ISBN: 985-08-0755-5), 262 pages. (in Russian).
     
  • D. Ofitserov, A. Dolgui and V. Starych. Programming on Personal Computer: Tutorials, Publishing House "Vyscheichaïa chkola", Minsk, 1993, (ISBN: 5-339-00809-6), 262 pages. (in Russian).
Top

BOOKS (EDITOR)

  • 15th IFAC Symposium on Information Control Problems in Manufacturing INCOM 2015, Canada, Ottawa, 11 – 13 Mai 2015, Elsevier, IFAC-PapersOnLine, vol. 48, n° 3, pp. 1-2444, 2015, Edited by A. Dolgui, J. Sasiadek and M. Zaremba (ISSN 2405-8963)
     
  • Manufacturing Modelling, Management and Control 2013: The Proceedings of the IFAC International Conference, St Petersburg, Russia, 19-21 June 2013, N. Bakhtadze, K. Chernyshov, A. Dolgui, V. Lototsky (Eds.), Elsevier Science, 2013, IFACPapersOnline.net (ISSN 1474-6670, ISBN 978-3-902661-43-2).
     
  • Information Control Problems In Manufacturing 2012: The Proceedings of the 14th IFAC International Symposium, Bucharest, Romania, 23-25 May 2012, T. Borangiu, I. Dumitrache, A. Dolgui, F. Filip (Eds.), Elsevier Science, 2012, IFACPapersOnline.net (ISSN 1474-6670, ISBN 978-3-902661-43-2).
     
  • Information Control Problems In Manufacturing 2009: The Proceedings of the 13th IFAC International Symposium, Moscow, Russia, 3-5 June 2009, N. Bakhtadze, A. Dolgui (Eds.), Elsevier Science, 2009, IFACPapersOnline.net (ISSN 1474-6670, ISBN 978-3-902661-43-2).
     
  • Information Control Problems In Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006, A. Dolgui, G. Morel, C. Pereira (Eds.), Elsevier Science, 2006, ISBN: 978-0-08-044654-7, Volume 1: Information Systems, Control and Interoperability, 838 pages.
     
  • Information Control Problems In Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006, A. Dolgui, G. Morel, C. Pereira (Eds.), Elsevier Science, 2006, ISBN: 978-0-08-044654-7, Volume 2: Industrial Engineering, 800 pages.
     
  • Information Control Problems In Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006, A. Dolgui, G. Morel, C. Pereira (Eds.), Elsevier Science, 2006, ISBN: 978-0-08-044654-7, Volume 3: Operational Research, 702 pages.
     
  • Supply chain optimisation: product/process design, facilities location and flow control, Series: Applied Optimization, vol. 94, A. Dolgui, J. Soldek, O. Zaikin (Eds.), Springer, 2005, XVI, (Hardcover ISBN : 0-387-23566-3), 289 pages.
     
  • Modélisation et simulation pour l'analyse et l'optimisation des systèmes industriels et logistiques, Actes de la 5e conférence francophone de Modélisation et Simulation (MOSIM'04), A. Dolgui, S. Dauzère-Pérès (Eds.), Lavoisier, 2004, (ISBN : 2-7430-0731-1), vol. 1, 580 pages.
     
  • Modélisation et simulation pour l'analyse et l'optimisation des systèmes industriels et logistiques, Actes de la 5e conférence francophone de Modélisation et Simulation (MOSIM'04), A. Dolgui, S. Dauzère-Pérès (Eds.), Lavoisier, 2004, (ISBN : 2-7430-0731-1), vol. 2, 560 pages.
     
  • Production System Design, Supply Chain Management and Logistics, Proceedings of the International Conference SCM'02, A. Dolgui, J. Soldek, O. Zaikin (Eds.), Miedzyzdroje, October 23-25 2002. Informa, Szczecin, Poland, 2002, (ISBN: 83-86362-46-8), Part I, 355 pages.
     
  • Production System Design, Supply Chain Management and Logistics, Proceedings of the International Conference SCM'02, A. Dolgui, J. Soldek, O. Zaikin (Eds.), Miedzyzdroje, October 23-25 2002. Informa, Szczecin, Poland, 2002, (ISBN: 83-86362-46-8), Part II, 302 pages.
     
  • Conception, analyse et gestion des systèmes industriels, Actes de la 3e conférence francophone de Modélisation et de Simulation (MOSIM'01), A. Dolgui, F. Vernadat (Eds.), SCS Publishing House, 2001, vol. 1, (ISBN: 1-56555-212-1), 540 pages.
     
  • Conception, analyse et gestion des systèmes industriels, Actes de la 3e conférence francophone de Modélisation et de Simulation (MOSIM'01), A. Dolgui, F. Vernadat (Eds.), SCS Publishing House, 2001, vol. 2, (ISBN: 1-56555-212-1), 550 pages.
     
  • New Information Technologies in Education. Proceedings of the 2nd International Conference (NITE'96), V. Shmerko, J. Soldek, A. Dolgui and S. Yanuchkevitch (Eds.), 12-14 November 1996, Minsk, Economic University of Belarus (ISBN: 83-86359-44-7), 403 pages.
Top

BOOK CHAPTERS

  • O. Ben Ammar, F. Hnaien, H. Marian and A. Dolgui. Optimization approaches for multi-level assembly systems under stochastic lead times, In: Metaheuristics for Production Systems, Talbi, Yalaoui, and Amodeo (Eds.), Springer, 2015.
     
  • O. Hazir, A. Dolgui. Robust Assembly Line Balancing: State of the Art and New Research Perspectives, Chapter 9 in Sequencing and Scheduling with Inaccurate Data, Yu. Sotskov, F. Werner (Eds.), Nova Science Publishers, (ISBN 978-1-62948-677-2), 2014, p. 211–223.
     
  • X. Delorme, O. Battaïa, A. Dolgui. Multi-objective Approaches for Design of Assembly Lines, Chapter 2 in: Multi-Criteria and Game Theory Applications in Manufacturing and Logistics, L. Benyoucef, J.-C. Hennet and M.K. Tiwari (Eds.), Springer Series in Advanced Manufacturing, Springer, (ISBN 978-1-4471-5294-1), 2013, p. 29-55.
     
  • F. Makssoud, O. Battaïa, A. Dolgui. Reconfiguration of Machining Transfer Lines, Chapter 22 in: Service Orientation in Holonic and Multi-agent Manufacturing and Robotics, T. Borangiu, A. Thomas and D. Trentesaux (Eds.), Studies in Computational Intelligence, vol. 472, 2013, (ISBN 978-3-642-35851-7), Springer, p. 339-354.
     
  • A. Dolgui, M. Pashkevich. Beta-Binomial Model and its Generalizations in the Forecasting Demand for Multiple Slow-Moving Items. Chapter 1 in: Forecasting Models - Methods and Applications, J.J. Zhu and G.P.C. Fung (Eds.), iConcept Press Ltd, 2010 (ISBN 978-0-9807330-0-6), p. 1-12.
     
  • A. Dolgui, F. Grimaud and K. Shchamialiova. Supply Chain Management under Uncertainties: Lot-sizing and Scheduling Rules. Chapter in: Artificial Intelligence Techniques for Networked Manufacturing Enterprises Management. B. Grabot, L. Benyoucef (Eds.), Springer, 2010, (ISBN 978-1-84996-118-9), p. 181-220.
     
  • A. Dolgui, O. Guschinskaya, N. Guschinsky, G. Levin. Decision Making and Support Tools for Design of Machining Systems. Chapter in: Strategic Information Systems: Concepts, Methodologies, Tools, and Applications, M. Gordon Hunter (Ed.), Idea Group Inc., (ISBN-13: 978-1-60566-677-8), 2009, vol. 2, Development and Design Methodologies (Reprint of the chapter from Encyclopedia of Decision Making and Decision Support Technologies made by the Publishing House).
     
  • X. Delorme, A. Dolgui, M. Essafi, L. Linxe and D. Poyard. Machining Lines Automation. Part D, Chapter 35 in: Springer Handbook of Automation, S.Y. Nof (Ed.), with DVD-ROM, Springer, 2009, ISBN: 978-3-540-78830-0, p. 599-618.
     
  • T. Potinecke, T. Rogowski, X. Boucher, A. Dolgui, S. Agoti, C. Stylios, P.P. Groumpos, C. Heavey, P. Liston, P.J. Byrne, S. Salvador and M. Salvador. A View of SME Clusters and Networks in Europe, Chapter 2 in: A Road Map to the Development of European SME Networks: Towards a Collaborative Innovation, A. Villa and D. Antonelli (Eds.), Springer, (ISBN 978-1-84800-341-5), 2009, p. 23-60.
     
  • A. Dolgui, F. Hnaien, A. Louly, H. Marian. Parameterization of MRP for Supply Planning Under Uncertainties of Lead Times. Chapter 14, in: Supply Chain: Theory and Applications, V. Kordic (Ed.), I-Tech Education and Publishing, Vienna, Austria, (ISBN 978-3-902613-22-6), 2008, p. 247-262.
     
  • A. Dolgui, O. Guschinskaya, N. Guschinsky and G. Levin. Decision Making and Support Tools for Design of Machining Systems. Chapter in: Encyclopedia of Decision Making and Decision Support Technologies, F. Adam and P. Humphreys (Eds.), Idea Group Inc., (ISBN-13: 978-1-59904-843-7), 2008, vol. 1, p. 155-164.
     
  • A. Dolgui, N. Guschinsky, and G. Levin. Decision Making and Support Tools for Design of Transmission Systems. Chapter in: Encyclopedia of Decision Making and Decision Support Technologies, F. Adam and P. Humphreys (Eds.), Idea Group Inc., (ISBN-13: 978-1-59904-843-7), 2008, vol. 1, p. 165-175.
     
  • A.P. Pashkevich and A. Dolgui. Kinematic Control of a Robot-Positioner System for Arc Welding Application. Chapter 15, In: Industrial Robotics: Programming, Simulation and Applications, Kin-Huat Low (Ed.), pro literatur Verlag, Mammendorf, Germany, (ISBN: 3-86611-286-6), 2007, p. 293-314.
     
  • S. Belmokhtar, A.I. Bratcu and A. Dolgui. Modular Machining Line Design and Reconfiguration: Some Optimization Methods. Chapter 5, In: Manufacturing the Future: Concepts - Technologies - Visions, V. Kordic, A. Lazinica, M. Merdan (Eds.), pro literatur Verlag, Mammendorf, Germany, (ISBN: 3-86611-198-3), 2006, p. 125-152.
     
  • E. Kushtina, A. Dolgui, B. Malachowski. Organization of the modelling and simulation of the discrete processes. In: Information processing and security systems, Kh. Saeed, J. Pejas (Eds.), Springer, (ISBN: 0-387-25091-3), 2005, p. 443-452.
     
  • A. Dolgui, M.-A. Louly, and C. Prodhon. A survey on supply planning under uncertainties in MRP environments. In: Selected Plenaries, Milestones and Surveys. 16th IFAC World Congress. July 3-8, 2005, Prague, Czech Republic, 2005, P. Horacek, M. Simandl, and P. Zitek (Eds.), p. 228-239.
     
  • Y. Sotskov, A. Dolgui, N. Sotskova, F. Werner. Stability of optimal line balance with given station set, In: Supply chain optimisation: product/process design, facilities location and flow control, Series: Applied Optimization, vol. 94, Springer, (ISBN: 0-387-23566-3), 2005, p. 135-149.
     
  • M. Pashkevich, A. Dolgui. Consumer behavior robust modeling, In: Supply chain optimisation: product/process design, facilities location and flow control, Series: Applied Optimization, vol. 94, Springer, (ISBN: 0-387-23566-3), 2005, p. 55-70.
     
  • E. Kushtina, A. Dolgui, B. Malachowski. Organization of the modeling and simulation of the discrete processes. Computer Information Systems and Applications, vol. 1, WSFZ, Bialystok, (ISBN: 83-87256-67-6), 2004, Poland, p. 319-327.
     
  • B. Rekiek, A. Delchambre, A. Dolgui, A. Bratcu. Assembly line design: a survey. In: Plenary Papers, Survey Papers and Milestones. The 15th Triennial Word Congress of the IFAC, E.F. Camacho, L. Basañez and J.A. de la Puente (Eds.), Barcelona, IFAC, p. 131-142.
     
  • O. Zaikin, A. Dolgui, P. Korytkowski. Optimization of Resource Allocation in Distributed Production Networks. In: From Theory to Practice in Multi-Agent Systems, B. Dunin-Keplicz, E. Nawarecki (Eds.), Lecture Notes in Artificial Intelligence, vol. 2296, 2002, p. 322-332.
     
  • A. Dolgui, N. Guschinsky, et G. Levin. Computer-aided design of power transmission systems. Problemy Informatyki Stosowanej, R. Budzinski (Ed.), Szczecin, Poland, Informa, ISBN 83-87362-44-1, 2002, p. 125- 140.
     
  • A. Dolgui and G. Levin. Production Planning Optimization under Unreliable Machines and Random Yield. In: Modeling and Information Technologies for Computer-Aided Design, V. Machnach, E. Vladimirov (Eds.), Academy of Science of Belarus, Minsk, 2000, p. 113-123.
     
  • A. Dolgui. An Inventory Control Model for Replaceable Units Planning. In: Mathematical Modeling of Information and Technological Systems, V. Sysoev (Ed.), State Technological Academy Publishing House, Voronezh, 2000, p. 11-14.
     
  • O. Zaikin, A. Dolgui and P. Kraszewski. Queuing modeling of the resource assignment in the High Tec assembly manufacturing. In: New Frontiers in Computational Intelligence and its Applications, M. Mohammadian (Ed.), Amsterdam, IOS Press, 2000, p. 340-346.
     
  • A. Dolgui, N. Guschinsky and G. Levin. Optimization in Design of Multiunit Mechanical Transmission Systems. In: Systems and Control: Theory and Applications. N. Mastorakis (Ed.), New York, WSES Press, 2000, p. 101-106.
     
  • V. Balaguin and A. Dolgui. Mathematical Modelling of Systems, in V. Balaguin Theoretic Bases of Computer Aided Management, "Vyscheïchaïa chkola"(Publishing House "Highest School"), Minsk, 1991, (ISBN 5-339-00343-4), p. 150-175. (in Russian)
     
  • V. Balaguin, A. Dolgui and Y. Svirine. Design, Validation and Testing of Real Time Control Systems for Automated Production Workshop, BELNIINTI, State Committee of Plan, Minsk, 1989, 48 pages. (in Russian)
     
  • V. Balaguin, A. Dolgui, M. Revotuk and M. Mogilevtsev. Modeling and Simulation of Flexible Manufacturing Systems, BELNIINTI, State Committee of Plan Publishing House, Minsk, 1988, 56 pages. (in Russian)
Top

FOREWORDS AND PREFACES

  • A. Dolgui. Foreword, for the book: L. Benouycef, J.C. Hennet, M.K. Tiwari (Eds.), Multi-criteria and Game Theory Applications in Manufacturing and Logistics, Springer Series in Advanced Manufacturing, Springer, 2013.
     
  • A. Dolgui. Préface, pour G. Fleury, P. Lacomme. Programmation linéaire avancée : Programmes Java pour MacIntosh, Linux et Windows, Editions Ellipses, 2010, ISBN: 978-2-72985-280-1 (in French)
     
  • A. Dolgui. Foreword, for the book: D. Ivanov, B. Sokolov. Adaptive Supply Chain Management, Springer, 2009, ISBN : 978-1-84882-951-0
     
  • A. Dolgui. Foreword, for the book: B. Rekiek, A. Delchambre. Assembly line design: the balancing of mixed-model hybrid assembly lines with genetic algorithms, Springer, 2006, ISBN: 1-84628-112-1.
Top

SCIENTIFIC JOURNALS


     Editorials

  • D. Wu, D.L. Olson, A. Dolgui. Decision making in enterprise risk management: A review and introduction to special issue, Omega – The International Journal of Management Science, 2015 (accepted, in Press)
     
  • A. Dolgui. In 2012 IJPR Published its 50th Volume, International Journal of Production Research, vol. 51, n°23-24,p. 6733-6738.
     
  • D. Ivanov, A. Dolgui. Intelligent Information and Product Technologies for Supply Chain Integration, International Journal of Integrated Supply Chain Management, vol. 8, n° 1/2/3, 2013, p. 1–4.
     
  • X. Delorme, A. Dolgui, A.A. Kolokolov. Complex Optimisation Problems in Locational Analysis and Scheduling, Journal of Mathematical Modelling and Algorithms in Operations Research, vol. 12, n° 2, 2013, p. 101-103.
     
  • A. Dolgui, J.-M. Proth. Special section on Radio Frequency Identification, IEEE Transactions on Industrial Informatics, vol. 8, n° 3, 2012, p. 688.
     
  • A. Dolgui. Passing the Torch, International Journal of Production Research, vol. 50, n° 2, 2012, p. 307–308.
     
  • F. Grimaud, A. Dolgui, Discrete Event Simulation in Production and Operations Management, International Journal of Simulation and Process Modelling, vol. 6, n° 3, 2011, p. 175-176.
     
  • N. Bakhtadze, A. Dolgui, Planning and Control of Manufacturing and Logistic Systems, Annual Reviews in Control (ARC), vol. 34, n°1, 2010, p. 71-72.
     
  • R. Askin, A. Dolgui, J.-M. Proth. Design and Analysis of Production Systems, International Journal of Production Economics (IJPE), vol. 120, n° 2, 2009, p. 271-275.
     
  • A. Dolgui, Cutting Edge Production Research of the French Community, International Journal of Production Research (IJPR), vol. 47, n° 2, 2009, p. 299-304.
     
  • A. Dolgui, Design and management of production systems, Journal of Decision Systems (JDS), vol. 17, n° 3, 2008, p. 309-312.
     
  • A. Dolgui, G. Morel. Advances in Manufacturing Systems and Logistics, special section dedicated to INCOM'06, Annual Reviews in Control (ARC), vol. 31, n° 1, 2007, p. 105-106.
     
  • A. Dolgui, A. Eremeev, V. Gordon, A. Kolokolov. Special Issue on Discrete Optimization Methods in Production and Logistics (dedicated to workshop DOM'04), Journal of Mathematical Modeling and Algorithms (JMMA), vol. 5, n° 2, 2006, p. 139-141.
     
  • A. Dolgui. Feature Issue on Balancing Assembly and Transfer Lines, European Journal of Operational Research (EJOR), vol. 168, n° 3, 2006, p. 663-665.
     
  • S. Dauzère-Pérès, A. Dolgui. Decision Support for Industrial Engineering and Logistics, Journal of Decision Systems, vol. 14, n° 4, 2005, p. 353-354.
     
  • A. Dolgui. Supply Chain Management, Journal of Intelligent Manufacturing, vol. 16, n°2, 2005, p. 135-137.
     
  • A. Dolgui, F. Vernadat. Design, Analysis and Management of Industrial Systems, International Journal of Production Research, vol. 40, n° 17, 2002, p. 4307-4308.
     
  • A. Dolgui, F. Vernadat. Conception et gestion des chaînes de production, Journal Européenne des Systèmes Automatisés, vol. 36, n° 1, 2002, p. 7-8.
     
  • A. Dolgui, V. Gordon, J.M. Proth. Discrete optimisation methodes in scheduling and computer-aided design: part 2, Journal of Mathematical Modelling and Algorithms (former International Journal of Mathematical Modelling), vol. 1, n° 2, 2002, p. 87-88.
     
  • A. Dolgui, V. Gordon, J.M. Proth. Discrete optimisation methodes in scheduling and computer-aided design: part 1, International Journal of Mathematical Modelling, vol. 2, n°4, 2001, p. 249-250.
     
  • A. Dolgui, P. Lacomme. Global Optimization Techniques for Industrial Engineering, Journal of Intelligent Manufacturing, vol. 12, n° 5/6, 2001, p. 407-408.

     Articles

     In refereed international journals

  • O. Hazir, X. Delorme, A. Dolgui. A review of cost and profit oriented line design and balancing problems and solution approaches, Annual Reviews in Control, 2015 (accepted, In Press).
     
  • Y.N. Sotskov, A. Dolgui, T.-C. Lai, A. Zatsiupa. Enumerations and stability analysis of feasible and optimal line balances for simple assembly lines, Computers and Industrial Engineering, 2015 (accepted, In Press).
     
  • E.R. Gafarov, A. Dolgui, A.A. Lazarev, and F. Werner. A new effective dynamic program for an investment optimization problem, Automation and Remote Control, 2015 (accepted, In Press).
     
  • K. Afrin, A. S. Iquebal, S.K. Kumar, M.K. Tiwari, L. Benyoucef and A. Dolgui. Towards green automated production line with rotary transfer and turrets: A multi-objective approach using a binary scatter tabu search procedure, International Journal of Computer Integrated Manufacturing, 2015 (accepted, In Press).
     
  • D. Battini, X. Delorme, A. Dolgui, A. Persona, F. Sgarbossa. Ergonomics in assembly line balancing based on energy expenditure: A multi-objective model, International Journal of Production Research, 2015, (accepted, In Press).
     
  • F. Zhao, D. Wu, L. Liang, A. Dolgui. Lateral inventory transshipment problem in online-to-offline supply chain, International Journal of Production Research, 2015, (accepted, In Press).
     
  • F. Hnaien, A. Dolgui, D. Wu. Single-period inventory model for one-level assembly system with stochastic lead times and demand, International Journal of Production Research, 2015, (accepted, In Press).
     
  • M. L. Bentaha, O. Battaïa, A. Dolgui, S. Jack Hu. Second order conic approximation for disassembly line design with joint probabilistic constraints, European Journal of Operational Research, 2015, (accepted, In Press, DOI: 10.1016/j.ejor.2015.06.019).
     
  • B. Sokolov, D. Ivanov, A. Dolgui and A. Pavlov. Structural quantification of the ripple effect in the supply chain, International Journal of Production Research, 2015, (accepted, in Press, DOI: 10.1080/ 00207543.2015.1055347).
     
  • P. Ghadimia, A.H. Azadnia, C. Heavey, A. Dolgui and B. Can. A review on the buyer-supplier dyad relationships in sustainable procurement context: Past, present and future, International Journal of Production Research, 2015, (accepted, In Press).
     
  • O. Battaïa, X. Delorme, A. Dolgui, J. Hagemann, A. Horlemann, S. Kovalev, S. Malyutin. Workforce minimization for a mixed-model assembly line in the automotive industry, International Journal of Production Economics, 2015 (accepted, In Press).
     
  • A. Dolgui, S. Kovalev, E. Pesch, Approximate solution of a profit maximization constrained virtual business planning problem, Omega - The International Journal of Management Science, 2015 (accepted, In Press).
     
  • A. Dolgui, G.M. Levin, B. Rozin, I. Kasabutski. Cost optimization for series-parallel execution of a collection of intersecting operation sets, Engineering Optimization, 2015 (accepted, In Press).
     
  • O. Battaïa, D. Brissaud, A. Dolgui, N. Guschinsky. Variety-oriented design of rotary production systems, CIRP Annals Manufacturing Technology, 2015 (accepted, In Press).
     
  • E.R. Gafarov, A. Dolgui, A.A. Lazarev, Two-station single-track railway scheduling problem with trains of equal speed, Computers and Industrial Engineering, 2015 (accepted, In Press).
     
  • L. Monostori, P. Valckenaers, A. Dolgui, H. Panetto, M. Brdys, B.C. Csáji. Cooperative Control in Production and Logistics, Annual Reviews in Control, 2015, vol. 39, p. 12-29.
     
  • O. Hazir, A. Dolgui. A Decomposition Based Solution Algorithm for U-Type Assembly Line Balancing with Interval Data, Computers and Operations Research, 2015, vol. 59, p. 126-131.
     
  • D. Ivanov, A. Dolgui, B. Sokolov, F. Werner and M. Ivanova. A dynamic model and an algorithm for short-term Supply Chain scheduling in the smart factory industry 4.0, International Journal of Production Research, 2015, (accepted, In Press, DOI: 10.1080/00207543.2014.999958)
     
  • F. Zhao, D. Wu, L. Liang, A. Dolgui. Cash flow risk in dual-channel supply chain, International Journal of Production Research, vol. 53, n° 12, 2015, p. 3678-3691.
     
  • F. Makssoud, O. Battaïa, A. Dolgui, K. Mpofu, O. Olabanji. Re-balancing problem for assembly lines: new mathematical model and exact solution method, Assembly Automation, 2015, vol. 35, n° 1, p.16-21.
     
  • D. Ivanov, R. Hartl, A. Dolgui, A. Pavlov, B. Sokolov. Integration of agregate distribution and dynamic transportation planning in a Supply chain with capacity disruption and the Ripple effect consideration, International Journal of Production Research, 2014, (accepted, In Press, DOI: 10.1080/00207543.2014.986303)
     
  • M. L. Bentaha, O. Battaïa, A. Dolgui. An exact solution approach for disassembly line balancing problem under uncertainty of the task processing times, International Journal of Production Research, 2014, (accepted, In Press, DOI : 10.1080/00207543.2014.961212)
     
  • E.R. Gafarov, A. Dolgui, A.A. Lazarev, F. Werner. A Graphical Approach to Solve an Investment Optimization Problem, Journal of Mathematical Modelling and Algorithms in Operations Research, vol. 13, n° 4, 2014, p. 597-614.
     
  • M. L. Bentaha, O. Battaïa, A. Dolgui. A sample average approximation method for disassembly line balancing poblem under uncertainty, Computers and Operations Research, vol. 51, 2014, p. 111-122.
     
  • E. Gafarov, A. Dolgui, F. Werner. A Graphical Approach for Solving Single Machine Scheduling Problems Approximately, International Journal of Production Research, vol. 52, n° 13, 2014, p. 3762-3777.
     
  • M. L. Bentaha, O. Battaïa, A. Dolgui, S.J. Hu. Dealing with uncertainty in disassembly line design, CIRP Annals - Manufacturing Technology, vol. 63, n° 1, 2014, p. 21-24.
     
  • F. Makssoud, O. Battaïa, A. Dolgui. An exact optimization approach for a Transfer Line Reconfiguration Problem, International Journal of Advanced Manufacturing Technology, 2014, vol. 72, p. 717-727.
     
  • P. Korytkowski, F. Grimaud, A. Dolgui. Exponential smooting for multi-product lot-sizing with Heijunka and varying demand, Management and Production Engineering Review, vol. 5, n° 2, 2014, p. 20-26.
     
  • D. Ivanov, B. Sokolov, A. Dolgui, The Ripple effect in supply chains: trade-off "efficiency-flexibility-resilience" in supply chain disruption management, International Journal of Production Research, vol. 52, n° 7, 2014, p. 2154-2172.
     
  • M.A. Aloulou, A. Dolgui, M.Y. Kovalyov. A bibliography of non-deterministic lot-sizing models, International Journal of Production Research, vol. 52, n° 8, 2014, p. 2293-2310.
     
  • A. Dolgui, S. Kovalev, M.Y. Kovalyov, J. Nossack and E. Pesch. Minimizing setup costs in a transfer line design problem with sequential operation processing, International Journal of Production Economics, vol. 151, 2014, p. 186-194.
     
  • P. Borisovsky, X. Delorme, A. Dolgui. Balancing recongurable machining lines via a set partitioning model, International Journal of Production Research, vol. 52, n° 13, 2014, p. 4026-4036.
     
  • O. Battaïa, A. Dolgui, N. Guschinsky, G. Levin. Combinatorial techniques to optimally customize an automated production line with rotary transfer and turrets, IIE Transactions, vol. 46, 2014, p. 867-879.
     
  • E.R. Gafarov, A. Dolgui. Two-dedicated-machine scheduling problem with precedence relations to minimize makespan, Optimization Letters, vol. 8, n° 4, 2014, p. 1443-1451.
     
  • O. Battaïa, A. Dolgui, N. Guschinsky, G. Levin. Integrated configurable equipment selection and line balancing for mass production with serial-parallel machining systems, Engineering Optimization, vol. 46, n° 10, 2014, p. 1369-1388.
     
  • D. Ivanov, B. Sokolov, A. Dolgui. Multi-stage supply chain scheduling with nonpreemptive continuous operations and execution control, International Journal of Production Research, vol. 52, n° 13, 2014, p. 4059-4077.
     
  • D. Wu, C. Luo, L. Liang, A. Dolgui. Efficiency evaluation model with constraint resource: an application to banking operations, Journal of the Operational Research Society, 2013, (accepted, available online, doi:10.1057/jors.2012.144).
     
  • A. Dolgui, J.M. Proth. Outsourcing: definitions and analysis, International Journal of Production Research, vol. 51, n° 23-24, p. 6769-6777.
     
  • A. Dolgui, O. Ben Ammar, F. Hnaien, and M.-A. Louly, A state of the art on supply planning and inventory control under lead time uncertainty, Studies in Informatics and Control, vol. 22, n° 3, 2013, p. 255-268.
     
  • D. Ivanov, A. Dolgui, B. Sokolov. Multi-disciplinary analysis of interfaces "Supply Chain Event Management - RFID - Control Theory", International Journal of Integrated Supply Chain Management, vol. 8, n° 1/2/3, 2013, p. 52-66.
     
  • P. Borisovsky, X. Delorme, A. Dolgui. Genetic algorithm for balancing reconfigurable machining lines, Computers and Industrial Engineering, vol. 66, n° 3, 2013, p. 541-547.
     
  • K. Schemeleva, X. Delorme, A. Dolgui, F. Grimaud, M.Y. Kovalyov. Lot-sizing on a single imperfect machine: ILP models and FPTAS extensions, Computers and Industrial Engineering, vol. 65, n° 4, 2013, p. 561-569.
     
  • O. Hazir, A. Dolgui. Assembly Line Balancing under Uncertainty: Robust Optimization Models and an Exact Solution Method, Computers and Industrial Engineering, vol. 65, n° 2, 2013, 261-267.
     
  • E. Gurevsky, O. Battaïa, A. Dolgui. Measure of stability for a generalized assembly line balancing problem, Discrete Applied Mathematics, vol. 161, n° 3, 2013, p. 377–394.
     
  • E. Gurevsky, O. Hazir, O. Battaïa, A. Dolgui. Robust balancing of straight assembly lines with interval task times, Journal of Operational Research Society, vol. 64, n° 11, 2013, p. 1607-1613.
     
  • A. Dolgui, A. Eremeev, M. Kovalyov, V. Sygaev. Complexity of buffer capacity allocation problems for production lines with unreliable machines, Journal of Mathematical Modelling and Algorithms in Operations Research, vol. 12, n° 2, 2013, p. 155-165.
     
  • O. Battaia, E. Gurevsky, F. Makssoud, A. Dolgui. Equipment location in machining transfer lines with multi-spindle heads, Journal of Mathematical Modelling and Algorithms in Operations Research, vol. 12, n° 2, 2013, p. 117-133.
     
  • O. Battaïa, A. Dolgui. A taxonomy of line balancing problems and their solution approaches, International Journal of Production Economics, vol. 142, n° 2, 2013, p. 259-277.
     
  • A. Garcia-Villoria, A. Corominas, X. Delorme, A. Dolgui, W. Kubiak, and R. Pastor. A branch and bound algorithm for the response time variability problem, Journal of Scheduling, vol. 16, n° 2, 2013 p. 243-252.
     
  • O. Battaïa, A. Dolgui, N. Guschinsky, G. Levin. Optimal design of machines processing pipeline parts, International Journal of Advanced Manufacturing Technology, vol. 63, n° 9-12, 2012, p. 963–973.
     
  • M.-A. Louly, A. Dolgui, Optimal MRP parameters for a single item inventory with random replenishment lead time, POQ policy and service level constraint, International Journal of Production Economics, vol. 143, n°1, 2013, p. 35-40.
     
  • V. Gordon, V. Strusevich, A. Dolgui, Scheduling with due date assignment under special conditions on job processing, Journal of Scheduling, vol. 15, n° 4, 2012, p. 447–456.
     
  • E. Gurevsky, O. Battaïa, A. Dolgui. Balancing of simple assembly lines under variations of task processing times, Annals of Operations Research, vol. 201, n° 1, 2012, p. 265-286.
     
  • K. Schemeleva, X. Delorme, A. Dolgui, and F. Grimaud. Multi-product sequencing and lot-sizing under uncertainties: a memetic algorithm, Engineering Applications of Artificial Intelligence, vol. 25, n°8, 2012, p. 1598-1610.
     
  • O. Battaïa, A. Dolgui, N. Guschinsky, G. Levin. A decision support system for design of large series machining lines composed of stations with rotary or mobile table, Robotics and Computer Integrated Manufacturing, vol. 28, n°6, 2012, p. 672-680.
     
  • A. Dolgui, S. Kovalev. Scenario Based Robust Line Balancing: Computational Complexity, Discrete Applied Mathematics, vol. 160, n° 13-14, 2012, p. 1955-1963.
     
  • P. Borisovsky, A. Dolgui, S. Kovalev. Algorithms and implementation of a set partitioning approach for modular machining line design, Computers and Operations Research, vol. 39, n° 12, 2012, p. 3147-3155.
     
  • A. Dolgui, S. Kovalev. Min-Max and Min-Max Regret Approaches to Minimum Cost Tools Selection, 4OR: A Quarterly Journal of Operations Research, vol. 10, n° 2, 2012, p. 181–192.
     
  • M. Essafi, X. Delorme, A. Dolgui. A Reactive GRASP and Path Relinking for Balancing Reconfigurable Transfer Lines, International Journal of Production Research, vol. 50, n° 18, 2012, p 5213-5238.
     
  • H. Chehade, A. Dolgui, F. Dugardin, L. Makdessian, F. Yalaoui. Multi-Objective Approach for Production Line Equipment Selection, Management and Production Engineering Review, vol. 3, n° 1, 2012, p. 4-17.
     
  • D. Ivanov, A. Dolgui, B. Sokolov. Applicability of optimal control theory for adaptive supply chain planning and scheduling, Annual Reviews in Control, vol. 36, n° 1, 2012, p. 73-84.
     
  • S. Kovalev, X. Delorme, A. Dolgui, Manufacturing line configuration to minimize setup costs, Mathematical and Computer Modelling, vol. 55, n° 9-10, 2012, p. 2087–2095.
     
  • O. Battaïa, A. Dolgui, Reduction approaches for a generalized line balancing problem, Computers and Operations Research,vol. 39, n° 10, 2012, p. 2337-2345.
     
  • A. Dolgui, N. Guschinsky, G. Levin. Enhanced mixed integer programming model for a transfer line design problem, Computers and Industrial Engineering,, vol. 62, n° 2, 2012, p. 570-578.
     
  • P. Borisovsky, A. Dolgui, S. Kovalev, Modelling transfer line design problem via a set partitioning problem, Optimization Letters, vol. 6, n° 5, 2012, p. 915-926.
     
  • X. Delorme, A. Dolgui, M.Y. Kovalyov, Combinatorial design of a minimum cost transfer line, Omega - International Journal of Management Science, vol. 40, n° 1, 2012, p. 31-41.
     
  • M.-A. Louly, A. Dolgui, A. Al-Ahmari, Optimal MRP offsetting for assembly systems with stochastic lead times: POQ policy and service level constraint, Journal of Intelligent Manufacturing, vol. 23, n° 6, 2012, p. 2485-2495.
     
  • M.-A. Louly, A. Dolgui, A note on analytic calculation of planned lead times for assembly systems under POQ policy and service level constraint, International Journal of Production Economics, vol. 140, n° 2, 2012, p. 778–781.
     
  • A. Dolgui, V. Gordon, V. Strusevich, Single Machine Scheduling with Precedence Constraints and Positionally Dependent Processing Times, Computers and Operations Research, vol. 39, n° 6, 2012, p. 1218-1224.
     
  • A. Dolgui, M.Y. Kovalyov, K. Shchamialiova. Multi-Product Lot-Sizing and Sequencing on a Single Imperfect Machine, Computational Optimization and Applications, vol. 50, n° 3, 2011, p. 465-482.
     
  • O. Guschinskaya, E. Gurevsky, A. Dolgui, A. Eremeev, Metaheuristic approaches for the design of machining lines, International Journal of Advanced Manufacturing Technology, vol. 55, n°1, 2011, p. 11-22.
     
  • Y. Orlovich, A. Dolgui, G. Finke, V. Gordon, F. Werner. The complexity of dissociation set problems in graphs, Discrete Applied Mathematics, vol. 159, n°13, 2011, p. 1352-1366.
     
  • Y. Orlovich, J. Blazewicz, A. Dolgui, G. Finke, V. Gordon. On the complexity of the independent set problem in triangle graphs, Discrete Mathematics, vol. 311, n° 16, 2011, p. 1670-1680.
     
  • M.-A. Louly, A. Dolgui, Optimal time phasing and periodicity for MRP with POQ policy, International Journal of Production Economics, vol. 131, n°1, 2011, p. 76-86.
     
  • M. Essafi, X. Delorme, A. Dolgui, Balancing lines with CNC machines: a multi-start Ant based heuristic, CIRP Journal of Manufacturing Science and Technology, vol. 2, 2010, p. 176-182.
     
  • V.S. Gordon, A. Dolgui, Scheduling theory problems with given partial order, Automation and Remote Control, vol. 71, n°10, 2010, p. 2029-2037.
     
  • M. Essafi, X. Delorme, A. Dolgui, Balancing machining lines: a two-phase heuristic, Studies in Informatics and Control, vol. 19, n°3, 2010, p. 243-252.
     
  • F. Hnaien, A. Dolgui and M.-A. Louly, Key Performance Indicators for Supply Planning of Multilevel Serial Systems with Stochastic Lead Times, Control and Cybernetics, vol. 39, n°1, 2010, p. 133-148.
     
  • A. Dolgui, J.-M. Proth, Pricing Strategies and Models, Annual Reviews in Control, vol. 34, n° 1, 2010, p. 101-110.
     
  • A. Dolgui, A. Eremeev, M. Kovalyov, P. Kuznetsov, Multi-Product Lot-Sizing and Scheduling on Unrelated Parallel Machines, IIE Transactions, vol. 42, n° 7, 2010, p. 514-524.
     
  • F. Hnaien, X. Delorme, and A. Dolgui, Multi-objective optimization for inventory control in two-level assembly systems under uncertainty of lead times, Computers and Operations Research, vol. 37, n° 11, 2010, p. 1835-1843.
     
  • M. Essafi, X. Delorme, A. Dolgui, O. Guschinskaya, A MIP Approach for Balancing Transfer Lines with Complex Industrial Constraints, Computers and Industrial Engineering, vol. 58, n°3, 2010, p. 393–400.
     
  • O. Guschinskaya, A. Dolgui, Equilibrage de lignes de production : état de l'art, Journal Européen des Systèmes Automatisés, vol. 44, n°9-10, 2010, p. 1081-1119. (in French).
     
  • A. Dolgui, D. Ofitserov, Some heuristics for makespan minimization in permutation flow-shop, Management and Production Engineering Review, vol.1, n°4, 2010, p. 19-25.
     
  • A. Dolgui, M. Pashkevich, Forecasting Demand for Slow-Moving Items in Case of Reporting Errors, Risk and Decision Analysis, vol. 1, n° 4, 2009, p. 221-230.
     
  • O. Guschinskaya, and A. Dolgui, Comparison of Exact and Heuristic Methods for a Transfer Line Balancing Problem, International Journal of Production Economics, vol. 120, n° 2, 2009, p. 276-286.
     
  • S.S. Chauhan, A. Dolgui, and J.-M. Proth, A continuous model for supply planning of assembly systems with stochastic component procurement times, International Journal of Production Economics, vol. 120, n° 2, 2009, p. 411-417.
     
  • O. Guschinskaya, A. Dolgui, Configuration des lignes d'usinage à boîtiers multibroches : une approche mixte, RAIRO Operations Research, vol. 43, 2009, p. 277-296. (in French)
     
  • F. Hnaien, X. Delorme, and A. Dolgui, Genetic Algorithm for Supply Planning in Two-Level Assembly Systems with Random Lead Times, Engineering Applications of Artificial Intelligence, vol. 22, 2009, p. 906-915.
     
  • A. Dolgui, and A. Pashkevich, Manipulator motion planning for high-speed robotic laser cutting, International Journal of Production Research, vol. 47, n° 20, 2009, p. 5691-5715.
     
  • A. Dolgui, N. Guschinsky, and G. Levin, A Design of DSS for Mass Production Machining Systems, The Bulletin of the Polish Academy of Sciences ­ Technical Sciences, vol. 57, n° 3, 2009, p. 265-271.
     
  • A. Dolgui, I. Ihnatsenka. Branch and Bound Algorithm for a Transfer Line Design Problem: Stations with Sequentially Activated Multi-spindle Heads, European Journal of Operational Research, vol. 197, n°3, 2009, p. 1119-1132.
     
  • M.-A. Ould Louly, A. Dolgui. Calculating Safety Stocks for Assembly Systems with Random Component Procurement Lead Times: Branch and Bound Algorithm. European Journal of Operational Research, vol. 199, n°3, 2009, p. 723-731.
     
  • L. Capacho, R. Pastor, A. Dolgui, O. Guschinskaya. An Evaluation of Constructive Heuristic Methods for Solving the Alternative Subgraphs Assembly Line Balancing Problem, Journal of Heuristics, vol. 15, 2009, p. 109-132.
     
  • A. Dolgui, N. Guschinsky, G. Levin, Graph approach for optimal design of transfer machine with rotary table, International Journal of Production Research, vol. 47, n° 2, 2009, p. 321-341.
     
  • A. Bratcu, A. Dolgui, Some new results on the analysis and simulation of bucket brigades (self-balancing production lines), International Journal of Production Research, vol. 47, n° 2, 2009, p. 369-388.
     
  • O. Guschinskaya, A. Dolgui, N. Guschinsky, G. Levin. Minimizing Makespan for Multi-Spindle Head Machines with a Mobile Table, Computers and Operations Research, vol. 36, n° 2, 2009, p. 344-357.
     
  • A. Dolgui and I. Ihnatsenka, Balancing modular transfer lines with serial-parallel activation of spindle heads at stations, Discrete Applied Mathematics, vol. 157, n° 1, 2009, p. 68-89.
     
  • P. Borisovsky, A. Dolgui, A. Eremeev. Genetic Algorithms for a Supply Management Problem: MIP-Recombination vs Greedy Decoder, European Journal of Operational Research, vol. 195, n° 3, 2009, p. 770-779.
     
  • M.-A. Ould Louly, A. Dolgui, and F. Hnaien, Supply planning for single-level assembly system with stochastic component delivery times and service level constraint, International Journal of Production Economics, vol. 115, n°1, 2008, p. 236-247.
     
  • M.-A. Ould Louly, A. Dolgui, and F. Hnaien, Optimal Supply Planning in MRP Environments for Assembly Systems with Random Component Procurement Times, International Journal of Production Research, vol. 46, n°19, 2008, p. 5441-5467.
     
  • F. Hnaien, A. Dolgui, and M.-A. Ould Louly, Planned Lead Time Optimization in MRP Environment for Multilevel Production Systems, Journal of Systems Science and Systems Engineering, 2008, vol. 17, n° 2, p. 132-155.
     
  • A. Dolgui, M. Pashkevich. Extended Beta-Binomial Model for Demand Forecasting of Multiple Slow-Moving Items, International Journal of Systems Science, 2008, vol. 39, n° 7, p. 713-726.
     
  • A. Dolgui, M. Pashkevich. Demand Forecasting For Multiple Slow-Moving Items With Short Requests History and Unequal Demand Variance, International Journal of Production Economics, 2008, vol. 112, n° 2, p. 885-894.
     
  • A. Dolgui, N. Guschinsky and G. Levin. Exact and Heuristic Algorithms for Balancing Transfer Lines when a Set of Available Spindle Heads is Given, International Transactions in Operational Research, 2008, vol. 15, n° 3, p. 339-357.
     
  • A. Dolgui, N. Guschinsky, G. Levin and J.-M. Proth. Optimisation of multi-position machines and transfer lines, European Journal of Operational Research, vol. 185, n°3, 2008, p. 1375-1389.
     
  • L. Makdessian, F. Yalaoui, and A. Dolgui, Optimisation de lignes de production : cas monocritère, Journal of Decision Systems, vol. 17, n° 3, 2008, p. 313-336. (in French)
     
  • A. Dolgui, M. Pashkevich, M. Pashkevich, F. Grimaud. Forecasting risk analysis for supply chains with intermittent demand. IJRAM-International Journal of Risk Assessment and and Management, 2008, vol. 9, n° 3, p. 213-224.
     
  • L. Makdessian, F. Yalaoui and A. Dolgui, Optimisation de lignes de production : une approche multicritère, Journal of Decision Systems, vol. 17, n° 3, 2008, p. 337-368. (in French)
     
  • O. Guschinskaya, A. Dolgui. A Transfer Line Balancing Problem by Heuristic Methods: Industrial Case Studies, Decision Making in Manufacturing and Services, vol. 2, n° 1-2, 2008, p. 33-46.
     
  • O. Guschinskaya, A. Dolgui, N. Guschinsky, G. Levin. A Heuristic Multi-Start Decomposition Approach for Optimal Design of Serial Machining Lines, European Journal of Operational Research, 2008, vol. 189, n°3, p. 902-913.
     
  • B. Finel, A. Dolgui, F. Vernadat. A Random Search and Backtracking Procedure for Transfer Line Balancing, International Journal of Computer Integrated Manufacturing, vol. 21, n° 4, 2008, p. 376-387.
     
  • A. Dolgui, M. Pashkevich, On the performance of binomial and beta-binomial models of demand forecasting for multiple slow-moving inventory items, Computers and Operations Research, 2008, vol. 35, n°3, p. 893-905.
     
  • M. Lamiri, X. Xie, A. Dolgui, F. Grimaud. A stochastic model for operating room planning with elective and emergency demand for surgery, European Journal of Operational Research, 2008, vol. 185, n° 3, p. 1026-1037.
     
  • A. Dolgui, C. Prodhon. Supply planning under uncertainties in MRP environments: a state of the art, Annual Reviews in Control, 2007, vol. 31, p. 269-279.
     
  • A. Dolgui, N. Guschinsky, G. Levin. Optimization of Power Transmission Systems Using a Multi-Level Decomposition Approach, RAIRO Operations Research, 2007, vol. 41, p. 213-229.
     
  • A. Dolgui, A.V. Eremeev, V.S. Sigaev. HBBA: Hybrid Algorithm for Buffer Allocation in Tandem Production Lines, Journal of Intelligent Manufacturing, vol. 18, n° 3, 2007, p. 411-420.
     
  • V.M. Demidenko, A. Dolgui. Effectively Solvable Cases of the Quadratic Assignment Problem with Generally Monotonous and Incomplete Matrices, Cybernetics and Systems Analysis, vol. 43, n°1, 2007, p. 112-125.
     
  • F. Hnaien, A. Dolgui, H. Marian and M.-A. Louly. Planning order release dates for multilevel linear supply chain with random lead times, Systems Science, 2007, vol. 31, n°1, p. 19-25.
     
  • S. Belmokhtar, A. Dolgui, I. Ignatenko and X. Delorme. Optimizing modular machining line design problem with mixed activation mode of machining units, Decision Making in Manufacturing and Services, 2007, vol. 1, n° 1-2, p. 35-48.
     
  • A. I. Bratcu, A. Dolgui. Une généralisation du Modèle Normatif des lignes auto-équilibrées (« bucket brigades »), Journal Européen des Systèmes Automatisés, 2007, vol. 41, n°3-4, p. 287-309. (in French)
     
  • A. Dolgui, B. Finel, O. Guschinskaya, N. Guschinsky, G. Levin, F. Vernadat, Balancing large-scale machining lines with multi-spindle heads using decomposition, International Journal of Production Research, 2006, vol. 44, n°18-19, p. 4105-4120.
     
  • S. Belmokhtar, A. Dolgui, N. Guschinsky, G. Levin. An integer programming model for logical layout design of modular machining lines, Computers and Industrial Engineering, 2006, vol. 51, n°3, p. 502-518.
     
  • A. Dolgui, B. Finel, N. Guschinsky, G. Levin and F. Vernadat. MIP Approach to Balancing Transfer Lines with Blocks of Parallel Operations, IIE Transactions, 2006, vol. 38, n°10, p. 869-882.
     
  • A. Dolgui, A. Pashkevich. Cluster-level operations planning for the out-of-position robotic arc-welding. International Journal of Production Research, 2006, vol. 44, n°4, p. 675-702.
     
  • A. Dolgui, N.Guschinsky, G. Levin. A Special Case of Transfer Lines Balancing by Graph Approach, European Journal of Operational Research, vol. 168, n°3, 2006, p. 732-746.
     
  • Y. Sotskov, A. Dolgui, M.C. Portmann. Stability Analysis of Optimal Balance for Assembly Line with Fixed Cycle Time. European Journal of Operational Research, 2006, vol. 168, n°3, p. 783-797.
     
  • A. Dolgui, N. Guschinsky, G. Levin. A Decomposition Method for Transfer Line Life Cycle Cost Optimisation. Journal of Mathematical Modeling and Algorithms, 2006, vol. 5, n°2, p. 215-238.
     
  • O. Zaikin, A. Dolgui, E. Kushtina, P. Korytkowski. Optimization of capacity in an intangible production, Control Sciences, 2005, n°6, p. 22-27.
     
  • A. Dolgui, O. Guschinskaya, N.Guschinsky, G. Levin. Conception de systèmes de fabrication: prototype d'un logiciel d'aide à la décision. Journal of Decision Systems, 2005, vol. 14, n°4, p. 489-516. (in French)
     
  • A. Dolgui, G. Levin, M.A. Louly. Decomposition approach for a problem of lot-sizing and sequencing under uncertainties, International Journal of Computer Integrated Manufacturing, vol. 18, n°5, July-August, 2005, p. 376-385.
     
  • A. Bratcu, A. Dolgui. A Survey of the Self-Balancing Production Lines ("Bucket Brigades"). Journal of Intelligent Manufacturing, vol. 16, n°2, 2005, p. 139-158.
     
  • A. Dolgui, B. Finel, N. Guschinsky, G. Levin, and F. Vernadat. An heuristic approach for transfer lines balancing. Journal of Intelligent Manufacturing, vol. 16, n°2, 2005, p. 159-171.
     
  • A. Pashkevich, A. Dolgui, O. Chumakov. Multiobjective optimization of robot motion for laser cutting application. International Journal of Computer Integrated Manufacturing, 2004, vol. 17, n°2, p. 171-183.
     
  • M.-A. Ould Louly, A. Dolgui. The MPS Parametrization under Lead Time Uncertainty. International Journal of Production Economics, n°90, 2004, p. 369-376.
     
  • M.-A. Louly, A. Dolgui. Une méthode arborescente pour la planification des réapprovisionnements. Journal Européen des Systèmes Automatisés, vol. 38, n°7-8, 2004, p. 809-825. (in French).
     
  • A. Dolgui, O. Zaikin, E. Kushtina, P. Koritkowski. Modelling and optimization of the processing nodes performance in computer aided control systems of distributed production of printer matter. Automation and Remote Control, 2003, vol. 64, n°9, p. 1501-1506.
     
  • A. Pashkevich, A. Dolgui, K. Semkin. Kinematics aspects of a robot positioned in an arc wending application. Control Engineering Practice, 2003, vol. 11/6, p. 633-647
     
  • A. Dolgui, V. Sysoev. Une heuristique d'optimisation globale basée sur la psi- transformation. RAIRO Operations Research, 2003, vol. 37, p. 119-141.
     
  • B. Rekiek, A. Dolgui, A. Delchambre, A. Bratcu. State of art of assembly lines design optimization. Annual Reviews in Control, 2002, 26/2, p. 163-174.
     
  • M.-A. Ould Louly, A. Dolgui. Generalized newsboy model to compute the optimal planned lead times in assembly systems. International Journal of Production Research, 2002, vol. 40, n°17, p. 4401-4414.
     
  • A. Dolgui, M.-A. Ould Louly. A Model for Supply Planning under Lead Time Uncertainty. International Journal of Production Economics, n°78, 2002, p. 145-152.
     
  • M.-A. Ould Louly, A. Dolgui. Supply chain management under uncertainties. International Journal of Agile Manufacturing, 2002, vol. 5, n°1, p. 17-26.
     
  • A. Dolgui, A. Ereemev, A. Kolokolov, et V. Sigaev. Buffer Allocation in Production Line with Unreliable Machines. Journal of Mathematical Modeling and Algorithms, n°2, 2002, p. 89-104.
     
  • A. Dolgui. Performance Analysis Model for Systems Described by Renewal Process. Engineering Simulation (Electronic Modeling), vol. 24, n°2, 2002, p. 3–11.
     
  • A. Dolgui, N. Guschinsky, Y. Harrath, et G. Levin. Une approche de programmation linéaire pour la conception des lignes de transfert. Journal Européen des Systèmes Automatisés, vol. 36, n°1, 2002, p. 11-33. (in French)
     
  • Y. Sotskov, A. Dolgui and F. Werner. Unit-time Job-shop Scheduling via Mixed Graph Coloring. International Journal of Mathematical Algorithms, 2001, vol. 2, n°4, p. 289-325.
     
  • A. Dolgui. On a Model of Joint Control of Reserves in Automatic Control Systems of Production. Automation and Remote Control, 2001, vol. 62, n° 12, p. 2020-2026.
     
  • A. Dolgui and D. Ofitserov. A Stochastic Method for Discrete and Continuous Optimization in Manufacturing Systems. Journal of Intelligent Manufacturing, vol. 8, n°5, 1997, p. 405-413.
     
  • A. Dolgui, M.C. Portmann, J.M. Proth. Planification de systèmes d'assemblage avec approvisionnement aléatoire en composants. Journal of Decision Systems, vol. 4, n°4, 1995, p. 255-279. (in French)
     
  • V. Balaguin, A. Dolgui , D. Ofitserov, M. Revotuk, V. Starych, A. Smirnov. Computer Simulation of Flexible Manufacturing Systems. at-Automatisierungstechnik, 1988, n°1, p. 8–12. (in German).
     

     In refereed national journals

  • N.N. Guschinsky, O. Battaia, A. Dolgui. Models and methods for synthesis of manufacturing process structure for machining at flow line of stationary machines, Informatika, n° 3 (47), 2015, p. 72–80 (a journal of National Academy of Sciences of Belarus, ISSN 1816-0301, in Russian)
     
  • G.M. Levin, B.M. Rozin, A. Dolgui. Linear approximation for optmisation of intensities of sequential-parallel execution of intersecting operation sets, Informatika, n° 3 (43), 2014, p. 44-51 (a journal of National Academy of Sciences of Belarus, ISSN 1816-0301, in Russian).
     
  • V. Gordon, A. Dolgui, V. Strusevich. Schedules with precedence restriction and position-dependent servicing durability, Doklady of the National Academy of Sciences of Belarus, vol. 54, n°4, 2010, p. 47-52. (in Russian)
     
  • Yu.L. Orlovich, V.S. Gordon, F. Werner, A. Dolgui, G. Finke, Complexity of dissociation set problems in some hereditary classes of graphs, Doklady of the National Academy of Sciences of Belarus, vol. 53, n°3, 2009, p. 16–20. (in Russian)
     
  • O. Zaikin, A. Dolgui, E. Kushtina, B. Malachowski. Optimization of a virtual publishing production system. Electronic Modelling (former Engineering Simulation), 2006, vol. 28, n°5, p. 31-46. (in Russian)
     
  • A. Dolgui. Design and balancing of automated manufacturing lines, Izvestia Ingenernoj Akademii Belarusi (Proceedings of the Engineering Academy of Belarus), vol. 5, n°1(19), 2005, p. 15-23.
     
  • A. Dolgui, M. Pashkevich. Robust stochastic demand model for inventory management of slow-mowing items. Izvestia Ingenernoj Akademii Belarusi (Proceedings of the Engineering Academy of Belarus), vol. 4, n°1(17), 2004, p. 63-66.
     
  • A. Dolgui, N. Guschinsky, O. Guschinskaya, G. Levin. Methods for Decision Making in the Design of Multiposition Equipment. Artificial Intelligence (Iskustvennij Intellect, Ukraine), 2004, n°2, p. 413-417.
     
  • A. Dolgui, N. Guschinsky, G. Levin. Decomposition Method to Optimise the Structure and Parameters of Transfer Line with Parallel and Sequential Machining. The Annals of "Dunarea de Jos"University of Galati (ISSN 1221-454X), 2003, Romania, p. 28-35.
     
  • A. Dolgui, M. Pashkevich Generalized beta-binomial model for biometrical data, News of the Belarussian Academy of Engineering, 1 (15), 2003, p.120-123.
     
  • A. Dolgui, N. Guschinsky, et G. Levin. Decision making in design of multiunit power transmissions. Artificial Intelligence (Iskustvennij Intellect, Ukraine), n°2, 2002, p. 338-344.
     
  • A. Dolgui. Some Remarks on Model of Systems Described by the Renewal Processes. Vestsi AN Belarusi (Proceedings of Belarus National Academy of Sciences): ser. ph.-tech. navuk, Minsk, 1999, n°3, p. 89-92. (in Russian)
     
  • A. Dolgui and Y. Svirine. Modelling and Estimation of Automated Workshop Performances. Vestsi AN Belarusi (Proceedings of Belarus Academy of Sciences): ser. ph.-tech. navuk, Minsk, 1995, n°1, p. 59-67. (in Russian)
     
  • Y. Svirine, I. Gontcharov, A. Dolgui and A. Raskine. GPSS-Model of a Flexible Manufactirung Systems. Voprosi Radiolektroniki (Questions of Radio-Electronic Industry: CAD/CAM), Moscow, 1989, n°1, p. 34-42. (in Russian)
     
  • A. Dolgui and Y. Svirine. Analysis of Control Algorithms for Conveyors in a Flexible Workshop. Elektornnaia Technika (Electronic Technique: Economy and Control Systems), Moscow, 1989, n°3 (72), p. 30-34. (in Russian)
     
  • A. Dolgui and M. Revotuk. Simulation of Machines for Real Time Testing of Flexible Workshop Control Systems. Elektronnaia Technika (Electronic Technique: Economy and Control Systems), Moscow, 1988, n°2 (67), p. 48-55. (in Russian)
     
  • A. Dolgui. A Stochastic Model of Automated Production Line. Avtomatika i Vitchislitelnaïa Technika (Automation and Computer Machinery), Minsk, 1988, n°17, p. 63-68. (in Russian)
     
  • M. Revotuk, S. Miasnikov and A. Dolgui. Simulation of Flexible Manufacturing Systems Based on Interpreted Petri Nets. Avtomatika i Vitchislitelnaïa Technika (Automation and Computer Machinery), Minsk, 1987, n°16, p. 88-92. (in Russian)
     
  • Y. Svirine and A. Dolgui. Analysis of Efficiency of an Automated Production Line. Elektronnaia Technika (Electronic Technique: Economy and Control Systems), Moscow, 1986, n°1 (58), p. 35-40. (in Russian)
     
Top

CONFERENCES


     Invited talks

     Plenary speeches

  • A. Dolgui. Inventory control and risk management in supply chains under lead time uncertainties, 2015 IEEE Symposium on Analytics and Risk in Complex Management Systems (ISARCRM 2015), Beijing, University of Chinese Academy of Sciences, August 14-15, 2015 (Invited plenary talk).
     
  • A. Dolgui. Editorial Policy of the International Journal of Production Research. IIE International Conference on Engineering Systems and Networks: The way ahead for industrial engineering and operations management (ICIEOM-CIO-IIIE 2015), Universidade de Aveiro, Portugal, July 6th · 8th, 2015 (Invited plenary talk).
     
  • A. Dolgui. Combinatorial design of production lines. Shaastrarth 2015: International Conference on Adavced Research Applications in Engineering and Technology, June 29-30, 2015, Rungta College of Engineering & Technology, Bhilai, India, p. 3-15 (Invited plenary talk).
     
  • O. Battaïa, X. Delorme, A. Dolgui, N. Guschinsky, M. Kovalyov, G. Levin. Combinatorial design of complex machines and machining lines. Proceedings of the 6th International Conference "Tanaev's Readings", March 27-28, 2014, Minsk, National Academy of Sciences of Belarus, ISBN 978-985-6744-82-5, p. 171-178. (Invited plenary talk).
     
  • A. Dolgui. An example of university-industry based R&D for machining industry in France. The 34th Conference for Operations Research and Industrial Engineering (YAEM 2014), June 25-27, 2014, Görükle Campus of Uludag University, Bursa, Turkey. (Invited plenary talk).
     
  • A. Dolgui. Global Perspectives on Industrial Engineering. CIO-ICIEOM-IIE International Conference on on Industrial Engineering and Industrial Management, 23-25 July 2014, Malaga. (Invited plenary talk).
     
  • A. Dolgui. Replenishements Planning under Lead Time Uncertainties, 4th International Conference on Complex Science Management, November 23-24, 2013, Wuhan, China. (Invited plenary talk).
     
  • A. Dolgui, Optimization techniques for MRP parametrization under lead time uncertainties, The First International Conference on Reasoning and Optimization in Information Systems (ROIS'2013), September 6-7, 2013, Hammam- Sousse, Tunisia. (Invited plenary talk).
     
  • A. Dolgui, Utilisation des modèles stochastiques et des techniques d'optimisation combinatoire pour le paramétrage de MRP (Manufacturing Resource Planning), Colloque sur l'Optimisation et les Systèmes d'Information (COSI'2013), 9-11 juin 2013, Alger, Algérie. (Invited plenary talk).
     
  • A. Dolgui, J.-M. Proth. Assembly Line Balancing: Conventional Methods and Extensions, Invited plenary talk, Proceedings of the IFAC Conference on Manufacturing Modelling, Management and Control (MIM'2013), St Petersburg, Russia, June 19-21, 2013, N. Bakhtadze, K. Chernyshov, A. Dolgui, V. Lototsky (Eds.), Elsevier Science, 2013, IFAC-PapersOnline.net (ISSN 1474-6670), p. 43-48. (Invited plenary talk).
     
  • A. Dolgui. Optimization in Design of Automated Machining Systems, The 9th International Conference on Informatics in Control, Automation and Robotics (ICINCO'2012), Rome, Italy, July 28-31, 2012. (Invited plenary talk).
     
  • A. Dolgui. Decision-aid support in design of machining systems, The International Conference on Industrial Engineering & Manufacturing (ICIEM'2012), Batna, Algeria, May 6-7, 2012, 2 pages. (Invited plenary talk).
     
  • A. Dolgui. Operations Research Techniques for Design and Analysis of Lean Manufacturing Systems, Preprints of the 4th IFAC conference on Management and Control in Manufacturing and Logistics (MCPL), Sibiu, Romania, September 27 -30, 2007, O. Bologa, I. Dumitrache, F.G. Filip (Eds.), ISBN 978-973-739-481-1, vol. 1, p. 11-19. (Invited plenary talk).
     
  • A. Dolgui. Mise en place des systèmes de production "lean", Actes du workshop international : a technically IEEE/SMC co-sponsored workshop (LT2007), S. Hammadi (Ed.), Sousse, Tunisie, 18-20 novembre 2007, p. 241-244. (Invited plenary talk).
     
  • A. Dolgui and D. Ofitserov. Mathematical Methods of Optimization for Computer Aided Manufacturing Systems Management, Proceedings of the Fourth International Conference on Application of Computer Systems (ACS'97), 12-14 November 1997, Szczecin, Poland, p. 104-111. (Invited plenary talk).

     Keynote speeches for invited sessions

  • O. Hazir, X. Delorme, A. Dolgui. A Survey on Cost and Profit Oriented Assembly Line Balancing, Proceedings of the 19th IFAC World Congress, Cape Town, E. Boj, and X. Xia (Eds.), South Africa. August 24-29, 2014, p. 6159-6167. (Keynote talk in an invited session).
     
  • L. Monostori, P. Valckenaers, A. Dolgui, H. Panetto, M. Brdys, B.C. Csáji. Cooperative Control in Production and Logistics, Proceedings of the 19th IFAC World Congress, Cape Town, E. Boj, and X. Xia (Eds.), South Africa. August 24-29, 2014, p. 4247-4265. (Keynote milenstone talk).
     
  • O. Battaïa, X. Delorme, A. Dolgui, F. Grimaud. Integrated Decision Making in Flow Line Balancing, Invited keynote paper for a special session, Proceedings of the IFAC Conference on Manufacturing Modelling, Management and Control (MIM'2013), St Petersburg, Russia, June 19-21, 2013, N. Bakhtadze, A. Dolgui, V. Lototsky (Eds.), Elsevier Science, 2013, IFAC-PapersOnline.net (ISSN 1474-6670), p. 831-838.
     
  • O. Ben Ammar, A. Dolgui, F. Hnaien, A.-M. Ould Louly. Supply planning and inventory control under lead time uncertainty: A review, Invited keynote paper for a special session, Proceedings of the IFAC Conference on Manufacturing Modelling, Management and Control (MIM'2013), St Petersburg, Russia, June 19-21, 2013, N. Bakhtadze, K. Chernyshov, A. Dolgui, V. Lototsky (Eds.), Elsevier Science, 2013, IFAC-PapersOnline.net (ISSN 1474-6670), p. 359-370.
     
  • A. Dolgui, J.M. Proth, Radio Frequency IDentification (RFID) in Supply Chain: Technology, Applications and Concerns, Invited keynote paper for a special Track, Proceedings of the 14th IFAC Symposium on Information Control Problems in Manufacturing (INCOM12), Bucharest, Romania, May 23-25, 2012, T. Borangiu, I. Dumitrache, A. Dolgui, F. Filip (Eds.), Elsevier Science, 2012, IFAC-PapersOnline.net (ISSN 1474-6670), p. 49-56.
     
  • D. Ivanov, A. Dolgui, B. Sokolov. On Applicability of Optimal Control Theory to Adaptive Supply Chain Planning and Scheduling, Invited keynote paper for a special session, Proceedings of the 18th IFAC World Congress, Milano, (Italy), S. Bittanti, A. Cenedese, S. Zampieri (Eds.), August 28 - September 2, 2011, IFAC-PapersOnline.net (ISSN 1474-6670), p. 423-434.
     
  • A. Dolgui, J.-M. Proth. Rfid Technology in Supply Chain Management: State of the Art and Perspectives. Proceedings of the 17th IFAC World Congress, Seoul, Korea, July 6-11, M.J. Chung, P. Misra and H. Shim (Ed.), 2008, Elsevier Science, IFAC-PapersOnLine.net (ISSN 1474-6670), invited keynote paper for a special session, p. 4464-4475.

     Papers in Post-Conference Volumes

  • D. Battini, X. Delorme, A. Dolgui, F. Sgarbossa. Assembly line balancing with ergonomics paradigms - two alternative methods. Proceedings of the 15th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'15), 11 - 13 Mai 2015, Ottawa, Canada, IFAC-PapersOnline.net, Elsevier Science, 2015, (ISSN 1474-6670), p. 620-625. Best Application Paper Award
     
  • M.K.K. Habibi, O. Battaïa, V.-D. Cung, A. Dolgui. Coordination of Collection and Disassembly Planning for End-of-Life Product. Proceedings of the 15th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'15), 11 - 13 Mai 2015, Ottawa, Canada, IFAC-PapersOnline.net, Elsevier Science, 2015, (ISSN 1474-6670), p. 76 - 80.
     
  • D. Ivanov, B. Sokolov, I. Solovyeva, A. Dolgui, F. Jie. Ripple Effect in the Time-Critical Food Supply Chains and Recovery Policies, Proceedings of the 15th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'15), 11 - 13 Mai 2015, Ottawa, Canada, IFAC-PapersOnline.net, Elsevier Science, 2015, (ISSN 1474-6670), p. 1727 - 1732.
     
  • D. Ivanov, A. Dolgui, B. Sokolov. Supply Chain Design With Disruption Considerations: Review of Research Streams on the Ripple Effect in the Supply Chain, Proceedings of the 15th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'15), 11 - 13 Mai 2015, Ottawa, Canada, IFAC-PapersOnline.net, Elsevier Science, 2015, (ISSN 1474-6670), p. 1745 - 1752.
     
  • A. Dolgui, G. Levin and B. Rozin. Optimizing Series-Parallel Execution of Intersecting Blocks of Operations, Proceedings of the 15th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'15), 11 - 13 Mai 2015, Ottawa, Canada, IFAC-PapersOnline.net, Elsevier Science, 2015, (ISSN 1474-6670), p. 1830 - 1834.
     
  • K. Schemeleva, X. Delorme, and A. Dolgui. A memetic algorithm for a stochastic lot-sizing and sequencing problem, Proceedings of the 15th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'15), 11 - 13 Mai 2015, Ottawa, Canada, in IFAC-PapersOnLine (Elsevier, ISSN: 2405-8963), vol. 48, n° 3, 2015, p. 1809-1814.
     
  • M. L. Bentaha, A. Dolgui, O. Battaïa. A bibliographic review of production line design and balancing under uncertainty, Proceedings of the 15th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'15), 11 - 13 Mai 2015, Ottawa, Canada, IFAC-PapersOnline.net, Elsevier Science, 2015, (ISSN 1474-6670), p. 70 - 75.
     
  • A. Dolgui, S. Kovalev, M. Y. Kovalyov, S. Malyutin, A. Soukhal. Minimizing the number of workers for one cycle of a paced production line, Proceedings of the 15th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'15), 11 - 13 Mai 2015, Ottawa, Canada, IFAC-PapersOnline.net, Elsevier Science, 2015, (ISSN 1474-6670), p. 2349 - 2354.
     
  • O. Ben Ammar, H. Marian, and A. Dolgui. Supply planning for multi-levels assembly system under random lead times, Proceedings of the 15th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'15), 11 - 13 Mai 2015, Ottawa, Canada, IFAC-PapersOnline.net, Elsevier Science, 2015, (ISSN 1474-6670), p. 275 - 280.
  • L. Bentaha, O. Battaïa, A. Dolgui. Disassembly line balancing and sequencing under uncertainty, Procedia CIRP, 2014, vol. 15, p. 239-244. (21st CIRP Conference on Life Cycle Engineering, 18-20 June 2014, Trondheim, Norway).
     
  • L. Bentaha, O. Battaïa, A. Dolgui. Lagrangian relaxation for stochastic disassembly line balancing problem, Procedia CIRP, 2014, vol. 17, p. 56-60. (47th CIRP Conference on Manufacturinf Systems, 28-30 April, 2014, Windsor, Ontario, Canada)
     
  • O. Ben Ammar, H. Marian, A. Dolgui and D. Wu. Reducing the research space of possible order release dates for multi-level assembly systems under stochastic lead times, In: Advances in Production Management Systems: Innovative and Knowledge-Based Production Management in a Global-Local World, Part III, B. Grabot, B. Vallespir, S. Gomes, A. Bouras, D. Kiritsis (Eds.), Series: IFIP Advances in Information and Communication Technology, Springer, vol. 440, 2014, ISSN: 1868-4238, p. 368-374. (IFIP WG 5.7 International Conference, APMS 2014, Ajaccio, Corsica, France, September 20-24, 2014).
     
  • M.K.K. Habibi, O. Battaïa, V.-D. Cung and A. Dolgui. Integrated procurement–disassembly problem, In: Advances in Production Management Systems: Innovative and Knowledge-Based Production Management in a Global-Local World, Part II, B. Grabot, B. Vallespir, S. Gomes, A. Bouras, D. Kiritsis (Eds.), Series: IFIP Advances in Information and Communication Technology, Springer, vol. 439, 2014, ISSN: 1868-4238, p. 382-390. (IFIP WG 5.7 International Conference, APMS 2014, Ajaccio, Corsica, France, September 20-24, 2014).
     
  • O. Ben Ammar, A. Dolgui, H. Marian. Genetic algorithm for multi-level assembly systems under stochastic lead times, Proceedings of the 19th IFAC World Congress, Cape Town, E. Boj, and X. Xia (Eds.), South Africa. August 24-29, 2014, p. 778-783.
     
  • M. L. Bentaha, O. Battaïa, A. Dolgui, Disassembly line balancing problem with fixed number of workstations under uncertainty, Proceedings of the 19th IFAC World Congress, Cape Town, E. Boj, and X. Xia (Eds.), South Africa. August 24-29, 2014, p. 3522-3526.
     
  • E. Gafarov, A. Dolgui, F. Grimaud. Two Dedicated Parallel Machines Scheduling Problem with Precedence Relations, In: Operations Research Proceedings 2012 (Selected Papers of the International Annual Conference of the German Operations Research Society -GOR, Leibniz University of Hannover, Germany, September 5-7, 2012). Stefan Helber, Michael Breitner, Daniel Rösch, Cornelia Schön, Johann-Matthias Graf von der Schulenburg, Philipp Sibbertsen, Marc Steinbach, Stefan Weber, Anja Wolter (Eds.), 2014, ISBN: 978-3-319-00794-6 (Print) 978-3-319-00795-3, Springer, p. 403-408.
     
  • F. Makssoud, O. Battaïa, A. Dolgui. An Exact Method for the Assembly Line Re-balancing Problem, In: Advances in Production Management Systems: Sustainable Production and Service Supply Chains (IFIP WG 5.7 International Conference, APMS 2013, State College, PA, USA, September 9-12, 2013), Part I, Vittal Prabhu, Marco Taisch, Dimitris Kiritsis (Eds.), Series: IFIP Advances in Information and Communication Technology, vol. 414, 2013, ISSN: 1868-4238, Springer, p. 159-166.
     
  • M.L. Bentaha, O. Battaïa, A. Dolgui. Chance Constrained Programming Model for Stochastic Profit-Oriented Disassembly Line Balancing in the Presence of Hazardous Parts, In: Advances in Production Management Systems: Sustainable Production and Service Supply Chains (IFIP WG 5.7 International Conference, APMS 2013, State College, PA, USA, September 9-12, 2013), Part I, Vittal Prabhu, Marco Taisch, Dimitris Kiritsis (Eds.), Series: IFIP Advances in Information and Communication Technology, vol. 414, 2013, ISSN: 1868-4238, Springer, p. 103-110.
     
  • M.L. Bentaha, O. Battaïa, and A. Dolgui. A Stochastic Formulation of the Disassembly Line Balancing Problem, In: Advances in Production Management Systems: Competitive Manufacturing for Innovative Products and Services. (IFIP WG 5.7 International Conference, APMS 2012, Rhodes, Greece, September 24-26, 2012, Revised Selected Papers), Part I, C. Emmanouilidis, M.Taisch, and D. Kiritsis (Eds.), Series: IFIP Advances in Information and Communication Technology, vol. 397, ISSN: 1868-4238, Springer, 2013, p. 397-404.
     
  • B. Rozin, G. Levin, A. Dolgui. Optimization of Multi-tool Cutting Modes in Multi-item Batch Manufacturing System, Proceedings of the IFAC Conference on Manufacturing Modelling, Management and Control (MIM'2013), St Petersburg, Russia, June 19-21, 2013, N. Bakhtadze, K. Chernyshov, A. Dolgui, V. Lototsky (Eds.), Elsevier Science, 2013, IFAC-PapersOnline.net (ISSN 1474-6670), p. 766-771.
     
  • A. Dolgui, S. Kovalev, M.Y. Kovalyov, J.Nossack, E. Pesch. A Transfer Line Design Problem with Setup Times and Costs, Proceedings of the IFAC Conference on Manufacturing Modelling, Management and Control (MIM'2013), St Petersburg, Russia, June 19-21, 2013, N. Bakhtadze, K. Chernyshov, A. Dolgui, V. Lototsky (Eds.), Elsevier Science, 2013, IFAC-PapersOnline.net (ISSN 1474-6670), p. 778–783.
     
  • D. Ivanov, B. Sokolov, A. Dolgui, I. Solovyeva. Application of control theoretic tools to Supply chain event management, Proceedings of the IFAC Conference on Manufacturing Modelling, Management and Control (MIM'2013), St Petersburg, Russia, June 19-21, 2013, N. Bakhtadze, K. Chernyshov, A. Dolgui, V. Lototsky (Eds.), Elsevier Science, 2013, IFAC-PapersOnline.net (ISSN 1474-6670), p. 1926– 1931.
     
  • E.R. Gafarov, A. Dolgui, A. Lazarev, F. Werner. A Graphical Approach for Solving Single Machine Scheduling Problems Approximately, Proceedings of the IFAC Conference on Manufacturing Modelling, Management and Control (MIM'2013), St Petersburg, Russia, June 19-21, 2013, N. Bakhtadze, K. Chernyshov, A. Dolgui, V. Lototsky (Eds.), Elsevier Science, 2013, IFAC-PapersOnline.net (ISSN 1474-6670), p. 1341–1345.
     
  • O. Ben Ammar, H. Marian, D. Wu, A. Dolgui. Mathematical Model for Supply Planning of Multi-level Assembly Systems with Stochastic Lead Times, Proceedings of the IFAC Conference on Manufacturing Modelling, Management and Control (MIM'2013), St Petersburg, Russia, June 19-21, 2013, N. Bakhtadze, K. Chernyshov, A. Dolgui, V. Lototsky (Eds.), Elsevier Science, 2013, IFAC-PapersOnline.net (ISSN 1474-6670), p. 389–394.
     
  • O. Battaïa, A. Dolgui, N. Guschinsky, G. Levin. Parallel Machining of Multiple Parts on Rotary Transfer Machines with Turrets, Proceedings of the IFAC Conference on Manufacturing Modelling, Management and Control (MIM'2013), St Petersburg, Russia, June 19-21, 2013, N. Bakhtadze, K. Chernyshov, A. Dolgui, V. Lototsky (Eds.), Elsevier Science, 2013, IFAC-PapersOnline.net (ISSN 1474-6670), p. 1477–1482.
     
  • M.L. Bentaha, O. Battaïa, A. Dolgui. L-shaped Algorithm for Stochastic Disassembly Line Balancing Problem, Proceedings of the IFAC Conference on Manufacturing Modelling, Management and Control (MIM'2013), St Petersburg, Russia, June 19-21, 2013, N. Bakhtadze, K. Chernyshov, A. Dolgui, V. Lototsky (Eds.), Elsevier Science, 2013, IFAC-PapersOnline.net (ISSN 1474-6670), p. 407–411.
     
  • F. Hnaien, M. Afsar, A. Dolgui. Integration of additional purchase cost to reduce the lead time uncertainty for one level assembly system, Proceedings of the IFAC Conference on Manufacturing Modelling, Management and Control (MIM'2013), St Petersburg, Russia, June 19-21, 2013, N. Bakhtadze, K. Chernyshov, A. Dolgui, V. Lototsky (Eds.), Elsevier Science, 2013, IFAC-PapersOnline.net (ISSN 1474-6670), p. 383–388.
     
  • Y. Sotskov, A. Dolgui, A. Zatsiupa. Stable optimal line balances with a fixed set of the working stations, Proceedings of the IFAC Conference on Manufacturing Modelling, Management and Control (MIM'2013), St Petersburg, Russia, June 19-21, 2013, N. Bakhtadze, K. Chernyshov, A. Dolgui, V. Lototsky (Eds.), Elsevier Science, 2013, IFAC-PapersOnline.net (ISSN 1474-6670), p. 1726–1731.
     
  • O. Battaïa, A. Dolgui, N. Guschinsky, G. Levin. Optimal Design of Rotary Transfer Machines with Turrets, Proceedings of the 14th IFAC Symposium on Information Control Problems in Manufacturing (INCOM12), Bucharest, Romania, May 23-25, 2012, T. Borangiu, I. Dumitrache, A. Dolgui, F. Filip (Eds.), Elsevier Science, 2012, IFAC-PapersOnline.net (ISSN 1474-6670), p. 407-412.
     
  • O. Battaïa, A. Dolgui, N. Guschinsky, G. Levin. An Intelligent PLM System for Machining Environment, Proceedings of the 14th IFAC Symposium on Information Control Problems in Manufacturing (INCOM12), Bucharest, Romania, May 23-25, 2012, T. Borangiu, I. Dumitrache, A. Dolgui, F. Filip (Eds.), Elsevier Science, 2012, IFAC-PapersOnline.net (ISSN 1474-6670), p. 1065-1070.
     
  • P. Borisovsky, X. Delorme, A. Dolgui. Balancing Reconfigurable Machining Lines by Means of Set Partitioning Model, Proceedings of the 14th IFAC Symposium on Information Control Problems in Manufacturing (INCOM12), Bucharest, Romania, May 23-25, 2012, T. Borangiu, I. Dumitrache, A. Dolgui, F. Filip (Eds.), Elsevier Science, 2012, IFAC-PapersOnline.net (ISSN 1474-6670), p. 426-431.
     
  • D. Ivanov, B. Sokolov, A. Dolgui. Attainable Sets and Their Possible Applications to Supply Chain Analysis, Proceedings of the 14th IFAC Symposium on Information Control Problems in Manufacturing (INCOM12), Bucharest, Romania, May 23-25, 2012, T. Borangiu, I. Dumitrache, A. Dolgui, F. Filip (Eds.), Elsevier Science, 2012, IFAC-PapersOnline.net (ISSN 1474-6670), p. 578-583.
     
  • K. Schemeleva, A. Dolgui, F. Grimaud, X. Delorme, M.Y. Kovalyov. Production Lot Sizes on a Single Imperfect Machine: FPTAS vs ILP Models, Proceedings of the 14th IFAC Symposium on Information Control Problems in Manufacturing (INCOM12), Bucharest, Romania, May 23-25, 2012, T. Borangiu, I. Dumitrache, A. Dolgui, F. Filip (Eds.), Elsevier Science, 2012, IFAC-PapersOnline.net (ISSN 1474-6670), p. 590-595.
     
  • G. Levin, B. Rozin and A. Dolgui. Optimization of Multi-tool Cutting Modes for Batch Manufacturing in Large Series Machining Environment, Proceedings of the 14th IFAC Symposium on Information Control Problems in Manufacturing (INCOM12), Bucharest, Romania, May 23-25, 2012, T. Borangiu, I. Dumitrache, A. Dolgui, F. Filip (Eds.), Elsevier Science, 2012, IFAC-PapersOnline.net (ISSN 1474-6670), p. 444-448.
     
  • N.N. Bakhtadze, A. Dolgui, V.A. Lototsky, E.M. Maximov. Intelligent Identification Algorithms for Frequency/Power Control in Smart Grid, Proceedings of the 14th IFAC Symposium on Information Control Problems in Manufacturing (INCOM12), Bucharest, Romania, May 23-25, 2012, T. Borangiu, I. Dumitrache, A. Dolgui, F. Filip (Eds.), Elsevier Science, 2012, IFAC-PapersOnline.net (ISSN 1474-6670), p. 940-945.
     
  • F. Makssoud, O. Battaïa, A. Dolgui. A mathematical model for a reconfiguration problem of transfer machining lines, Proceedings of the 14th IFAC Symposium on Information Control Problems in Manufacturing (INCOM12), Bucharest, Romania, May 23-25, 2012, T. Borangiu, I. Dumitrache, A. Dolgui, F. Filip (Eds.), Elsevier Science, 2012, IFAC-PapersOnline.net (ISSN 1474-6670), p. 438-443.
     
  • P. Borisovsky, A. Dolgui, S. Kovalev. A New Model for Equipment Selection and Transfer Line Design Problem, Proceedings of the 18th IFAC World Congress, Milano, (Italy), S. Bittanti, A. Cenedese, S. Zampieri (Eds.), August 28 - September 2, 2011, IFAC-PapersOnline.net (ISSN 1474-6670), p. 3962–3967.
     
  • O. Guschinskaya, E. Gurevsky, A. Eremeev and A. Dolgui. Balancing Mass Production Machining Lines with Genetic Algorithms. In: Advances in Production Management Systems, New Challenges, New Approaches (APMS’2009), Bordeaux, B. Vallespir and T. Alix (Eds.), Advances in Information and Communication Technology, vol. 338, Springer, 2010, p. 65-72.
     
  • M.-A. Louly, A. Dolgui. MRP Offsetting for Assembly Systems with Random Component Delivery Times: A Particular Case. In: Advances in Production Management Systems, New Challenges, New Approaches (APMS’2009), Bordeaux, B. Vallespir and T. Alix (Eds.), Advances in Information and Communication Technology, vol. 338, Springer, 2010, p. 144-151.
     
  • A. Dolgui, J.M. Proth, Stochastic Dynamic Pricing Models of Monopoly Systems, Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing (INCOM09), Moscow, Russia, June 3-5, N. Bakhtadze, A. Dolgui (Eds.), Elsevier Science, 2009, IFAC-PapersOnline.net (ISSN 1474-6670), keynote plenary paper, p. 1452-1463.
     
  • Y. Orlovich, A. Dolgui, G. Finke, V. Gordon and F. Werner, On the Complexity of Dissociation Set Problems in Graphs, Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing (INCOM09), Moscow, Russia, June 3-5, N. Bakhtadze, A. Dolgui (Eds.), Elsevier Science, 2009, IFAC-PapersOnline.net (ISSN 1474-6670), p. 1036-1040.
     
  • A. Dolgui, O. Guschisnkaya, N. Guschinsky, G. Levin, Optimisation of Machining Lines Composed of Unit-built Machines, Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing (INCOM09), Moscow, Russia, June 3-5, N. Bakhtadze, A. Dolgui (Eds.), Elsevier Science, 2009, IFAC-PapersOnline.net (ISSN 1474-6670), p. 1210-1215.
     
  • M.-A. Louly, A. Dolgui, Generalized Newsboy model for MRP parameterization under uncertainties, Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing (INCOM09), Moscow, Russia, June 3-5, N. Bakhtadze, A. Dolgui (Eds.), Elsevier Science, 2009, IFAC-PapersOnline.net (ISSN 1474-6670), p. 838-843.
     
  • A. Dolgui, I. Ihnatsenka, An approach to transfer line balancing via a special set partitioning problem, Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing (INCOM09), Moscow, Russia, June 3-5, N. Bakhtadze, A. Dolgui (Eds.), Elsevier Science, 2009, IFAC-PapersOnline.net (ISSN 1474-6670), p. 754-759.
     
  • V. Gordon, A. Dolgui and V. Strusevich, Due Date Assignment and Scheduling under Special Conditions on Job Processing, Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing (INCOM09), Moscow, Russia, June 3-5, N. Bakhtadze, A. Dolgui (Eds.), Elsevier Science, 2009, IFAC-PapersOnline.net (ISSN 1474-6670), p. 520-525.
     
  • M. Essafi, X. Delorme, A. Dolgui, A GRASP Heuristic for Sequence-Dependent Transfer Line Balancing Problem, Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing (INCOM09), Moscow, Russia, June 3-5, N. Bakhtadze, A. Dolgui (Eds.), Elsevier Science, 2009, IFAC-PapersOnline.net (ISSN 1474-6670), p. 766-771.
     
  • A. Dolgui, A.V. Eremeev, M.Y. Kovalyov, P.M. Kuznetsov, Multi-product lot-sizing and scheduling on unrelated parallel machines to minimize makespan, Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing (INCOM09), Moscow, Russia, June 3-5, N. Bakhtadze, A. Dolgui (Eds.), Elsevier Science, 2009, IFAC-PapersOnline.net (ISSN 1474-6670), p. 832-837.
     
  • A. Dolgui, A. Eremeev, O. Guschinskaya, MIP-based GRASP and genetic algorithm for balancing transfer lines, in Matheuristics: Hybridizing Metaheuristics and Mathematical Programming, Maniezzo, V., Stutzle, T., Voss, S. (eds) Annals of Information Systems, vol. 10, 2010 (ISBN: 978-1-4419-1305-0), Springer, p. 189-208.
     
  • A. Dolgui, M.Y. Kovalyov, and K. Shchamialiova, Lot-Sizing and Sequencing on a Single Imperfect Machine, in H.A. Le Thi, P. Bouvry, and T. Pham Dinh (Eds.): Modelling, Computation and Optimization in Information Systems and Management Sciences (MCO’2008), Communications in Computer and Information Science, vol. 14, 2008, (ISBN 978-3-540-87476-8), Springer-Verlag, 2008, p. 117-125.
     
  • A. Dolgui, M.-A. Louly. An Approach for the MRP Parameterization under Lead Time Uncertainty: Branch and Cut Algorithm. Proceedings of the 17th IFAC World Congress, Seoul, Korea, July 6-11, M.J. Chung, P. Misra and H. Shim (Ed.), 2008, Elsevier Science, IFAC-PapersOnLine.net (ISSN 1474-6670), p. 12849-12854.
     
  • A. Dolgui, A. Pashkevich. Manufacturing Process Planning for Laser Cutting Robotic Systems. Proceedings of the 17th IFAC World Congress, Seoul, Korea, July 6-11, M.J. Chung, P. Misra and H. Shim (Ed.), 2008, Elsevier Science, IFAC-PapersOnLine.net (ISSN 1474-6670), p. 14822-14827.
     
  • O. Guschinskaya, A. Dolgui. A Comparative Evaluation of Exact and Heurististic Methods for Transfer Line Balancing Problem. Information Control Problems In Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006, A. Dolgui, G. Morel, C. Pereira (Eds.), Elsevier Science, 2006, ISBN: 978-0-08-044654-7, vol. 2, p. 395-400.
     
  • A. Dolgui, O. Guschinskaya, N. Guschinsky, G. Levin. Optimization in Design of Unit Head Machines with a Mobil Table. Information Control Problems In Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006, A. Dolgui, G. Morel, C. Pereira (Eds.), Elsevier Science, 2006, ISBN: 978-0-08-044654-7, vol. 2, p. 413- 418.
     
  • S. Belmokhtar, A. Dolgui, X. Delorme, I. Ihnatsenka. Optimizing Modular Machining Line Design Problem. Information Control Problems In Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006, A. Dolgui, G. Morel, C. Pereira (Eds.), Elsevier Science, 2006, ISBN: 978-0-08-044654-7, vol. 2, p. 425-430.
     
  • A. Dolgui, M. Pashkevich. Demand Forecasting for Multiple Slow-moving Items with Low Consumption and Short Requests History. Information Control Problems In Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006, A. Dolgui, G. Morel, C. Pereira (Eds.), Elsevier Science, 2006, ISBN: 978-0-08-044654-7, vol. 3, p. 159- 164.
     
  • S.S. Chauhan, A. Dolgui, M.-A. Louly, J.-M. Proth. A Model for an Assembly System Under Lead Time Uncertainty. Information Control Problems In Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006, A. Dolgui, G. Morel, C. Pereira (Eds.), Elsevier Science, 2006, ISBN: 978-0-08-044654-7, vol. 3, p. 239- 244.
     
  • V. Demidenko, A. Dolgui. Quadratic Assignment Problem: Easily Solvable Cases. Information Control Problems In Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006, A. Dolgui, G. Morel, C. Pereira (Eds.), Elsevier Science, 2006, ISBN: 978-0-08-044654-7, vol. 3, p. 441- 446.
     
  • P. Borisovsky, A. Dolgui, A. Eremeev. Genetic Algorithms for Supply Management Problem with Lower-Bounded Demands. Information Control Problems In Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006, A. Dolgui, G. Morel, C. Pereira (Eds.), Elsevier Science, 2006, ISBN: 978-0-08-044654-7, vol. 3, p. 521- 526.
     
  • A. Dolgui, I. Ignatsenko, S. Belmokhtar. Machining lines with multi-spindle stations: a new optimisation problem. Proc. 21st International Conference on CAD/CAM, Robotics and Factories of the Future (CARs & FOF'2005, Cracow, Poland), The International Journal of INGENIUM, 2005, n° 2, p.153-162, ISSN: 1363-514X, ISBN: 83-7204-454-6.
     
  • A. Dolgui and I. Ihnatsenka, Branch and Bound Algorithm for a Transfer Lines Balancing Problem. Management and Control in Production and Logistics 2004, G. Lefranc (Ed), Elsevier Science, 2005, ISBN: 0-08-044484-9, p. 327-332.
     
  • A. Bratcu, D. Dulman, I. Munteaunu, and A. Dolgui. Optimal Motion Planning of Cooperative Mobile Robots in 2d Environments. Management and Control in Production and Logistics 2004, G. Lefranc (Ed), Elsevier Science, 2005, ISBN: 0-08-044484-9, p. 131-136.
     
  • A. Dolgui, N. Guschinsky, G. Levin, M. Louly, and S. Belmokhtar. Balancing of Transfer Lines with Simultaneously Activated Spindles. Information Control Problems In Manufacturing 2004 (2-Volume Set), P. Kopacek, G. Morel, C. Pereira (Eds.), Elsevier Science, 2005, ISBN: 0-08-044249-8, vol. 1, p. 45-50.
     
  • A. Dolgui, A. Pashkevich, M. Pashkevich. Modeling Demand For Inventory Management Of Slow-Moving Items in Case of Reporting Errors. Information Control Problems In Manufacturing 2004 (2-Volume Set), P. Kopacek, G. Morel, C. Pereira (Eds.), Elsevier Science, 2005, ISBN: 0-08-044249-8, vol. 1, p. 27-32.
     
  • A. Dolgui, N. Guschinsky, and G. Levin, Heuristic Algorithms for Balancing Transfer Lines with Simultaneously Activated Spindles. Manufacturing, Modelling, Management and Control 2004, G. Chryssolouris, D. Mourtzis Elsevier Science, 2005, ISBN: 0-08-044562-4, p. 173-178.
     
  • A. Bratcu, A. Dolgui. Lignes auto-équilibrées : nouveaux concept, analyse et modélisation. Actes de MSR'03, Revue des systèmes, numéro hors série, 2003, p. 195-210. (In French).
     
  • A. Bratcu, A. Dolgui. Synergy, collaboration and self-balancing in production systems-the bucket brigades. In: Intelligent Assembly and Disassembly 2003, T. Borangiu and P. Kopacek (Eds.), Elsevier Science, 2004, ISBN: 0-08-044065-7, p. 61-66.
     
  • A. Dolgui, B. Finel, N. Guschinsky, G. Levin, and F. Vernadat. Some Optimization Approaches for Transfer Lines with Blocks of Parallel Operations. In: Intelligent Manufacturing Systems 2003. A Proceedings volume from the 7th IFAC Symposium, L. Monostori, B. Kadar, G. Morel (Eds.), Elsevier Science, 2003, ISBN: 0-08-044289-7, p. 239-244.
     
  • A.P. Pashkevich, A. Dolgui, K.M. Kazheunikau, Neural Network Technique for Collision Free Trajectory Syntheses for Robotic Manipulators. Intelligent Control Systems and Signal Processing 2003 A.E.B Ruano, M.G. Ruano, P.J. Fleming (Eds.), Elsevier Science, 2003, ISBN: 0-08-044088-6, p. 529-534.
     
  • A. Dolgui, N. Guschinsky, G. Levin. Optimal Design of Transfer Lines with Blocks of Parallel Operations, In: Proceedings of the 15th IFAC World Congress, Camacho, Basanez and De La Puente (Eds.), 21-26 July 2002, Barcelona, Spain, Elsevier Science, 2003, ISBN: 008 044184 X, Volume A. Manufacturing Systems, p. 7-12.
     
  • A.P. Pashkevich, A. Dolgui. Optimal control of robotic manipulator for laser cuting applications, In: Proceedings of the 15th IFAC World Congress, Camacho, Basanez and De La Puente (Eds.), 21-26 July 2002, Barcelona, Spain, Elsevier Science, 2003, ISBN: 008 044184 X, Volume L. Computers for Control, p. 367-372.
     
  • M.A. Ould-Louly, A. Dolgui. A polynomial algorithm for the MPS parametrization under uncertainties, In: Proceedings of the 15th IFAC World Congress, Camacho, Basanez and De La Puente (Eds.), 21-26 July 2002, Barcelona, Spain, Elsevier Science, 2003, ISBN: 008 044184 X, Volume G. Hybrid Systems, p. 19-24.
     
  • B. Rekiek, A. Delchambre, A. Dolgui, A. Bratcu. Assembly line design: a survey. In: Proceedings of the 15th IFAC World Congress, Camacho, Basanez and De La Puente (Eds.), 21-26 July 2002, Barcelona, Spain, Elsevier Science, 2003, ISBN: 008 044184 X, Volume Plen. Plenary, Survey and Milestone volume, p. 155-166.
     
  • M.A. Ould-Louly, A. Dolgui. A dynamic single-stage multi-item inventory control model. In: Large Scale Systems: Theory and Applications 2001. A Proceedings volume from the 9th IFAC/IFORS/IMACS/IFIP Symposium, Bucharest, Romania, 18-20 July 2001, F.G. Filip, I. Dumitrache, S. Iliescu (Eds.), Elsevier Science, 2002, ISBN: 0-08-043691-9, p. 42-48.
     
  • A.P. Pashkevich, A. Dolgui, O. Zaikin, K. Semkin. Integrated design of robotic welding systems. In: Information Control Problems in Manufacturing 2001. A Proceedings volume from the 10th IFAC Symposium, Vienna, Austria, 20-22 September 2001. P. Kopacek, G. Morel, M.B. Zaremba (Eds.), Elsevier Science, 2002, ISBN: 0-08-043246-8, p. 269-275.
     
  • O. Zaikin, A. Dolgui, P. Korytkowski. Modeling and performance optimization of a distributed production system. In: Information Control Problems in Manufacturing 2001. A Proceedings volume from the 10th IFAC Symposium, Vienna, Austria, 20-22 September 2001. P. Kopacek, G. Morel, M.B. Zaremba (Eds.), Elsevier Science, 2002, ISBN: 0-08-043246-8, p. 105-110.
     
  • A. Dolgui. Editorial of the Special Session: "Automated Production Line Design". In: Management and Control of Production and Logistics: A Proceedings Volume of the IFAC Conference, 2001, Elsevier Science, (ISBN: 0-08-043621 8), vol. 3, p. 971-973.
     
  • A. Dolgui and M.-A. Ould Louly. An Inventory Model for MRP Parameterization. In: Management and Control of Production and Logistics: A Proceedings Volume of the IFAC Conference, Z. Binder (Ed), 2001, Elsevier Science, vol. 3, ISBN: 0-08-043621 8, p. 1001-1006.
     
  • A. Dolgui, N. Guschinsky and G. Levin. Decomposition Methods to Optimize Transfer Line with Parallel and Sequential Machining. In: Management and Control of Production and Logistics: A Proceedings Volume of the IFAC Conference, Z. Binder (Ed), 2001, Elsevier Science, vol. 3, ISBN: 0-08-043621 8, p. 983-988.
     
  • Y. Sotskov, A. Dolgui and G. Andreev. Unit-Time Job-Shop Scheduling by Algorithm for Mixed Graph Coloring. In: Management and Control of Production and Logistics: A Proceedings Volume of the IFAC Conference, Z. Binder (Ed), 2001, Elsevier Science, vol. 1, ISBN: 0-08-043621 8, p.681-686.
     
  • A. Dolgui, N. Guschinsky, G. Levin and Y. Harrath. Optimal Design of A Class of Transfer Lines with Parallel Operations. In: Manufacturing, Modeling, Management and Control: A Proceedings Volume of the IFAC Symposium, P. Groumpos and A. Tzes (Eds), Elsevier Science, 2000, p. 36-41.
     
  • A. Dolgui and M.-A. Ould Louly. Optimization of Supply chain under Uncertainty. In: Manufacturing, Modeling, Management and Control: A Proceedings Volume of the IFAC Symposium, P. Groumpos and A. Tzes (Eds), Elsevier Science, 2000, p. 291-296.
     
  • A. Dolgui, M. C. Portmann and J. M. Proth. A Control Model of the Assembly Manufacturing. In: System Modeling and Optimization. Proceedings of the 17th IFIP TC7 Conference, J. Dolezal, J. Fidler (Eds.), Chapman&Hall, 1996, p. 519-526.
     
  • V. Balaguin, A. Dolgui, D. Ofitserov, M. Revotuk, V. Starych and A. Smirnov. Zur Simulation flexibler Fertigungssysteme (in English: On the Simulation of Flexible Manufacturing Systems). In: Simulationstechnik. Proceedings 4th Symposium Simulationstechnik (ASIM-4), September 7-9, 1987, Zurich. Springer-Verlag, 1987, p. 548-556.

     Papers in Conference Preprints/Proceedings

  • C. Serrano, X. Delorme, A. Dolgui. Distribution and operation planning at a cross-dock platform: a case of study at Renault, Proceedings of the 4th IEEE International Conference on Advanced Logistics and Transport (ICALT), Valenciennes, France, May 20- 22, 2015, IEEE, p. 193-198.
     
  • M. K. Habibi, O. Battaïa, V.-D. Cung, A. Dolgui, Dealing with the collection and the disassembly planning for simple end-of-life product. Actes des Journées Doctorales / Nationales MACS, 18-19 Juin 2015, Bourges, France, 5 pages (flash USB).
     
  • A. Chibani, X. Delorme, A. Dolgui, H. Pierreval, Approvisionnement d'une chaîne logistique agile : une approche d'optimisation dynamique, Actes de la Conference Internationale sur la Modélisation, l'Optimisation et la Simulation : de l'Economie Linéaire à l'Economie Circulaire (MOSIM 2014), Nancy, 5-7 novembre, 2014, 10 pages. (CD-ROM).
     
  • F. Hnaien, A. Dolgui. An efficient exact method for multilevel serial systems under uncertaities of lead times and fixed demand. Proceedings of the Joint Symposium "Computers and Industrial Engineering" and "Intelligent Manufacturing and Service Systems" (CIE44 & IMSS'14), 14-16 October 2014, Istanbul, Turkey, p. 2182-2194.
     
  • O. Battaïa, A. Dolgui, N. Guschinsky. Heuristics for process plan design for machining of groups of parts at reconfigurable unit-head machines, Proceedings of the 6th International Conference "Tanaev's Readings", March27-28, 2014, Minsk, National Academy of Sciences of Belarus, ISBN 978-985-6744-82-5, p. 9-13 (in Russian)
     
  • A. Chibani, X. Delorme, A. Dolgui, and H. Pierreval. Dealing with Variations for a Supplier Selection Problem in a Flexible Supply Chain A Dynamic Optimization Approach, Proceedings of the 3rd International Conference on Operations Research and Enterprise Systems, Angers, Loire Valley, France, 6 - 8 March, 2014, p. 322-327.
     
  • O. Battaïa, X. Delorme, A. Dolgui, J. Hagemann, A. Horlemann, S. Kovalev, S. Malyutin. Workforce Minimization for a Mixed-Model Assembly Line, Preprints of the Eighteenth International Working Seminar on Production Economics, R.W. Grubbström, H.H. Hinterhuber (Eds.), Innsbruck, Austria, February 24-28, 2014, vol. 3, p. 51-63.
     
  • O. Ben-Ammar, H. Marian, A. Dolgui. Optimization for supply planning in multi-level assembly systems with stochastic lead-times, International Conference on Industrial Engineering and Systems Management (IESM'2013) - October 28-30, 2013 - Rabat, Morocco, CD-ROM, 10 pages.
     
  • F. Makssoud, O. Battaïa, A. Dolgui. An exact approach to improve the reusability of serial machining lines, International Conference on Industrial Engineering and Systems Management (IESM'2013) - October 28-30, 2013 - Rabat, Morocco, CD-ROM, 10 pages.
     
  • K. Schemeleva, X. Delorme, A. Dolgui, F. Grimaud. Experimental study of a decomposition approach for a sequencing and lot-sizing under uncertainties, International Conference on Industrial Engineering and Systems Management (IESM'2013) - October 28-30, 2013 - Rabat, Morocco, CD-ROM, 10 pages.
     
  • A. Dolgui, G.M. Levin, B.M. Rozin. Optimization of execution rate for intersected sets of serie-parralel tasks, International Congress on Computer Science: Information Systems and Technologies (CSIST'2013), November 4-7, 2013, Belarusian State University, Minsk, Belarus, 5 pages.
     
  • A. Dolgui, G.M. Levin, B.M. Rozin, I.V. Kosobudski. A parallel algorithm for optimization of execution times of intersected sets of serie-parralel tasks, International Congress on Computer Science: Information Systems and Technologies (CSIST'2013), November 4-7, 2013, Belarusian State University, Minsk, Belarus, 5 pages.
     
  • L. Bentaha, O. Battaïa, A. Dolgui. A Decomposition Method for Stochastic Partial Disassembly Line Balancing with Profit Maximization, Proceedings of 9th IEEE Conference on Automation Science and Engineering, August 17 to 21, 2013, in Madison, WI, USA, 6 pages.
     
  • E. Gafarov, A. Dolgui, A. Lazarev, F. Werner. Solving an Investment Optimization Problem by an Improved Graphical Approach, Proceeding of the 22nd International Conference on Production Research, July 28 - August 3, Brazil, 2013, 6 pages.
     
  • A. Zatsiupa, Yu.N. Sotskov, A. Dolgui. Enumeration of the stable optimal line balances for a simple assembly line balancing problem with fixed cycle time, Proceeding of the 22nd International Conference on Production Research, July 28 - August 3, Brazil, 2013, 6 pages.
     
  • L. Bentaha, O. Battaïa, A. Dolgui. A Cone programming approach for stochastic disassembly line balancing in the presence of hazardous parts, Proceeding of the 22nd International Conference on Production Research, July 28 - August 3, Brazil, 2013, 6 pages.
     
  • E.R. Gafarov, A. Lazarev and A. Dolgui. Solution algorithms for the two-station single track railway scheduling problem, Proceedings of the 6th Multidisiplinary International Scheduling Conference: Theory and Applications (MISTA 2013), Ghent, Belgium, 27-29 August 2013, Graham Kendall, Greet Vanden Berghe, Barry McCollum (Eds.), p. 636-640.
     
  • E.R. Gafarov, A. Dolgui, A.A. Lazarev, F. Werner. A Graphical Algorithm for Solving an Investment Optimization Problem, Proceedings of the 6th Multidisiplinary International Scheduling Conference: Theory and Applications (MISTA 2013), Ghent, Belgium, 27-29 August 2013, Graham Kendall, Greet Vanden Berghe, Barry McCollum (Eds.), p. 290–299.
     
  • N. Guschinsky, G. Levin, A. Dolgui. Decomposition methods for synthesis of manufacturing processes for machining at flow lines composed of rotary transfer machines, Proceedings of 4th International Conference on Supercomputers and their Applications (SSA'12), October 23-25, 2012, Minsk, Belarus, p. 172-176 (In Russian).
     
  • A. Dolgui, A. Eremeev, On complexity of optimal recombination in genetic algorithms for one-dinansional bin paking problems, Proceedings of the VIII-th International conference on Dynamics of Systems, Mechanismes and Machines, November 13-15, 2012, Publishing House of Omsk State University, Russia, 2012, vol. 3, p. 25-27. (In Russian).
     
  • P. Borisovsky, X. Delorme, A. Dolgui. An exact algorithm for balancing of a production line with parallel machines, Proceedings of the VIII-th International conference on Dynamics of Systems, Mechanismes and Machines, November 13-15, 2012, Publishing House of Omsk State University, Russia, 2012, vol. 3, p. 13-16. (In Russian).
     
  • E.R. Gafarov, A. Dolgui, A.A. Lazarev. Some Complexity Results for the Simple Assembly Line Balancing Problem, Proceedings of the 3rd International Conference Optimization and Applications (OPTIMA'2012), Costa da Caparica, Portugal, September 23-30, Edited by V.I. Zubov, Moscow, Russian Academy of Sciences, 2012, ISBN 978–5–91601–051–0, p. 81-85.
     
  • E.R. Gafarov, A. Dolgui, F. Grimaud. Two Dedicated Parallel Machines Scheduling Problem with Precedence Relations, International Annual Conference of the German Operations Research Society (OR'2012), September 4–7, 2012, 6 pages.
     
  • F. Maksoud, O. Battaïa, A. Dolgui. An application of goal programming technique for reconfiguration of transfer lines, Proceedings of the 9th International Conference on Informatics in Control, Automation and Robotics (ICINCO'2012), Rome, Italy, July 28-31, 2012, (CD-ROM), p. 539-542.
     
  • E. Gafarov, A. Dolgui, A. Lazarev, Notes on Complexity of the Simple Assembly Line Balancing Problem, Proceedings of the Conference UKI'2012, Institute of Control Problems, Russian Academy of Sciences, Moscow, April 2012, 8 pages.
     
  • O. Ben Ammar, H. Marian, A. Dolgui. Configuration d'un système d'assemblage multi-niveau sous incertitudes des délais d'approvisionnement, Preprints de la conférence internationale Modélisation, Optimisation et Simulation (MOSIM'12), Bordeaux, 6-8 juin 2012, 10 pages, (CD-ROM).
     
  • S. Kovalev, X. Delorme, A. Dolgui. Minimisation du coût de mises en service pour des lignes d'usinage multi-produits, Preprints de la conférence internationale Modélisation, Optimisation et Simulation (MOSIM'12), Bordeaux, 6-8 juin 2012, 6 pages (CD-ROM).
     
  • O. Hazir and A. Dolgui. Robust U-Type Assembly Line Balancing Problem: A Decomposition Based Approximate Solution Algorithm, Preprints of the 17th International Working Seminar on Production Economics, Innsbruck, February 20-24, 2012, p. 225-230.
     
  • X. Delorme, A. Dolgui and S. Kovalev. Minimizing Setup Cost for Multi-Part Production Lines, Proceedings of the 41st International Conference on Computers & Industrial Engineering, Los Angeles, October 23-25, 2011, p. 566–571.
     
  • P. Borisovsky, X. Delorme, A. Dolgui. Genetic Algorithm for Balancing Reconfigurable Machining Lines, Proceedings of the 41st International Conference on Computers & Industrial Engineering, Los Angeles, October 23-25, 2011, p. 116–121.
     
  • M. Essafi, X. Delorme, A. Dolgui. Conception d’une ligne d’usinage reconfigurable : étude de cas, Actes du 9e Congrès International de Génie Industriel, 12-14 octobre 2011, St-Sauveur, Québec, Canada, 8 pages, actes sur le site : https://symposia.cirrelt.ca/CIGI2011/fr/Programme
     
  • O. Hazir, A. Dolgui, An Exact Solution Algorithm for Balancing Simple U-Type Assembly, Proceedings of the 21st International Conference on Production Research (ICPR-21), D. Spath, R. Ilg, T. Krause (Eds.), July 31-August 4, 2011, Stuttgart, Germany, CD-ROM, section Assembly, 4 pages.
     
  • F. Hnaien, A. Dolgui. The one-period inventory control for one-level assembly systems under uncertainty, Proceedings of the 21st International Conference on Production Research (ICPR-21), D. Spath, R. Ilg, T. Krause (Eds.), July 31-August 4, 2011, Stuttgart, Germany, CD-ROM, section Assembly, 6 pages.
     
  • O. Hazir, A. Dolgui. Simple assembly line balancing under uncertainty: a robust approach, Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), Metz, May 25-27, 2011, France, USB flash, 8 pages.
     
  • E. Gurevsky, O. Guschinskaya, A. Dolgui, Stability analysis of one balancing problem of simple assembly lines with parallel workplaces, Proceedings of the IFIP conference on Advances in Production Management Systems (APMS'2010), October 11-13, 2010, Cernobbio, Como, Italy, USB flash, 8 pages.
     
  • M. Essafi, X. Delorme, A. Dolgui, New Trends and challenges in Transfer Line Balancing, Proceedings of the IFIP conference on Advances in Production Management Systems (APMS'2010), Cernobbio, Como, Italy, USB flash, 7 pages.
     
  • E. Gurevsky, O. Guschinskaya, A. Dolgui, Post-optimal analysis for a design problem of machining lines.Preprints of the 5th IFAC conference on Management and Control of Production and Logistics (MCPL'2010), September 8-10, 2010, Coimbra, Portugal, USB flash, 5 pages.
     
  • A. Dolgui, K. Shchamialiova, F. Grimaud, Solution methods for a multi-product lot-sizing and sequencing problem in a flow-shop. Preprints of the 12th IFAC symposium on Large Scale Systems: Theory and Applications, July 12-14, 2010, Ecole Centrale de Lille, Villeneuve d’Ascq, CD-ROM, 6 pages.
     
  • K. Shchamialiova, A. Dolgui, F. Grimaud, Une approche génétique pour un problème de lotissement et de séquencement sous aléas, Actes de 8e Conférence Internationale Modélisation et Simulation (MOSIM'10), Hammamet, Tunisie, les 10-12 mai 2010, Clé USB, 8 pages.
     
  • F. Hnaien, A. Dolgui, Le paramétrage du MRP sous incertitudes de délais d'approvisionnements et demande : le cas de système d'assemblage à un niveau, Actes de 8e Conférence Internationale Modélisation et Simulation (MOSIM'10), Hammamet, Tunisie, les 10-12 mai 2010, Clé USB, 8 pages.
     
  • E. Gurevsky, O. Guschinskaya, A. Dolgui, Analyse de sensibilité du problème de l'équilibrage des lignes d'usinage : perturbations des temps opératoires, Actes de 8e Conférence Internationale Modélisation et Simulation (MOSIM'10), Hammamet, Tunisie, les 10-12 mai 2010, Clé USB, 8 pages.
     
  • E. Gurevsky, O. Guschinskaya, A. Dolgui, Assembly line balancing problems under uncertainties, Proceedings of the 25th Mini-EURO Conference on Uncertainty and Robustness in Planning and Decision Making (URPDM2010), C.H. Antunes, D.R. Insua, L.C. Dias (Eds.), Coimbra – Portugal, 15-17 April 2010, CD-ROM, ISBN: 978-989-95055-3-7, 8 pages.
     
  • J. Blazewicz, A. Dolgui, V. Gordon and Y. Orlovich, On the independent set problem in triangle graphs, Booklet of abstracts of the 12th International Conference devoted to Project Management and Scheduling (PMS’2010), April 26-28, 2010, Tours - Loire Valley, France, p. 119–122.
     
  • A. Dolgui, S. Kovalev. Reducing transfer balancing problem with known blocks and parallel activation mode to a set partitioning problem, Tanaev’s Readings. Proceedings of the 4th International Conference, Y. Sotskov (Ed.), Minsk, March 28-29, Academy of Sciences, (ISBN 978-985-6744-61-0), 2010, p. 159–163.
     
  • N. Guschinsky, G. Levin, A. Dolgui, Methods of process design for machining lines composed of multi-positional dedicated machines, Tanaev’s Readings. Proceedings of the 4th International Conference, Y. Sotskov (Ed.), Minsk, March 28-29, Academy of Sciences, (ISBN 978-985-6744-61-0), 2010, p. 40–44. (in Russian).
     
  • K. Shchamialiova, A. Dolgui, A Lot-sizing and Sequencing Problem Under Uncertainties: Comparison of Solution Approach, Pre-prints of the 16th International Working Seminar on Production Economics (IWSPE’2010), March 1-5, 2010, Innsbruck, Austria, Vol. 1, p. 469-480.
     
  • M.-A. Louly, A. Dolgui, An Inventory Model for Planned Lead Times Calculations under Lead Time Uncertainties and Service Level Constraint, Pre-prints of the 16th International Working Seminar on Production Economics (IWSPE’2010), March 1-5, 2010, Innsbruck, Austria, Vol. 4, p. 119-126.
     
  • E. Gurevsky, O. Guschinskaya, A. Dolgui, Qualitative stability analysis of an optimal balance for an assembly line with fixed stations number. Proceedings of the 14th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA'2009). Palma de Mallorca (Spain), September 22-26, 2009, CD-ROM, 6 pages.
     
  • M.-A. Louly, A. Dolgui, MRP offsetting for assembly systems under random component delivery times, Proceedings of the International Conference on Advances in Production Management Systems (APMS'2009), Bordeaux, France, September 19-23, 2009, USB flash, 8 pages.
     
  • O. Guschinskaya, E. Gurevsky, A. Eremeev, A. Dolgui, Balancing mass production machining lines with genetic algorithms, Proceedings of the International Conference on Advances in Production Management Systems (APMS'2009), Bordeaux, France, September 19-23, 2009, USB flash, 8 pages.
     
  • K. Shchamialiova, A. Dolgui, F. Grimaud, A Genetic Algorithm Based Approach for Multi-Product Lot-Sizing and Sequencing Problem Under Uncertainties, Proceedings of the 20th International Conference on Production Research (ICPR20), 2-6 August, 2009, Shanghai, China, CD-ROM, 6 pages.
     
  • M. Essafi, X. Delorme, A. Dolgui, Balancing Lines with CNC Machines: Experimental Study of a New Heuristic, Proceedings of the 20th International Conference on Production Research (ICPR20), 2-6 August, 2009, Shanghai, China, CD-ROM, 6 pages.
     
  • F. Hnaien, A. Dolgui, M.-A. Ould Louly, MRP Parameterization Under Lead Times Uncertainties: Case of Multilevel Serial Production Systems, Proceedings of the 39th International Conference on Computers & Industrial Engineering (CIE39), Troyes, France, July 6-8, 2009, IEEE, 2009, p. 875-880.
     
  • E. Gurevsky, O. Guschinskaya, A. Eremeev, A. Dolgui, Balancing machining transfer lines using genetic algorithms, Proceedings of the 39th International Conference on Computers & Industrial Engineering (CIE39), Troyes, France, July 6-8, 2009, IEEE, 2009, p. 1850-1855.
     
  • O. Guschinskaya, E. Gurevsky, A. Dolgui, A. Eremeev, Métaheuristiques pour la conception en avant-projet des lignes d’usinage, Actes du 8ème Congrès International de Génie Industriel, ENI Tarbes, Bagnères de Bigorre, les 10, 11 et 12 juin 2009, CD-ROM, 8 pages.
     
  • M. Essafi, X. Delorme, A. Dolgui. Balancing lines with CNC machines: a multi-start heuristic, Proceedings of the 42th CIRP Conference on Manufacturing Systems, June 3-5, Grenoble, France, CD-ROM, 2009, 6 pages.
     
  • E. Gurevsky, O. Guschinskaya, A. Eremeev, A. Dolgui, Metaheuristic methods for balancing machining transfer lines, Proceedings of the 42th CIRP Conference on Manufacturing Systems, June 3-5, Grenoble, France, CD-ROM, 2009, 7 pages.
     
  • M.A. Louly, A. Dolgui, Optimal Parameters for MRP with POQ Policy, Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2009), Montreal, Canada, May 13-15, 2009, CD-ROM, 9 pages.
     
  • F. Hnaien, X. Delorme, A. Dolgui. Supply planning for two-level assembly systems with stochastic component delivery times: trade-off between holding cost and service level, Workshop Metaheuristics for Logistics and Vehicle Routing, October 23-24, 2008, University of Technology of Troyes, France, 7 pages.
    http://webhost.ua.ac.be/eume/workshops/eume08/programme.php
     
  • A. Dolgui, N. Guschinsky, and G. Levin. Integrated Approach for Design of Machining Systems, Preprints of the 9th IFAC Workshop on Intelligent Manufacturing Systems (IMS’08), C. Pereira, O. Zaikin, Z. Banaszak (Eds.), October 9-10, 2008, Szczecin, Poland, p. 405-410.
     
  • L. Makdessian, F. Yalaoui, A. Dolgui. A Multi-Objective Approach for Transfer Line Optimization, Preprints of the 9th IFAC Workshop on Intelligent Manufacturing Systems (IMS’08), C. Pereira, O. Zaikin, Z. Banaszak (Eds.), October 9-10, 2008, Szczecin, Poland, p. 281-286.
     
  • F. Hnaien, X. Delorme, A. Dolgui. A Genetic Algorithm for Replenishement of Two-Level Assembly Systems, Preprints of the 9th IFAC Workshop on Intelligent Manufacturing Systems (IMS'08), C. Pereira, O. Zaikin, Z. Banaszak (Eds.), October 9-10, 2008, Szczecin, Poland, p. 213-218.
     
  • A. Dolgui, O. Guschinskaya, A. Eremeev. MIP-Based Greedy Randomized Adaptive Search Procedure for Balancing Transfer Lines, Proceedings of XIV Baikal International School-seminar “Optimization Methods and their Applications”, Vol. 4. Applications of optimization methods, July, 2 – 8, 2008, Baikal. Irkutsk: 2008, ISBN 978-5-93908-052-1, p. 174-184.
     
  • K. Benaissa, D. Diep, A. Dolgui. Control the chaos in agent based manufacturing systems, Proceedings of the 13th IEEE International Conference on Emerging Technologies and Factory Automation, Hamburg, Germany, September 15-18, 2008. IEEE Press, p. 1252-1259.
     
  • A. Dolgui, M.-A. Ould Louly, F. Hnaien. Planned lead times for one-level assembly system with service level constraint, Proceedings of the 13th IEEE International Conference on Emerging Technologies and Factory Automation, Hamburg, Germany, September 15-18, 2008. IEEE Press, p. 1504-1511.
     
  • K. Benaissa, D. Diep, A. Dolgui, Emergent chaotic behaviour in agent based manufacturing systems, Proceedings of the 17th IEEE International Workshop on Enabling Technologies: Infrastructures for Collaborative Enterprises, Rome, Italy, June 23-25, 2008, IEEE Press, p. 24–25.
     
  • O. Guschinskaya, A. Dolgui. Equilibrage des lignes d'usinage à boîtiers multi-broches avec la méthode GRASP, Actes de la 7e conférence internationale francophone de modélisation et simulation (MOSIM'08), Paris, France, 31 mars – 2 avril 2008, Lavoisier, 2008, vol.2, p. 1121-1130.
     
  • F. Hnaien, H. Marian, A. Dolgui. Détermination des dates d'approvisionnement optimales pour un système d'assemblage à deux niveaux, Actes de la 7e conférence internationale francophone de modélisation et simulation (MOSIM'08), Paris, France, 31 mars – 2 avril 2008, Lavoisier, 2008, vol. 1, p. 572-581.
     
  • M.-A. Louly, A. Dolgui. An optimization approach for time phasing in MRP systems, Preprints of the Fifteenth International Working Seminar on Production Economics, March 3-7, Innsbruck, Austria, 2008, vol. 3, p. 273-280.
     
  • M. Essafi, X. Delorme, A. Dolgui, O. Guschisnkaya. Balancing Machining Lines with Paralleling of Stations and Sequence-dependent Setup Times, Proceedings of the 37th International Conference on Computers & Industrial Engineering, edited by M. H. Elwany, A. B. Eltawil, October 20-23, 2007, Alexandria – Egypt, CD-ROM, p. 2012-2023.
     
  • F. Hnaien, A. Dolgui, H. Marian, M.-A. Ould Louly. Supply Planning for Multilevel Production Systems with Stochastic Lead Times, Proceedings of the 37th International Conference on Computers & Industrial Engineering, edited by M. H. Elwany, A. B. Eltawil, October 20-23, 2007, Alexandria – Egypt, CD-ROM, p. 825-834.
     
  • O. Guschinskaya, A. Dolgui, M. Ben Khelifa. Un outil d'aide à la décision pour la conception des systèmes d'usinage, Actes de la 5ème conférence Internationale « Conception et Production Intégrées » (CPI 2007), 22-24 octobre 2007, Rabat, Maroc, CD-ROM, 16 pages.
     
  • O. Guschinskaya, A. Dolgui. Balancing transfer lines with multi-spindles machines using GRASP, Preprints of the 4th IFAC conference on Management and Control in Manufacturing and Logistics (MCPL), Sibiu, Romania, September 27 -30, 2007, O. Bologa, I. Dumitrache, F.G. Filip (Eds.), ISBN 978-973-739-481-1, vol. 2, p. 511-516.
     
  • M. Essafi, X. Delorme, A. Dolgui. Mise en place des systèmes de production “lean”, Actes du workshop international : a technically IEEE/SMC co-sponsored workshop (LT2007), S. Hammadi (Ed.), Sousse, Tunisie, 18-20 novembre 2007, p. 349-354.
     
  • O. Guschinskaya, A. Dolgui. Survey on flow line balancing problems, Proceedings of the 9th International Conference on the Modern Information Technology in the Innovation Processes of the Industrial Enterprises, M. Rapaccini and F. Visintin (Eds.), 6-7 September 2007, Florence, Italy, ISBN 978 - 88- 7544-107-4, p. 269-274.
     
  • O. Guschinskaya, A. Dolgui. Heuristic Methods for a Transfer Line Balancing Problem, Proceedings of the 19th International Conference on Production Research (ICPR-19), Jose A. Ceroni (Ed.), July 29 - August 2, 2007, Valparaiso, Chile, ISBN 978-956-310-751-7, CD-ROM, 6 pages.
     
  • F. Hnaien, A. Dolgui, M.-A. Ould Louly, H. Marian. Optimal Order Release for Multilevel Assembly Systems Under Random Lead Times and Constant Demand, Proceedings of the 19th International Conference on Production Research (ICPR-19), Jose A. Ceroni (Ed.), July 29 - August 2, 2007, Valparaiso, Chile, ISBN 978-956-310-751-7, 7 pages.
     
  • F. Hnaien, H. Marian, A. Dolgui, et M.-A. Ould Louly. Planification des réapprovisionnements d'un système d'assemblage à deux niveaux soumis aux aléas des délais d'approvisionnement, Actes du 7e congrès de Génie industriel, Trois-Rivières, Canada, 5-7 juin 2007, CD-ROM, 8 pages.
     
  • A. Dolgui, N. Guschinsky, G. Levin. An Improved Mixed Integer Programming Model for a Transfer Line Balancing Problem, Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2007), May 30- June 2, 2007, Beijing, China, S. Yang, G. Chen, A. Thomas, A. Artiba, Z. Xu (Eds.), Tsinghua University Press, ISBN: 978-7-302-15312-2 (hard copy of abstracts), p. 50; ISBN: 978-7-89486-439-0 (full paper on CD-ROM), 10 pages.
     
  • O. Guschinskaya, A. Dolgui, N. Guschinsky, G. Levin. New Reduction Methods For The Transfer Line Balancing Problem, Preprints of IMS' 2007: IFAC Workshop On Intelligent Manufacturing Systems, May 23-25 2007, Alicante, Spain, F.A. Andelas, C. Pereira, F. Torres (Eds.), p. 75-80.
     
  • O. Guschinskaya, A. Dolgui, Conception De Machines-Outils Avec Table Mobile, Actes du 10ème Colloque Nationale AIP-Primeca « Les innnovations en conception de produits et systèmes de production », les 18-20 avril 2007, La Plagne, France, CD-ROM, 12 pages.
     
  • F. Hnaien, A. Dolgui, L. Boukir and M.-A. Ould Louly. Optimal Release Dates in Multiperiod and Multilevel Supply Chain with Random Lead Times. Proceedings of the International Mediterranean Modelling Multiconference (I3M'2006), October 4-6, 2006, Barcelona, Spain, LogiSim, ISBN: 84-690-0726-2, p. 75-82.
     
  • F. Hnaien, A. Dolgui and M.-A. Ould Louly. Supply Planning in Multilevel Assembly Systems Under Lead Times uncertainties. Proceedings of the 2006 International Conference on Service Systems and Service Management (ICSSSM'06), October 25-27, 2006, Troyes, France, IEEE Catalog Number: 06EX1406C, ISBN: 1-4244-0451-7, p. 1014-1019.
     
  • L. Capacho, R. Pastor, O. Guschinskaya, A. Dolgui. Heuristic Methods to Solve the Alternative Subgraphs Assembly Line Balancing Problem. Proceedings of the 2006 IEEE Conference on Automation Science and Engineering, October 8-10, 2006, Shangai Pudong, China, IEEE Catalog Number: 06EX1338C, ISBN: 1-4244-0311-1, p. 513-518.
     
  • L. Capacho , O. Guschinskaya, A. Dolgui, R. Pastor. A Comparative Analysis of Heuristic Methods for the Alternative Subgraphs Assembly Line Balancing Problem. Anales del XIII Congreso Latino-Iberoamericano de Investigación Operativa (CLAIO), ISBN: 9974-7699-9-X, November 27-30, 2006, Montevideo, Uruguay.
     
  • F. Hnaien, A. Dolgui. A Supply Planning Model for Multilevel Assembly Systems Under Random Lead Times. Proceedings of the 11th IEEE International Conference on Emerging Technologies and Factory Automation, September 20-22, 2006, Prague, Czech Republic, IEEE Catalog Number: 06TH8897C, ISBN: 1-4244-0681-1, p. 1348-1351.
     
  • L. Capacho, O. Guschinskaya, A. Dolgui, R. Pastor. An Evaluation Study of Approximate Methods for a Line Balancing Problem with Assembly Alternatives. Proceedings of the 8th International Conference on the Modern Information Technology in the Industrial Enterprises, September 11-12, 2006, Budapest, Hungary, ISBN: 963 86568 57, p. 199-204.
     
  • A. Dolgui, O. Guschinskaya, N. Guschinsky, G. Levin. "Machine Tools Engineering": Integrated Decision Support System For The Logical Layout Design Of Unit Head Machines. Proceedings of the International Conference on Global Manufacturing and Innovation - July 27-29, 2006, Coimbatore, India (CD-ROM), 9 pages.
     
  • F. Hnaien, A. Dolgui, M-A. Ould Louly. The Optimal Release Dates in Multilevel Assembly Systems with Random Lead Times. Proceedings of the 36th International Conference on Computers and Industrial Engineering, June 21-23, 2006, National Tsing Hua University, Taiwan, p. 1274-1284.
     
  • P. Korytkowski, A. Dolgui, O. Zaikin Zalozenie eksperymentu symulacyjnego w srodowisku laboratorium wirtualnego. Badania operacyjne i systemowe 2006, analiza systemowa w globalnej gospodarce opartej na wiedzy: e-wyzwania, E. Urbanczyk, A. Straszak, J.W. Owsinski (Eds.), ISBN: 83-60434-21-2, EXIT, Warszawa, 2006, p. 383-390. (in Polish).
     
  • M.A. Louly, A. Dolgui. A new supply planning model for assembly systems, Proceedings of the International Conference on Information Systems, Logistics and Supply Chain, May 14-17, 2006, Lyon, France, Vol.2, p. 1034-1043.
     
  • A. Dolgui, I. Ihnatsenka. Lignes d'usinage avec têtes multi-broches : un nouveau problème d'optimisation. Actes de la 6e Conference Francophone de Modélisation et Simulation, 3,4 et 5 avril 2006, Rabat, Maroc, M. Gourgand, F. Riane (Eds.), Lavoisier, Editions Tec&Doc, vol. 2, p. 1250-1259.
     
  • A. Dolgui, M. Pashkevich. Demand forecasting for multiple slow-moving items with short requests history in case of changeable demand variance. Preprints of the Fourteenth International Working Seminar on Production Economics, Innsbruck, Austria, February 20-24, 2006, vol. 2, p. 143-152.
     
  • A. Dolgui, I. Ihnatsenka. Mixed model for transfer lines with multi-spindles stations: an optimization algorithm. Proceedings of the 10th IEEE International Conference on Emerging Technologies and Factory Automation, September 19-22, 2005, Lucia Lo Bello and Thilo Sauter (Ed.), IEEE, 2005, vol. 1, p. 467-474.
     
  • A. Bratcu, A. Dolgui, S. Belmokhtar. Reconfigurable Transfer Lines Cost Optimization - A Linear Programming Approach. Proceedings of the 10th IEEE International Conference on Emerging Technologies and Factory Automation, Catania - Italy, Lucia Lo Bello and Thilo Sauter (Ed.), IEEE, 2005, vol. 1, p. 625-632.
     
  • O. Guschinskaya, A. Dolgui, N. Guschinsky, G. Levin. A combined heuristic approach for optimization of a class of machining lines, Proceedings of the 2005 IEEE International Conference on Automation Science and Engineering Edmonton, Canada, August 1 & 2, IEEE, 2005, p. 154-159.
     
  • O. Guschinskaya, A. Dolgui. Conception des machines-outils : prototype d'un système d'aide à la decision. Journées Doctorales et Nationales du GDR MACS: JDMACS -JNMACS 2005, du 5 au 7 Septembre 2005, Lyon - France, 6 pages (CD-ROM).
     
  • A. Dolgui, I. Ihnatsenka. High Quality Lower Bound for a Generalized Transfer Line Balancing Problem. Proceedings of the 18th International Conference on Production Research, July 31 - August 4, 2005, University of Salerno, CD-ROM, ISBN: 88-87030-96-0, 6 pages.
     
  • A. Dolgui, B. Finel, N. Guschinsky, G. Levin, F. Vernadat. MIP Optimisation for Large-Scale Transfer Line Balancing Problems using Decomposition. Proceedings of the 18th International Conference on Production Research, July 31 - August 4, 2005, University of Salerno, CD-ROM, ISBN 88-87030-96-0, 6 pages.
     
  • S. Belmokhtar, A. Dolgui, N. Guschinsky and G. Levin. A new model for transfer line with simultaneous activation of multi-spindle heads at workstations. Proceedings of the 35th International Conference on Computer and Industrial Engineering, June 19-22, Istanbul, Turkey, 2005, CD-ROM, 6 pages.
     
  • A. Dolgui, A. Pashkevich, M. Pashkevich. Robust Bayesian Forecasting for Inventory Management of Slow-Moving Items. Proceedings of the International Conference on Agility (ICAM 2005), Otaniemi, Finland, 27-28 July, 2005, p.105- 113.
     
  • A. Dolgui, A. Pashkevich, K. Semkin. Manufacturing Process Planning for Robotic Arc-Welding Station with Positioning Table. Proceedings of the 6th IEEE International Symposium on Assembly and Task Planning, Montréal, July 19-21, 2005, ISBN: 0-7803-9080-6, IEEE, CD-ROM, 6 pages.
     
  • A. Dolgui, L. Makdessian, F. Yalaoui Deux méthodes d'optimisation multicritère pour l'aide à la conception d'une ligne de production. 6ème Congrès International de Génie Industriel, 7-10 juin, 2005, Besançon, CD-ROM, 10 pages.
     
  • A. Dolgui, N. Guschinsky, G. Levin. Transfer Line Balancing by A Combined Approach. Preprints of the 16th IFAC World Congress, P. Horacek, M. Simandl and P. Zitek (Eds.), Prague, Czech Republic, July 3-8, 2005, CD-ROM, 6 pages.
     
  • A. Dolgui, A. Pashkevich, M. Pashkevich. Bayesian Approach to Modelling of Quasi-Periodic Intermittent Demand. Preprints of the 16th IFAC World Congress, P. Horacek, M. Simandl and P. Zitek (Eds.), Prague, Czech Republic, July 3-8, 2005, CD-ROM, 6 pages.
     
  • A. Dolgui, B. Finel, N. Guschinsky, G. Levin, F. Vernadat A random search and backtraking procedure for transfer line balancing. e-Proceedings of IESM'05 Conference (CD-ROM), MAY 16 - 19, 2005, Marrakech - Morocco, ISBN 2 - 9600532 - 0 - 6, 10 pages.
     
  • S. Belmokhtar, A. Dolgui, N. Guschinsky, G. Levin. Un programme linéaire pour la conception des lignes de transfert à partir d'un ensemble fixe de têtes d'usinage. ROADEF05 6ème Congrès de la Société Française de Recherche Opérationnelle et d'Aide à la Décision. Actes des articles longs. Collection Sciences, Technologies "Informatique", Presses Universitaires François-Rabelais, Tours, 2005, p. 259-275.
     
  • A. Dolgui, N. Guschinsky, G. Levin. MIP Models for Transfer Line Balancing: A Comparison. Proceedings of the 5th International Conference Research and Development in Mechanical Industry (RaDMI 2005), 04 - 07 September 2005, Vrnjacka Banja, Serbia and Montenegro, 10 pages.
     
  • A. Dolgui, A. Pashkevich, M. Pashkevich, F. Grimaud Forecasting risk analysis for supply chains with intermittent demand. International Workshop Performance and Risk Measurement: Operations, Logistics and Supply Chains, CRITOM, December 8-10, 2004, University Bocconi, Milan, Italy, p. 339-348.
     
  • E. Kushtina, A. Dolgui, B. Malachowski. Organization of the modeling and simulation of the discrete processes. In: Computer Information Systems and Applications (Proceedings of the ACS conference), vol. 1, WSFZ, Bialystok, (ISBN: 83-87256-67-6), 2004, Poland, p. 319-327.
     
  • S. Belmokhtar, A. Dolgui, N. Guschinsky, I. Ihnatsenka and G. Levin, Optimization of transfer line by constraint programming approach. Proceedings of the 34th International Conference on Computer and Industrial Engineering, San Francisco, November 13-16, 2004, p. 357-362.
     
  • M.-A. O. Louly, A. Dolgui. Une PSE pour l'optimisation de la Planification des reapprovisionnements des systemes d'assemblage. Actes de la 5e conférence francophone de Modélisation et Simulation "Modélisation et simulation pour l'analyse et l'optimisation des systèmes industriels, Lavoisier, 2004, vol. 1, p. 387-394.
     
  • A. Dolgui, N. Guschinsky, and G. Levin Une Approche de plus court chemin pour l'optimisation des machines-outils. Actes de la 5e conférence francophone de Modélisation et Simulation "Modélisation et simulation pour l'analyse et l'optimisation des systèmes industriels, Lavoisier, 2004, vol. 1, p. 259-266.
     
  • L. Makdessian, A. Dolgui, F. Yalaoui. Quelques approches pour la minimisation du coût des lignes de transfert. Actes de la 5e conférence francophone de Modélisation et Simulation "Modélisation et simulation pour l'analyse et l'optimisation des systèmes industriels, Lavoisier, 2004, vol. 2, p. 677-684.
     
  • A. Pashkevich, A. Dolgui, M. Pashkevich, Modelling And Monitoring of Correlated Faults in Redundant Computer Control Systems. Proceedings of the International Conference on Intelligent Maintenance Systems (IMS'04), K. Adjallah (Ed), July 15-17, Arles, France, 2004, CD-ROM, 6 pages.
     
  • A. Dolgui, A. Eremeev, V. Sigaev. A Hybrid Algorithm for Buffers Allocation in Tandem Production Lines with Unreliable Machines. Proceedings of the 2nd International Workshop on Discrete Optimisation Methods in Production and Logistics, July 20-27 2004, Omsk, Russia, 2004, p. 39-44.
     
  • V. Algin, E. Gimadi, E. Gontcharov and A. Dolgui. Optimal design of machines decicated to a given set of jobs. Proceedings of the 2nd International Workshop on Discrete Optimisation Methods in Production and Logistics, July 20-27 2004, Omsk, Russia, 2004, p. 33-38.
     
  • V. Algin, E. Gimadi, and A. Dolgui. Designing machines for a given volumes and types of jobs, Proceedings of the International Conference "Mechanics of Machines: Theory and Applications", Y.M. Pleskatchvski (Ed), February 10-11 2004, Minsk, Belarus, 2004, ISBN: 985-6637-07-4, p. 132-140.
     
  • A. Dolgui, N. Guschinsky, and G. Levin. Graph approach for design of unit-head machines with a rotary table. Proceedings of the 2nd International Workshop on Discrete Optimisation Methods in Production and Logistics, July 20-27 2004, Omsk, Russia, 2004, p. 114-119.
     
  • A. Dolgui, M. Pashkevich. Generalized beta-binomial model for grouped correlated binary data. Proceedings of the International Workshop on Biometric Technologies (BT'2004), Calgary, Canada, June 22-23, 2004, p. 115-124.
     
  • M.A. Ould Louly, A. Dolgui. An inventory model to supply planning of assembly systems. Pre-prints of the Thirteenth International Working Seminar on Production Economics, Igls, February 126-20, 2004, vol.3, p. 215-222.
     
  • M.A. Ould Louly, A. Dolgui. A branch and bound algorithm for supply planning. Proceedings of the IEEE/IMACS Multi-conference Computational Engineering in Systems Applications (CESA'2003), P. Borne, E. Craye, N. Dangoumau (Eds.), Lille, France, July 9-11, 2003, ISBN 2- 9512309-5-8, CD-ROM, 5 pages.
     
  • A. Dolgui, N. Guschinsky, and G. Levin. Graph Approach for Transfer Lines Balancing: Exact and Heuristic Methods. Proceedings of the 3rd International Conference Research and Development in Mechanical Industry (RaDMI 2003), 19-23, September 2003, Herceg Novi, Serbia and Montenegro, 10 pages.
     
  • B. Finel, A. Dolgui, F. Vernadat. Structuration des lignes de transfert à l'étape de leur conception préliminaire. Proceedings of the 5th International Industrial Engineering Conference "Industrial Engineering and the New Global Challenges", D. Ait-Kadi, S. D'Amours (Eds.), 26 au 29 octobre 2003, Québec, Canada, ISBN 2-9808240-0-3, CD-ROM, 10 pages.
     
  • A. Bratcu, L. Makdessian, A. Dolgui. Minimisation of equipment cost for transfer lines with blocks of parallel tasks. Proceedings of the 2003 IEEE International Symposium on Assembly and Task Planning (ISATP'03), Besançon, July 10-11, 2003, IEEE, p. 109-114.
     
  • A. Dolgui, N. Guschinsky, G. Levin. Balancing Production Lines Composed by Series of Workstations with Parallel Operations Blocks. Proceedings of the 2003 IEEE International Symposium on Assembly and Task Planning (ISATP'03), Besançon, July 10-11, 2003, IEEE, p. 122-127.
     
  • M.A. Ould Louly, A. Dolgui, An algorithm for the MRP parametrization under uncertainty, Proceedings of the International Conference on Industrial Engineering and Production Management (IEPM'03), Porto, Portugal, May 26-28, 2003, p. 374-383.
     
  • A. Dolgui, L. Makdessian, F. Yalaoui. Equipment Cost Minimization for Transfer Line with Blocks of Parallel Operations, Proceedings of the International Conference on Industrial Engineering and Production Management (IEPM'03), Porto, Portugal, May 26-28, 2003, p. 412- 421.
     
  • A. Bratcu, A. Dolgui. Une relaxation du modèle normatif des lignes de production auto-équilibrées ("Bucket Brigades"). Actes de la 4e conférence francophone de modélisation et de simulation "Organisation et Conduite d'Acctivités dans l'Industrie et les Services" (MOSIM'03), Y. Dallery, J-C. Hennet, P. Lopez (Eds.), SCS European Publishing House, 2003, p. 262-269.
     
  • A. Dolgui, B. Finel, N. Guschinsky, G. Levin, F. Vernadat. Load Balancing for Transfer Lines: new algorithms and some comparisons, Proceedings of the International Conference on Production System Design, Supply Chain Planning and Optimization, 23-25 October, 2002, Poland. Informa, Szczecin, 2002, p. 13-21.
     
  • Y. Sotskov, A. Dolgui, N. Sotskova, F. Werner. Stability of the Assembly Line Balance Optimality: Case of a Fixed Stations Number, Proceedings of the International Conference on Production System Design, Supply Chain Planning and Optimization, 23-25 October, 2002, Poland. Informa, Szczecin, 2002, p. 21-29.
     
  • M. Pashkevich, A. Dolgui. Robust Modeling of Consumer Behavior, Proceedings of the International Conference on Production System Design, Supply Chain Planning and Optimization, 23-25 October, 2002, Poland. Informa, Szczecin, 2002, p. 285-293.
     
  • A. Dolgui, G. Levin. A Problem of Production Planning Optimization under Uncertainties, Proceedings of the 18th International Conference on CAD/CAM, Robotics and Factory of the Future (CARS&FOF), J.J. Pinto Ferreira (Ed.), Porto, Portugal, July 2002, INESC Porto, ISBN 972-95194-5-5, p. 341-348.
     
  • A. Dolgui, B. Finel, N. Guschinsky, G. Levin, F. Vernadat. A Transfer Line Design and Balancing Approach, Proceedings of the 1st CIRP (UK) International Seminar on "Digital Enterprise Technology", Durham, UK, September 16-19, 2002, CD-ROM, 4 pages.
     
  • A. Bratcu, A. Dolgui, L. Makdessian, F. Yalaoui. Balancing and Optimal Cost Resource Planning of Production Lines, Proceedings of the 1st CIRP (UK) International Seminar on "Digital Enterprise Technology", Durham, UK, September 16-19, 2002, CD-ROM, 4 pages.
     
  • M.A. Ould-Louly et A. Dolgui. The MPS parametrization under lead time uncertainty, Preprints of the Twelfth International Seminar on Production Economics, Igls, February 18-22, 2002, vol. 1, p. 209-214.
     
  • O. Zaikin, J. Soldek, W. Woloszyn and A. Dolgui. Resource allocation in the intelligent supply chain, Proceedings of the 4th International Conference on Quality, Reliability and Maintenance (QRM 2002), 21-22 March 2002, Oxford, G.J. McNulty (Ed) Professional Engineering Publishing Limited, London, UK, p. 103-106.
     
  • M.-A. Ould Louly and A. Dolgui. A Markov Model for Supply Planning of Assembly Systems, Proceedings of the 4th IEEE International Symposium on Assembly and Task Planning, Fukuoka, Japan, 28-30 May, 2001, IEEE, p. 300-305.
     
  • Y. Sotskov, A. Dolgui. Stability radius of the optimal assembly line balance with fixed cycle time, Proceedings of the 8th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA'2001), October 18-21, 2001, France. IEEE, 2001, p. 623-628.
     
  • A. Pashkevich, A. Dolgui, O. Chumakov. Computer aided programming of robotics cells for laser cutting applications, Proceedings of the 8th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA'2001), October 18-21, 2001, France. IEEE, 2001, p. 603-612.
     
  • M.-A. Ould Louly and A. Dolgui. Une généralisation du modèle de newsboy pour la planification d'un système d'assemblage, Actes de la 3e conférence francophone de Modélisation et de Simulation (MOSIM'01) "Conception, analyse et gestion des systèmes industriels", 25-27 avril 2001, Troyes, SCS Publishing House, 2001, p. 559-566.
     
  • A. Dolgui, N. Guschinsky, Y. Harrath, G. Levin. Une approche de programmation linéaire pour la conception des lignes de transfert, Actes de la 3e conférence francophone de Modélisation et de Simulation (MOSIM'01) "Conception, analyse et gestion des systèmes industriels", 25-27 avril 2001, Troyes, SCS Publishing House, 2001, p. 353-360.
     
  • M.-A. Ould Louly and A. Dolgui. A Generalized Newsboy Model for Supply Planning of Assembly System, Proceedings of the 28th International Conference on Computer and Industrial Engineering, Florida, USA, March 5-7, 2001, p. 620-626.
     
  • A. Dolgui, N. Guschinsky, G. Levin. A Mixed Integer Program for Balancing of Transfer Line with Grouped Operations, Proceedings of the 28th International Conference on Computer and Industrial Engineering, Florida, USA, March 5-7, 2001, p. 541-547.
     
  • A. Dolgui, A. Ereemev, A. Kolokolov and V. Sigaev. Optimization of Buffer Allocation in Production Line, Proceedings of the 28th International Conference on Computer and Industrial Engineering, Florida, USA, March 5-7, 2001, p. 534-540.
     
  • A. Dolgui, A.V. Eremeev,. A.A. Kolokolov, V.S. Sigaev Optimization of buffer devices allocation in automatic lines. Proceedings of 12th International Seminar on Optimisation and its Applications (Trudi 12-i Baikalskoi mezhdunarodnoi shkoli-seminara "Metodi optimizacii i ihprilozhenija"). Irkutsk, 2001, vol.1, p. 138-143. (in Russian)
     
  • P. Korytkowski, O. Zaikin, A. Dolgui. Optimization of resource allocation in a distributed production network, Proceedings of the Second International Workshop of Central and Eastern Europe on Multi-Agent Systems, CEEMAS'01, Krakow, Poland, 26-29 September 2001, p. 337-345.
     
  • A. Dolgui, P. Lacomme, and D. Bekhouche. Discrete-Event Simulation Model For Performances Analysis in An Industrial Cas Study. 18-20 October 2001, Proceedings of the 13th European Simulation Symposium on Simulation in Industry, SCS Publishing House, 2001, Marseilles, France, p. 270-271.
     
  • M.A. Ould Louly, and A. Dolgui. An optimal policy for supply planning of assembly systems with service level constrain. Proceedings of the 13th European Simulation Symposium on Simulation in Industry, Marseilles, October 18-20, 2001, SCS Publishing House, 2001, France. p. 250-254.
     
  • M.A. Ould Louly, and A. Dolgui. An exact supply planning method for assembly systems, Proceedings of the International Conference on Industrial Engineering and Production Management (IEPM'2001). Quebec city, Canada, August 20-23, 2001, p. 304-313.
     
  • M.-A. Ould Louly and A. Dolgui. The MPS planning under lead time uncertainty, Proceedings of the Workshop on Production Planning and Scheduling, 2-4 October 2000, Mons, FUCAM, p. 148-155.
     
  • A. Dolgui, A. Ereemev, A. Kolokolov and V. Sigaev. A Genetic Algorithm for Buffer Allocation in Production Line with Unreliable Machines, Proceedings of the International Workshop "Discrete Optimization Methods in Scheduling and Computer-Aided Design", J.M. Proth and V.S. Tanaev (Eds.), September 4-6, 2000, Minsk, p. 26-32.
     
  • Y. Sotskov, A. Dolgui and F. Werner. Optimal Coloring of the Vertices from the Union of Path and Cliques, Proceedings of the International Workshop "Discrete Optimization Methods in Scheduling and Computer-Aided Design", J.M. Proth and V.S. Tanaev (Eds.), September 4-6, 2000, Minsk, p. 93-99.
     
  • A. Dolgui, N. Guschinsky, and G. Levin. A decomposition method to minimize a quasiseparable function of paths lengths in network and its application to optimal transmission design, Proceedings of the International Workshop "Discrete Optimization Methods in Scheduling and Computer-Aided Design", J.M. Proth and V.S. Tanaev (Eds.), September 4-6, 2000, Minsk, p. 32-35
     
  • A. Dolgui and O. Zaikin. Queueing Network Models for a Capacity Allocation Problem, Proceedings of the 14th European Simulation Multiconference (ESM'2000), Ghent, Belgium, May 2000, SCS, 2000, p. 315-317.
     
  • O. Zaikin. and A. Dolgui. Queueing Modelling and Simulation of the Ressource Assignment in a Distributed Production Network. Proceedings of the International Conference on Advanced Computer Systems, Szczecin, Poland, October 2000, INFORMA, 2000, p. 182-188.
     
  • A. Dolgui, N. Guschinski and G. Levin. Optimization in design of multiunit mechanical transmission systems, Proceedings of the 2nd International Conference on Mathematics and Computers in Mechanical Engineering (MCME2000), July 10-14, 2000, Athens, Greece, CD-ROM, Paper N 536, 6 pages.
     
  • A. Dolgui, N. Guschinski and G. Levin. Optimizing Parameters of Transfer Lines with Parallel Machining, Proceedings of the 16th International Conference on CAD/CAM, Robotics and Factories of the Future (CARS&FOF2000), Trinidad W.I., IEE/ISPE, 2000, p. 317-324.
     
  • A. Dolgui, N. Guschinski, K. Hamou, G. Levin. Affectation optimale des opérations de fabrication aux postes de travail pour des lignes de production automatisées, Actes de la Première Conférence Internationale Francophone d'Automatique (CIFA'2000), Lille, France, 5-8 juillet, 2000, IEEE, p. 242-246.
     
  • K. Adjallah, A. Dolgui, M.-A. Louly, Y. Castellani. Modélisation et optimisation de stocks de pièces de rechange d'un système industriel reparti, Actes du 12ème Colloque National de Sûreté de fonctionnement, Montpellier, 28-30 mars 2000, p. 455-461.
     
  • A. Dolgui and M-A. Louly. An approach for supply chain planning optimization, Pre-prints of the Eleventh International Working Seminar on Production Economics (IGLS 2000), IGLS/Innsbruck, Austria, February 21-25, 2000, p. 85-89.
     
  • O. Zaikin, A. Dolgui and P. Kraszewski. Simulation Model for Optimization of Resource Allocation in Queuning Networks, Proceedings of the IMACS Symposium on Mathematical Modeling (3rd MATHMOD), February 2-4, 2000, Vienna, Austria, ARGESIM Report N°15 (ISBN 3-901608-15-X), Vol. 1, p. 485-488.
     
  • A. Dolgui and M-A. Louly. Methods and Tools For Supply Chain Integration. Proceeding of the Sixth International Conference on Advanced Computer Systems (ACS'99), Szczecin, Poland, November 18-19, 1999, p. 305-309.
     
  • A. Dolgui, N. Guschinski and G. Levin. On Problem of Optimal Design of Transfer Lines with Parallel and Sequential Operations, Proceedings of the 7th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA'99). October 18-21, 1999, Barcelona, Spain. J.M. Fuertes (Ed.), IEEE, 1999, vol. 1, p. 329-334.
     
  • A. Dolgui, On problem of transportation operations control in automated assembly lines. Proceedings of the IASTED International Conference on Robotics and Applications, October 28-30, 1999, Santa Barbara, California, USA, 1999, IASTED Acta Press, 1999 (ISBN 0-88986-265-6), p. 52-57.
     
  • A. Dolgui, N. Guschinsky and G. Levin. Models and Methods of Multicriteria Optimization for Computer Aided Design of Multi-Unit Mechanical Transmission Systems, Proceedings of the European Control Conference (ECC'99). Karlsruhe, Germany, 31 August-3 September 1999, CD-ROM, 6 pages. (and in Summaries Volume, p. 763).
     
  • A. Dolgui, Ch. Thirion. Utilisation des plans d'expériences pour le paramétrage des heuristiques d'ordonnancement dans un atelier job-shop, Actes de la deuxième conférence francophone de Modélisation et Simulation (MOSIM'99), G. Habchi, A. Haurat (Eds.), SCS Publication, 1999, p. 351-356.
     
  • O. Zaikin, A. Dolgui, P. Kraszewski, A. Pashkevich. Queueing Modeling of the Resource Allocation in the Satellite Telecommunication Network, Proceedings of the International Conference on Distributed Computer Communication Networks (DCCN'99), Holon Institute of Technology Arts and Sciences, Israel, 1999, p. 222-229.
     
  • A. Dolgui, N. Guschinsky and G. Levin. Graph optimization methods for computer-aided design of power transmission systems, Proceedings of the International Conference on Industrial Engineering and Production Management (IEPM'99), FUCAM, Glasgow, July 12-15, 1999, Book 1, p. 75-83.
     
  • V. Sysoev and A. Dolgui. A Pareto optimization approach for manufacturing system design, Proceedings of the International Conference on Industrial Engineering and Production Management (IEPM'99), FUCAM, Glasgow, July 12-15, 1999, Book 2, p. 116-125.
     
  • A. Dolgui, V. Sysoev. Un exemple d'optimisation multicritère en conception des systèmes de production, Actes du 3ème Congrès International de Génie Industriel. Montréal, Canada, 26-28 mai 1999. Presses Internationales Polytechnique, 1999, vol. 1, p. 575-584.
     
  • A. Dolgui, N. Guschinski and G. Levin. Optimal Design of Transfer Lines and Multi-position Machines, Proceedings of the 7th IEEE Mediterranean Conference on Control and Automation (MED'99). Haifa, Israel, June 28-30, 1999, CD-ROM, p. 1962-1973.
     
  • A. Dolgui, N. Guschinsky, G. Levin. Decision Support System for CAD of Multiunit Mechanical Transmissions, Proceedings of the 6-th International Conference on Advanced Computer Systems, November 18-19, 1999, Sczcezin, Poland, p. 456-461.
     
  • V.S. Gordon, C. Chu and A. Dolgui. Single Machine Scheduling with SLK Due Date Assignment, Proceedings of the 5th International Conference of the Decision Sciences Institute (DSI'99). Athens, Greece. July 4-7, 1999, D.K. Despotis, C. Zopounidis (Eds.), p. 1711-1713.
     
  • O. Zaikin, A. Dolgui and P. Kraszewski. Simulation Approach to Resource Allocation in the Satellite Telecommunication Network, Proceedings of the 13th European Simulation Multiconference (ESM'99), Warsaw, Poland June 1-4, 1999, H. Szczerbicka (Ed.), SCS Publication, 1999, vol. II, p. 157-161.
     
  • O. Zaikin and A. Dolgui. Resource Assignment in Mass Demand High-Tech Assembly Manufacturing Based on the Queuning Modeling, Proceedings of the International Conference on Industrial Logistics (ICIL'99), St. Petersburg, Russia, 28 June- 1 July, 1999, University of Southampton publication, p. 200-209.
     
  • O. Zaikin, P. Kraszewski and A. Dolgui. A problem of optimal channel assignment in TDM system Inmarsat-C. Proceedings of the 6th conference Regional Informatics-98 (RI-98), St Petersburg, Russia, June 2-4, 1998, UNESCO, 1999, p. 73-78.
     
  • O. Zaikin, P. Kraszewski and A. Dolgui. Queuing based approach to resource allocation in the satellite telecommunication networks, Proceedings of the Workshop "Distributed Computer Communication Networks: Architecture, Design and Resource Allocation" (DCCN'98), Moscow, 1998, p. 96-109.
     
  • A. Dolgui. Planification des systèmes d'assemblage avec demande et délais d'approvisionnement aléatoires, Actes de Deuxièmes Journées Francophone de Recherche Opérationnelle (FRANCORO II), 6-8 avril 1998, Sousse, Tunisie, F. Ben Abdelaziz, M. Haouari et K. Mellouli (Eds.), CPU Press, 2000, p. 265-272.
     
  • A. Dolgui, D. Ofitserov. Méthode de psi-transformation discrète et son application aux problèmes combinatoires en gestion de production, Actes de Deuxièmes Journées Francophone de Recherche Opérationnelle (FRANCORO II), 6-8 avril 1998, Sousse, Tunisie, F. Ben Abdelaziz, M. Haouari et K. Mellouli (Eds.), CPU Press, 2000, p. 25-32.
     
  • A. Dolgui. Supply and Production Management for Assembly Systems with Random Yield Times, Proceedings of the 2nd IMACS/IEEE Multiconference "Computational Engineering in Systems Applications" (CESA'98), P. Borne, M. Ksouri and A.El Kamel (Eds.), Nabeul-Hammamet, Tunisia, April 1-4, Vol.3, Symposium on Industrial and Manufacturing Systems, 1998, p. 312-316.
     
  • A. Dolgui, V. Sipko, V.Sysoev, A. Movshin and O. Belitski. Supply and Production Planning in Assembly Systems, Proceedings of the 2nd IMACS/IEEE Multiconference "Computational Engineering in Systems Applications" (CESA'98), P. Borne, M. Ksouri and A.El Kamel (Eds.), Nabeul-Hammamet, Tunisia, April 1-4, Vol.2, Symposium on Applied Mathematics and Optimization, 1998, p. 41-44.
     
  • A. Dolgui, N. Guschinsky and G. Levin. Multicriteria optimization of Multiunit Mechanical Transmission Systems, Proceedings of the Fifth International Conference "Advanced Computer Systems" (ACS'98), Szczecin, Poland, 1998, p. 450-457.
     
  • V. Sysoev, A. Dolgui, I.G. Amrahov and A.O. Movshin. A Multicriteria Optimization Method for Manufacturing System Design, Proceedings of the Fifth International Conference "Advanced Computer Systems" (ACS'98), Szczecin, Poland, 1998, p. 479-485.
     
  • A. Dolgui. Utilisation de psi-transformation pour l'optimisation des paramètres des modèles de simulation, Actes de la Première Conférence Francophone de Modélisation et de Simulation "MOSIM'97 : Systèmes de Production et de Logistique", 5-6 juin 1997, Rouen, Editions Hermès, 1997, p. 451-459.
     
  • A. Dolgui and D. Ofitserov. Approximate Algorithms for Makespan Optimization in Flow-Shop Scheduling, Preprints of the IFAC/IFIP Conference on Management and Control of Production and Logistics (MCPL'97), Binder Z., Hirsch B.E., Aguilera L.M. (Eds.), 31 August-3 September 1997, Brazil, p. 359-364.
     
  • O. German, A. Sukhodolski, E. Belitskaya, A. Dolgui and Y. Basjuk. Formal Specification Language for Industrial Logistics, Preprints of the IFAC/IFIP Conference on Management and Control of Production and Logistics (MCPL'97), Binder Z., Hirsch B.E., Aguilera L.M. (Eds.), 31 August-3 September 1997, Brazil, p. 600-604.
     
  • D. Ofitserov and A. Dolgui. Optimization of Manufacturing System Behavior, Proceedings of the Multiconference IMACS/IEEE "Computational Engineering in Systems Applications" (CESA'96), Lille, July 1996, p. 641- 647.
     
  • O. German and A. Dolgui. Methodological Aspects of the Structured Simulation Approach, Proceedings of the Third International Conference "Application of Computer Systems" (ACS'96), November 21-22, 1996, Szczecin, p. 123-131.
     
  • A. Dolgui. Analysis of Control Algorithms for Transportation Devices in a Manufactured Automated Workshop, Proceedings of the Third International Symposium on Methods and Models in Automation and Robotics (MMAR'96), September 10 -13, 1996, Miedzyzdroje, p. 1035-1040.
     
  • A. Dolgui. A Model of Manufacturing Production Workshop, Proceedings of the Second International Conference "New Information Technologies in Education" (NITE'96), November 12-14, 1996, Minsk, p. 131-138.
     
  • L. Barros, K. Adjallah, C. Chu, A. Dolgui and G. Houset. Selecting a FMS for an Academic Setting Using Industrial Project Analysis Methods. Proceedings of the Second International Conference "New Information Technologies in Education" (NITE'96), November 12-14, 1996, Minsk, p. 227-234.
     
  • A. Dolgui. Un simulateur pour les tests des systèmes de commande d'atelier flexible en temps réel, Proceedings of the Second International Conference on Industrial Automation, IAIA/AFCET, June 7-9, 1995, Nancy, 1995, vol. 1, p. 55-60.
     
  • A. Dolgui and I. Svirine. Packaged Programs for the Analysis of Asynchronous Parallel Processes Correctness in Control Algorithms, Proceedings of the International Symposium INFO-89, Minsk, November 9-12, 1989, vol. 1, p. 793-799.

     Conference presentations with publication of abstracts only

  • A. Dolgui. Graph approach for optimal design of transfer machine with rotary table, Proceedings (abstract) of 2015 IEEE Symposium on Analytics and Risk in Complex Management Systems (ISARCRM 2015), Beijing, University of Chinese Academy of Sciences, S. Wang and D. Wu (Eds), ISBN 978-1-9266642-15-4, August 14-15, 2015, Beijing, China, p. 7.
     
  • C. Serrano, X. Delorme, A. Dolgui. Programmation des activités dans une plateforme cross-dock internationale : Cas d'étude chez Renault. Le 16è congrès de la société française de recherche opérationnelle et aide à la décision (ROADEF'2015). 25 - 26, Février 2015, Marseille, France.
     
  • M.L. Bentaha, O. Battaïa, A. Dolgui. Conception combinatoire des lignes de désassemblage sous incertitudes. Le 16è congrès de la société française de recherche opérationnelle et aide à la décision (ROADEF'2015). 25 - 26, Février 2015, Marseille, France.
     
  • M.K.K. Habibi, O. Battaïa, V.-D. Cung, A. Dolgui. Combining Procurement and Disassembly Decisions for End-of-Life Product. Le 16è congrès de la société française de recherche opérationnelle et aide à la décision (ROADEF'2015). 25 - 26, Février 2015, Marseille, France.
     
  • V. Borodin, A. Dolgui, F. Hnaien, N. Labadie. Chance-constrained programming for one level assembly system under random lead times. The 18th International Symposium on Inventories, Budapest, Hungary, 18-22 August 2014.
     
  • M.L. Bentaha, O. Battaïa, A. Dolgui. A sample average approximation method for disassembly line design under uncertainty, European Conference on Stochastic Programming and Energy Applications, 1st EURO Mini-Conference, Paris, France, September 24-26, 2014.
     
  • O. Battaïa, X. Delorme, A. Dolgui, J. Hagemann, S. Kovalev, S. Malyutin. Optimal Design of Assembly Lines with Flexible Workers, 20th Conference of the International Federation of Operational Research Societies (IFORS), 13-18 July 2014, Barcelona, Spain.
     
  • X. Delorme, A. Dolgui, S. Malyutin. A multi-objective algorithm for balancing reconfigurable transfer lines, 20th Conference of the International Federation of Operational Research Societies (IFORS), 13-18 July 2014, Barcelona, Spain.
     
  • A. Dolgui, K. Schemeleva, X. Delorme, F. Grimaud. Lot-Sizing and Lot Sequencing on a Single Imperfect Machine with Breakdowns and Product Rejects, 20th Conference of the International Federation of Operational Research Societies (IFORS), 13-18 July 2014, Barcelona, Spain.
     
  • O. Ben Ammar, A. Dolgui, H. Marian, Supply Planning for Assembly Systems under Stochastic Lead Times, An example of university-industry based R&D for machining industry in France, The 34th Conference for Operations Research and Industrial Engineering (YAEM 2014), June 25 - 27, 2014, Görükle Campus of Uludag University, Bursa, Turkey.
     
  • A. Chibani, X. Delorme, A. Dolgui, H. Pierreval. Une sélection de fournisseurs pour l'adaptation de la chaîne logistique: une approche d'optimisation dynamique, 15ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), 26 au 28 février 2014, Université de Bordeaux.
     
  • M.L. Bentaha, O. Battaïa, A. Dolgui. Relaxation lagrangienne pour le problème de conception de lignes de désassemblage sous incertitudes, 15ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), 26 au 28 février 2014, Université de Bordeaux.
     
  • A. Dolgui, A.Eremeev, M. Kovalyov, V. Sigaev. On Complexity of Buffers Allocation Problems for Production Lines with Unreliable Machines, Abstracts of the IV International Conference on Optimization Methods and Applications (OPTIMA-2013), September 22-28, 2013, Petrovac, Montenegro, p. 175.
     
  • A. Dolgui, S. Kovalev, M.Y. Kovalyov, J. Nossack, E. Pesch. Minimizing station activation costs in a line design problem, EURO-INFORMS 26th European Conference on Operational Research, Rome, Italy, July 1-4, 2013.
     
  • F. Makssoud, O. Battaïa, A. Dolgui. A new formulation for the assembly line re-balancing problem, The 26th Conference of the European Chapter on Combinatorial Optimization (ECCO), Paris, France, May 30 - June 1, 2013, abstracts of contributed talks, p. 128.
     
  • S. Kovalev, X. Delorme, A. Dolgui, A. Oulamara. Minimizing station activation costs in a multi-model transfer line with parallel operations at workstations, The 26th Conference of the European Chapter on Combinatorial Optimization (ECCO), Paris, France, May 30 - June 1, 2013, abstracts of contributed talks, p. 108.
     
  • F. Makssoud, O. Battaïa, A. Dolgui. Reconfiguration des lignes d'usinage de transfert, 14ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Troyes, les 13-15 février 2013, 2 pages sur CD-ROM, p. 118 dans le programme.
     
  • M.L. Bentaha, O. Battaïa, A. Dolgui. Equilibrage deslignes de desassemblage sous incertitude en présence de composants polluants, 14ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Troyes, les 13-15 février 2013, 2 pages sur CD-ROM, p. 119 dans le programme.
     
  • O. Ben Ammar, F. Hnaien, H. Marian, A. Dolgui. Planification des réapprovosopnnements pour un système d'assemblage à deux niveaux quand les délais d'approvisionnement sont aléatoires, 14ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Troyes, les 13-15 février 2013, 2 pages sur CD-ROM, p. 49 dans le programme.
     
  • A. Rossi, E. Gurevsky, O. Battaïa, A. Dolgui. Maximisation du rayon de stabilité pour l'affectation d'opérations de durée incertaine sur une ligne d'assemblage. 14ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Troyes, 2013, les 13-15 février 2013, 2 pages sur CD-ROM, p. 99 dans le programme.
     
  • O. Battaïa, N. Guschinsky, A. Dolgui, G. Levin. Mathematical models for selection of process plans at preliminary design of modular transfer lines using group technology for machining of different products, Proceedings of the 7th International conference on IT in Industry (ITI 2012), October 30-31, Minsk, Belarus, 2012, 2 pages (In Russian).
     
  • E.R. Gafarov, A. Dolgui. Solution algorithms for the two-station single track railway scheduling problem, Proceedings of the 7th International conference on IT in Industry (ITI 2012), October 30-31, Minsk, Belarus, 2012, p. 111-112.
     
  • O. Ben Ammar, H. Marian, A. Dolgui. MRP parameterization for multi-level assembly system under random lead times, Proceedings of the 7th International conference on IT in Industry, October 30-31, Minsk, Belarus, 2012, p. 23-24.
     
  • M.L. Bentaha, O. Battaïa, A. Dolgui. A stochastic formulation of the disassembly line balancing problem, Proceedings of the 7th International conference on IT in Industry (ITI 2012), October 30-31, Minsk, Belarus, 2012, p. 29-30.
     
  • E. Gafarov, A. Dolgui, A. Lazarev. Two station single track railway scheduling problem with equal speed of trains, 21st International Symposium on Mathematical Programming, August 19-24, 2012, Berlin, Germany.
     
  • M. L. Bentaha, O. Battaïa, A. Dolgui, F. Grimaud, A stochastic formulation of the disassembly line balancing problem, 25-th Conference on Operational Research (EURO'2012), July 8-11, 2012, Vilnius, Lithuania, p. 131.
     
  • A. Dolgui, S. Kovalev, M.Y. Kovalyov, J. Nossack, E. Pesch. Batch scheduling and transfer line design problems. 25-th Conference on Operational Research (EURO'2012), July 8-11, 2012, Vilnius, Lithuania, p. 88.
     
  • O. Battaïa, A. Dolgui, N. Guschinsky, G. Levin. Combinatorial optimization techniques for the design of reconfigurable machines. 25-th Conference on Operational Research (EURO'2012), July 8-11, 2012, Vilnius, Lithuania, p. 160.
     
  • A. Dolgui, S. Kovalev Minimisation du coût de sélection d’outils par les approches Min-Max et Min-Max Regret, 13ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d’Aide à la Décision (ROADEF), 11 au 13 avril 2012, Angers, 2 pages
     
  • E. Gurevsky, O. Battaïa, B. Detienne, A. Dolgui, Étude expérimentale de la sensibilité de configurations d'un système d'assemblage en présence de données incertaines, 13ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), 11 au 13 avril 2012, Angers, 2 pages
     
  • P. Borisovsky, X. Delorme, A. Dolgui. A genetic algorithm for line balancing with parallel machines. The Fifth All-Russia Conference "Optimization Problems and their Economical Applications", 2-6 July 2012, Omsk, Russia, 1 page.
     
  • X. Delorme, M. Essafi, A. Dolgui, Conception d'une ligne d'usinage reconfigurable à l'aide d'un algorithme génétique multiobjectif, 12ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Saint-Etienne, les 2-4 mars 2011, clé USB, 2 pages.
     
  • N. Guschinsky, G. Levin, A. Dolgui, Optimisation des transmissions hydromécaniques de boites de vitesses, 12ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Saint-Etienne, les 2-4 mars 2011, clé USB, 2 pages.
     
  • P. Borisovsky, A. Dolgui, S. Kovalev. A minimum cost transfer line design problem: A set partitioning model and computer experiments, 12ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Saint-Etienne, les 2-4 mars 2011, clé USB, 2 pages.
     
  • A. Dolgui, N. Guschinsky, G. Levin. Choix de gammes d'usinage pour la conception des machines spéciales travaillant par batch multi-produit ou Reconfigurables, 12ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Saint-Etienne, les 2-4 mars 2011, clé USB, 2 pages.
     
  • G. Levin, B. Rosin, A. Dolgui, Optimisation du processus d'usinage pour les machines spéciales à boîtiers multibroches, 12ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Saint-Etienne, les 2-4 mars, 2011, clé USB, 2 pages.
     
  • M.-A. Ould-Louly, A. Dolgui, F. Hnaien. B&B algorithm for supply planning of multilevel serial systems with stochastic lead times, 12ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Saint-Etienne, les 2-4 mars 2011, clé USB, 2 pages.
     
  • F. Hnaien, A. Dolgui, M.-A. Ould-Louly. Planification multi-période des réapprovisionnements d'un système d'assemblage à plusieurs niveaux face aux aléas des délais d'approvisionnements, 12ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Saint-Etienne, les 2-4 mars 2011, clé USB, 2 pages.
     
  • O. Benammar, H. Marian, A. Dolgui, Paramétrage de logiciels MRP dans un environnement incertain, 12ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Saint-Etienne, les 2-4 mars 2011, clé USB, 2 pages.
     
  • E. Gurevsky, O. Hazir, A. Dolgui, Équilibrage robuste flexible de SALBP-1 avec les données incertaines, 12ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Saint-Etienne, les 2-4 mars 2011, clé USB, 2 pages.
     
  • O. Hazir, A. Dolgui, U-shaped assembly line balancing under uncertainty: A robust optimization model, 12ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Saint-Etienne, les 2-4 mars 2011, clé USB, 2 pages.
     
  • A. Dolgui, S. Kovalev. Robust optimization approaches to minimum cost tools selection problems, 12ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Saint-Etienne, les 2-4 mars 2011, clé USB, 2 pages.
     
  • A. Dolgui, J.-M. Proth. A survey on RFID technology and its impact on enterprises, 12ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Saint-Etienne, les 2-4 mars 2011, clé USB, 2 pages.
     
  • A. Dolgui, A.A. Eremeev and V.V. Sygaev. A problem of buffer allocation in production lines: complexity analysis and genetic algorithms, International Conference on Metaheuristics and Nature Inspired Computing (META'2010), October 27-31, 2010, Djerba, Tunisia, USB flash, 2 pages.
     
  • X. Delorme, A. Dolgui, M. Kovalyov, Combinatorial design of a minimum cost machining line, Workshop New Challenges in Scheduling Theory, September, 12-17, 2010, Centre CNRS "La Villa Clythia", Frejus, France, http://www-id.imag.fr/FREJUS10/schedule.php
     
  • A. Dolgui, K. Shchamialiova, F. Grimaud, A lot-sizing and scheduling problem under uncertainties. Book of abstracts of the 24th European Conference on Operational Research, Lisbon, July 11-14, 2010, Portugal, session WD-39, p. 285.
     
  • A. Dolgui, A. Eremeev, V. Sigaev, Metaheuristics for buffer allocation in tandem production lines, Proceedings of the 60th IIE Annual Conference, June 5-9, 2010, Cancun Mexico, CD-ROM.
     
  • X. Delorme, A. Dolgui, M. Kovalyov, Balancing and Equipment Selection of Modular Machining Lines, Proceedings of the 60th IIE Annual Conference, June 5-9, 2010, Cancun Mexico, CD-ROM.
     
  • E. Gurevsky, O. Guschinskaya, A. Dolgui, Analyse de sensibilité pour le problème d'équilibrage des lignes d'assemblage de type SALBP-2, 11ème Congrès de la Société Française de Recherche Opérationnelle et Aide à la Décision (ROADEF), CD-ROM, Toulouse, LAAS-CNRS, 24-26 février, 2010, 2 pages.
     
  • X. Delorme, A. Dolgui, M. Kovalyov, Conception combinatoire des lignes de transfert avec les boîtiers multibroches, 11ème Congrès de la Société Française de Recherche Opérationnelle et Aide à la Décision (ROADEF),CD-ROM, Toulouse, LAAS-CNRS, 24-26 février, 2010, 2 pages.
     
  • K. Schemeleva, A. Dolgui, Un problème de lotissement et de séquencement pour une ligne de production soumise aux aléas, 11ème Congrès de la Société Française de Recherche Opérationnelle et Aide à la Décision (ROADEF), CD-ROM, Toulouse, LAAS-CNRS, 24-26 février, 2010, 2 pages.
     
  • M. Essafi, X. Delorme, A. Dolgui, Une métaheuristique basée sur le Path-Relinking pour l'optimisation d'un problème d'équilibrage de lignes de transfert, 11ème Congrès Annuel de la Société Française de Recherche Opérationnelle et d’Aide à la Décision (ROADEF), CD-ROM, Toulouse, LAAS-CNRS, 24-26 février, 2010, 2 pages.
     
  • A. Dolgui, O. Guschinskaya, N. Guschinsky, G. Levin. A new batch scheduling problem in machining environment, Book of abstracts of the 23rd European Conference on Operational Research, Bonn, July 5 - 8, 2009, session MA-17, p. 8.
     
  • A. Dolgui, F. Grimaud, G. Levin, K. Shchamialiova. A new problem of lot-sizing and sequencing under uncertainties. Book of abstracts of the 23rd European Conference on Operational Research, Bonn, July 5 - 8, 2009, session MA-17, p. 8.
     
  • I. Ihnatsenka and A. Dolgui. Design of Transfer Lines with Parallel Spindle Heads, IT technologies and Management Conference, Grodno, Belarus, April 21-24, 2009 (in Russian).
     
  • M. Essafi, X. Delorme and A. Dolgui, Un algorithme basée sur GRASP pour la résolution d’un MLBP avec des contraintes liées aux choix d’équipements, 10ème Congrès de la Société Française de Recherche Opérationnelle et Aide à la Décision (ROADEF), Livre des résumés, Nancy-Université, INRIA, 10-12 février, 2009, p. 137-139.
     
  • F. Hnaien, X. Delorme, A. Dolgui, Un algorithme bi-objectif pour les systèmes d’assemblage bi-niveau avec incertitude de délais d’approvisionnement, 10ème Congrès de la Société Française de Recherche Opérationnelle et d’Aide à la Décision (ROADEF), Livre des résumés, Nancy-Université, INRIA, 10-12 février, 2009, p. 223-224.
     
  • A. Dolgui, M.Y. Kovalyov, and K. Shchamialiova, Lotissement et séquencement sur une machine imparfaite avec temps de changement de séries, 10ème Congrès de la Société Française de Recherche Opérationnelle et Aide à la Décision (ROADEF), Livre des résumés, Nancy-Université, INRIA, 10-12 février, 2009, p. 352-353.
     
  • A. Dolgui, B. Finel, N. Guschinsky, G. Levin, F. Vernadat. Best paper presentation: Best Paper Award of IIE Transactions on Design and Manufacturing, IIE Annual Conference and Expo 2008, May 17-21, Vancouver, British Colombia, Canada.
     
  • M. Essafi, X. Delorme, A. Dolgui. Une heuristique en deux phases pour l'équilibrage d'une ligne d'usinage avec set-up et machines parallèle. 9ème Congrès de la Société Française de Recherche Opérationnelle et Aide à la Décision - ROADEF 2008 (du 25 au 27 février 2008, Clermont-Ferrand), Livre des résumés, p. 185-186.
     
  • F. Hnaien, A. Dolgui, X. Delorme, H. Marian. Planification des réapprovisionnements d'un système d'assemblage à multi-niveau soumis aux aléas des délais d'approvisionnement par un algorithme génétique. 9ème Congrès de la Société Française de Recherche Opérationnelle et Aide à la Décision - ROADEF 2008 (du 25 au 27 février 2008, Clermont-Ferrand), Livre des résumés, p. 241-242.
     
  • A. Dolgui. Configuration des lignes d'usinage avec équipement standard. 2èmes Journées Nationales MACS, JN-MACS-2007, 9-11 juillet 2007, Reims, J. Zaytoon, P. Ladet (Eds.), p. 173
     
  • S. Belmokhtar, A. Dolgui. Modélisation de la configuration des lignes d'usinage avec équipements standard. Conférence scientifique conjointe en Recherche Opérationnelle et Aide à la Décision FRANCORO V / ROADEF 2007 (du 20 au 23 février 2007, Grenoble), Livre des résumés. ISBN 978-2-7061-1398-7, Presses Universitaires de Grenoble, p. 65-66.
     
  • A. Dolgui, N. Guschinsky, G. Levin. Optimisation des transmissions mécaniques complexes avec une structure en réseaux. Conférence scientifique conjointe en Recherche Opérationnelle et Aide à la Décision FRANCORO V / ROADEF 2007 (du 20 au 23 février 2007, Grenoble), Livre des résumés. ISBN 978-2-7061-1398-7, Presses Universitaires de Grenoble, p. 177-178.
     
  • O. Guschinskaya, A. Dolgui. Une méthode exacte pour l'équilibrage de lignes d'usinage avec machines parallèles et changements d'outils. Conférence scientifique conjointe en Recherche Opérationnelle et Aide à la Décision FRANCORO V / ROADEF 2007 (du 20 au 23 février 2007, Grenoble), Livre des résumés. ISBN 978-2-7061-1398-7, Presses Universitaires de Grenoble, p. 225-226.
     
  • F. Hnaien, A. Dolgui. Planification d'une chaîne logistique linéaire multi-niveau soumis aux aléas des délais d'approvisionnements. Conférence scientifique conjointe en Recherche Opérationnelle et Aide à la Décision FRANCORO V / ROADEF 2007 (du 20 au 23 février 2007, Grenoble), Livre des résumés. ISBN 978-2-7061-1398-7, Presses Universitaires de Grenoble, p. 243-244.
     
  • N. Guschinsky, A. Dolgui, G. Levin. Exact Methods for Design of Unit-Head Machines. Abstracts of the European Conference on Combinatorial Optimization (ECCO XIX) and the Biennial International Symposium on Combinatorial Optimization (CO2006), Porto, Portugal, May 11-13, 2006, p. 29.
     
  • G. Levin, N. Guschinsky, A. Dolgui. Some Approaches To Balancing Production Lines With Blocks Of Parallel Operations At Stations. EURO XXI in Iceland: 21st European Conference, July 2-5, 2006, p. 212.
     
  • M.-A. Louly, A. Dolgui. An inventory model to supply planning of assembly systems. Preprints of the Fourteenth International Working Seminar on Production Economics, Innsbruck, Austria, February 20-24, 2006, vol. 3, p. 207.
     
  • S. Belmokhtar, A. Dolgui et X. Delorme. Conception préliminaire de ligne de transfert avec activation mixte des têtes d'usinage aux stations. 7ème congrès de la Société Française de Recherche Opérationnelle et d'Aide à la Décision, 6, 7, 8 Février 2006, Lille, CD-ROM.
     
  • O. Guschinskaya et A. Dolgui. Une méthode hybride pour l'optimisation de lignes d'usinage. 7ème congrès de la Société Française de Recherche Opérationnelle et d'Aide à la Décision, 6, 7, 8 Février 2006, Lille, CD-ROM.
     
  • A. Dolgui, A.V. Eremeev, and V.S. Sigaev. On complexity of a buffers allocation problem. Abstracts of the 3rd All-Russia Conference “Optimization Problems and Economical Applications”, Omsk, 2006, p. 88. (in Russian).
     
  • M. Lamiri, X. Xie, A. Dolgui and F. Grimaud. A stochastic model for operating room planning with elective and emergency surgery demands, OR for Health Policy: Making better decision: 31th Meeting of the European Working Group ORAHS, Southampton, UK, 2005.
     
  • A. Dolgui, N. Guschinsky, G. Levin, X. Delorme. Exact and Heuristic Algorithms for Optimization of Transfer Lines with Multi-Spindle Stations. 17th Triennial Conference of the International Federation of Operational Research Societies (IFORS), July 11-15, 2005, Hawaii, USA, p. 26.
     
  • G. Levin, A. Dolgui, N. Guschinsky, Balancing Paced Production Lines with Block of Parallel Operations at Stations. 17th Triennial Conference of the International Federation of Operational Research Societies (IFORS), July 11-15, 2005, Hawaii, USA, p. 4.
     
  • N. Guschinsky, A. Dolgui, G. Levin, Constrained mixed graph colorings. The European Chapter on Combinatorial Optimization ECCO XVIII "Combinatorics for modern manufacturing, logistics and supply chains", 26-28 May, 2005, Minsk (Belarus).
     
  • O.Guschinskaya, A. Dolgui, N. Guschinsky, G. Levin, A combined optimization approach for machining transfer lines with blocks of operations, The European Chapter on Combinatorial Optimization ECCO XVIII "Combinatorics for modern manufacturing, logistics and supply chains", 26-28 May, 2005, Minsk (Belarus).
     
  • M. Pashkevich, A. Dolgui, Heuristic algorithm for scheduling and commercial management of TV stations, The European Chapter on Combinatorial Optimization ECCO XVIII "Combinatorics for modern manufacturing, logistics and supply chains", 26-28 May, 2005, Minsk (Belarus).
     
  • A. Dolgui, N. Guschinsky, G. Levin. Un exemple d'application des méthodes de la RO pour l'optimisation des transmissions mécaniques. 6ème Congrès de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF05) Ecole Polytechnique de l'Université de Tours, 14-15-16 février 2005, Tours, p. 161-162.
     
  • A. Dolgui, N. Guschinsky et G. Levin Optimisation des Machines d'Usinage et des Lignes de Transfert. Actes de la Conférence Internationale en Recherche Opérationnelle (FRANCORO 2004), Fribourg, Switzerland, 18­21 Aug. 2004. ­ E. Taillard, M. Widmer, P. Waelti (Eds.), Fribourg, 2004, p. 47­48.
     
  • A. Dolgui, N. Guschinsky, and G. Levin. Decomposition approach for transfer line life cycle cost optimisation. Proceedings of the 2nd International Workshop on Discrete Optimisation Methods in Production and Logistics, July 20-27 2004, 2004, p. 160.
     
  • G. Levin, A. Dolgui, N. Guschinsky. Mathematical models and methods for balancing production lines with parallel blocks of operations at workstations. The 18th International Symposium on Mathematical Programming. Kopenhagen, Dänemark, August 18-22, 2003, p. 58.
     
  • A. Dolgui, A. Ereemev, A. Kolokolov, and V. Sigaev. On some heuristic algorithms for buffers allocation problem. Optimisation problems in economics, Omsk- 2003, July 1-5 2003, ISBN 5- 8239-0135-6, p. 85. (in Russian)
     
  • A. Dolgui, N. Guschinsky et G. Levin. Utilisation d'un algorithme de plus court chemin pour l'optimisation des lignes de transfert. 5ème Congrès de la société française de Recherche Operationnelle et d'Aide à la décision (ROADEF 2003), Université d'Avignon, France, 26-28 février, 2003, p. 41-42.
     
  • A. Dolgui, N. Guschinsky et G. Levin. Decision aid for design of transmission systems. International conference "Intellectual systems for information processing" (IOI 2002), Symfiropole, Ukraine, 2002, p. 118. (in Russian)
     
  • A. Dolgui, B. Finel. Load balancing for transfer lines, Theory of conflict and its applications, Voronezh, Russia, 2002, p. 134-139.
     
  • Y. Sotskov, A. Dolgui et F. Werner. Unit-Time Job-Shop Scheduling via Mixed Graph Coloring. International Conference on Scheduling in Computer and Manufacturing Systems, June 2-7, 2002, Germany, CD-ROM (abstract).
     
  • A. Kolokolov, A. Dolgui, A. Ereemev, et V. Sigaev. On buffers allocation problem: complexity and heuristic solution. Operations research 2002, International conference on Operations research, September 2- September 5, 2002, Klagenfurt, Germany, p. 99.
     
  • A. Dolgui, N. Sotskova. Stability Analysis For Assembly Lines Sequencing With Uncertain Processing Times. Proceedings of the Fifth Workshop on Models and Algorithms for Planning and Scheduling Problems (MAPSP) Aussois, June 17-22, 2001, 2 pages.
     
  • A. Dolgui, M-A. Louly. Un modèle de gestion de stocks avec demande et délais d'approvisionnement aléatoires, 3ème Congrès ROADEF, Ecole des Mines de Nantes, 26-28 janvier 2000, Nantes, p. 10-11.
     
  • A. Dolgui. Transportation Operations Conflict in Automated Assembly Line. Proceedings of the First Russian Conference on Theory of Conflicts, 26-29 June 2000, Voronezh, p. 49-50.
     
  • A. Dolgui, N. Guschinski, G. Levin. Un problème d'optimisation en conception de lignes de production. Deuxième Congrès de la Société Française de Recherche Opérationnelle et Aide à la Décision (ROADEF'99), Autrans, Grenoble, 13-15 Janvier 1999, p. 80.
     
  • A. Dolgui, Une approche Pareto Optimale pour la conception des systèmes manufacturiers, Groupe de Travail ROADEF sur la Programmation Mathématique MultiObjectif, 1ère journée de travail à l'Université de Valenciennes et du Hainaut Cambrésis, le 9 septembre 1999.
     
  • A. Dolgui, V. Sysoev A Set of Benchmark Functions for Global Optimisation Heuristics, The 15th Triennal Conference of IFORS, Beijing, P.R. China, August 16-20, 1999.
     
  • O. Zaikin, P. Kraszewski and A. Dolgui. A problem of channel assignment in the system Inmarsat-C. The 54-th Conference of Russian A. Popov Radio Association (NTS A. Popov), Moscow, Russia, May, 1999, p. 46-47. (in Russian)
     
  • A. Dolgui, N. Guschinski, G. Levin. Decomposition approach to optimize structure and parameters of manufacturing processes of multiposition machining. Computer-Aided Design/ Computer-Aided Manufacturing (CAD/CAM'98), A.G. Rakovitch (Ed.) (ISBN 985-6453-17-8), Academy of Sciences, Minsk, 1998, p. 77-78.
     
  • A. Dolgui. An Inventory Control Model for Replaceable Units in Maintenance Planning, The International Conference on Industrial Logistics (ICIL'97), Chico, California, USA, 16-19 June 1997.
     
  • R. La, C.Chu and A. Dolgui. An Approach to Solve a Real Life Multi-criteria Guillotine Cutting Problem, 3-5 September 1997, Symposium on Operations Research 1997, Jena, Germany
     
  • A. Dolgui, D. Sysoev. Modeling of Multi-objective Systems. Proceedings of the 3rd Russian Conference "Information technologies and systems", Voronezh, 1999, p. 192-193. (in Russian)
     
  • A. Dolgui. Performance analysis of manufacturing lines. Proceedings of the Conference on New Methods in Teaching and Research, 5-6 February, 1992, Minsk, p. 72. (in Russian)
     
  • A. Dolgui, I. Svirine, V. Starych A Software Tool for Modeling and Analysis of Automated Workshop. The All-Union Conference on Simulation, organized by Soviet Committee of the IMACS, 1-3 October 1991, Voronezh, USSR, p.70. (in Russian)
     
  • A. Dolgui and I. Svirine. Modeling and analysis of asynchronous process in FMS real time planning. Seminar "Microprocessors in control systems", 23-24 September 1991, Penza, p. 46-47. (in Russian)
     
  • I. Svirine, A. Dolgui, D. Ofitserov and E. Kusnetsov. A Software Tool for Planning and Scheduling in Automated Factory. The All-Union Conference "Artificial Intelligence and Control Systems", June 18-20, 1991, USSR, Baku, p. 196. (in Russian)
     
  • I. Svirine, A. Dolgui. Integrated environment for modeling intelligent CAD/CAM systems in electronics industry. The All-Union Conference "Artificial Intelligence and Control Systems", June 18-20, 1991, USSR, Baku, p. 182. (in Russian)
     
  • A. Dolgui, V. Starych and Y. Svirine. Design of Control System for Automated Manufacturing Workshops. The Regional Conference "Design and Implantation of the Robots and the Flexible Manufacturing Systems", USSR, Iochkar-Ola, October 9-10, 1990, p. 16-18. (in Russian)
     
  • A. Dolgui, V. Starych and Y. Svirine Software tool for performance analysis of flexible manufacturing systems. The Regional Conference "Design and Implantation of the Robots and the Flexible Manufacturing Systems", USSR, Iochkar-Ola, October 9-10, 1990, p. 21. (in Russian)
     
  • A. Dolgui and M. Revotuk. Models for testing of FMS control systems. The Regional Conference "Design and Implantation of the Robots and the Flexible Manufacturing Systems", USSR, Iochkar-Ola, 9-10 December 1987, p. 60-61. (in Russian)
     
  • A. Dolgui and M. Revotuk. A Based Simulation Technology for Design of Real Time Control Systems. The All-Union Seminar "Flexible Manufacturing Systems", 27 November- 4 December 1986, USSR, Narva, p. 62-64. (in Russian)
     
  • M. Revotuk, A. Dolgui and V. Starych. Interpreted Nets for Design of Flexible Manufacturing Control Systems. The All-Union Seminar "Software Tools for Flexible Manufacturing Systems", USSR, Tver (Kalinine), 1986, p. 85-86. (in Russian)
     
  • M. Revotuk, A. Dolgui, S. Miasnikov and L. Smolnikov. Simulation Models for Test of Control Systems. The 11th All-Union Seminar, "Design and Implantation of the Real Time Control Systems", September 9-11, 1986, USSR, Novgorod, p. 142-144. (in Russian)
     
  • A. Dolgui. Stochastic Models in Computer Aided Manufacturing Systems Management. The Belarussian Conf. on CAD/CAM, 24-25 September 1986, Minsk, p. 98-99. (in Russian)
     
  • A. Dolgui. Simulation Aided Choice of a Flexible Manufacturing System. The Second All-Union Conference "Problems of Flexible Manufacturing Systems Design and CAD/CAM", USSR, Grodno, June 11-13, 1986, Radio i Sviaz (Publishing House "Radio and Telecommunications"), Moscow, 1986, p. 10-11. (in Russian)
     
  • I. Svirine, A. Dolgui, M. Revotuk and S. Miasnikov. Use of Simulation in Computer Aided Manufacturing Management Systems. The All-Union Conference "Computer Integrated Manufacturing", October 22-24, 1985, Siberian Department of the Academy of Sciences of U.S.S.R., Novossibirsk, p. 164-165. (in Russian)
     
  • A. Dolgui and I. Svirine. Production Line Analysis Based of Stochastic Models. The Belarussian Conference "Experience of Use of Computer Aided Systems in Industrial Entreprises", 20-22 November 1985, Gomel', USSR, p. 101-102. (in Russian)
     
  • A. Dolgui and I. Svirine. Stochastic Analysis of an Automated Production Line. The 27th Conference of the Universities of the Baltic States, Bielorussia and Moldavia, Riga, Latvia, April 19-21, 1983, p. 1. (in Russian)
Top

RESEARCH REPORTS

  • O. Battaïa, A. Dolgui, N. Guschinsky, and G. Levin. MIP Approach to Design of Rotary Transfer Machines with Turrets, n° RR-13-08, LIMOS, CNRS UMR 6158, April 19th, 2013, 35 pages.
     
  • Y.N. Sotskov, A. Zatsiupa, A. Dolgui. Stable optimal line balances with a fixed station set, Research Report n° RR-13-03, LIMOS, CNRS UMR 6158, April 8th, 2013, 12 pages.
     
  • E.R. Gafarov, A.A. Lazarev, A. Dolgui, F. Werner, A Graphical Approach to Solve an Investment Optimization Problem, Preprint, FMA, Otto-von-Guericke-Universität Magdeburg, Preprint 15/12, FMA, 27 pages.
     
  • E.R. Gafarov, A. Dolgui, F. Werner, Dynamic Programming Approach to Design FPTAS for Single Machine Scheduling Problems, Report n° RR-12-02, LIMOS, CNRS UMR 6158, March 3rd, 2012, 26 pages.
     
  • E.R. Gafarov, A. Dolgui, Two-Station Single Track Railway Scheduling Problem With Equal Speed of Trains, Report n° RR-12-09, LIMOS, CNRS UMR 6158, April 7th, 2012, 14 pages.
     
  • E.R. Gafarov, A. Dolgui, Two Customized Parallel Machines Scheduling Problem with Precedence Relations, Report n° RR-12-10, LIMOS, CNRS UMR 6158, April 7th, 2012, 9 pages.
     
  • E.R. Gafarov, A. Dolgui, Hard Special Case and Other Complexity Results for SALBP-1, Report n° RR-12-08, LIMOS, CNRS UMR 6158, April 7th, 2012, 13 pages.
     
  • M. Essafi, X. Delorme and A. Dolgui, GRASP with Path Relinking for a reconfigurable transfer lines balancing problem, Report LSTI-EMSE 2011-500-004, May 2011, Ecole des Mines de Saint-Etienne, 31 pages.
     
  • E. Gurevsky, O. Hazir, O. Battaïa, A. Dolgui, Flexible robust balancing of simple assembly lines, Report LSTI-EMSE 2011-500-006, May 2011, Ecole des Mines de Saint-Etienne, 11 pages.
     
  • O. Battaïa, A. Dolgui, N. Guschinsky, and G. Levin, Combinatorial optimization methods for design of machines with a mobile table, Report LSTI-EMSE 2011-500-002, April 2011, Ecole des Mines de Saint-Etienne, 17 pages.
     
  • O. Battaïa, A. Dolgui, N. Guschinsky, and G. Levin, Design of complex machining lines: a problem formulation and solution methods, Report LSTI-EMSE 2011-500-001, April 2011, Ecole des Mines de Saint-Etienne, 20 pages.
     
  • P. Borisovsky, X. Delorme, and A. Dolgui, Genetic algorithm for a balancing machining lines problem with sequence dependent setup times, Report LSTI-EMSE 2010-500-009, December 2010, Ecole des Mines de Saint-Etienne, 9 pages.
     
  • P. Borisovsky, X. Delorme, and A. Dolgui, Solving one machining lines balancing problem with sequence dependent setup times as a set partitioning problem, Report LSTI-EMSE 2010-500-008, December 2010, Ecole des Mines de Saint-Etienne, 11 pages.
     
  • E. Gurevsky, O. Guschinskaya, A. Dolgui, SALBP-E under uncertainty: variations of task processing times, Report LSTI-EMSE 2010-500-007, December 2010, Ecole des Mines de Saint-Etienne, 19 pages.
     
  • O. Hazir, A. Dolgui, Robust Optimization for Assembly Line Balancing under Uncertainty, Report LSTI-EMSE 2010-500-006, December 2010, Ecole des Mines de Saint-Etienne, 26 pages.
     
  • A. Dolgui and S. Kovalev, Scenario Based Robust Line Balancing, Research Report LSTI-EMSE 2010-500-005, November 2010, Ecole des Mines de Saint-Etienne, 18 pages.
     
  • O. Guschinskaya, A. Dolgui, Flow line balancing: mathematical modelling and solution methods, Research Report LSTI-EMSE 2010-500-004, November 2010, Ecole des Mines de Saint-Etienne, 37 pages.
     
  • P. Borisovsky, A. Dolgui and S. Kovalev, Modeling and solving the transfer line design problem with parallel operations at workstations, Research Report LSTI-EMSE 2010-500-003, November 2010, Ecole des Mines de Saint-Etienne, 19 pages.
     
  • A. Dolgui and S. Kovalev, Min-Max and Min-Max regret approaches to minimum cost tools selection, Research Report LSTI-EMSE 2010-500-002, July 2010, Ecole des Mines de Saint-Etienne, 10 pages.
     
  • A. Dolgui and J.-M. Proth, Radio Frequency Identification (RFID) in Supply Chains, Research Report LSTI-EMSE 2010-500-001, July 2010, Ecole des Mines de Saint-Etienne, 35 pages.
     
  • Y.L. Orlovich, A. Dolgui, G. Finke, V.S. Gordon, F. Werner, On the complexity and inapproximability of dissociation set problems in graphs, Preprint 05/10, FMA, OvGU Magdeburg, Germany, 2010, 15 pages.
     
  • A. García-Villoria, A. Corominas, X. Delorme, A. Dolgui, W. Kubiak, and R. Pastor, A branch and bound approach for the response time variability problem, Technical report IOC-DT-P-2009-05, Universitat Politècnica de Catalunya, Spain, 2009, 17 pages.
     
  • A. Dolgui and S. Kovalev, Transfer line design problem with parallel operations at workstations as a simple set partitioning problem, Research Report LSTI-EMSE 2009-500-007, December 2009, Ecole des Mines de Saint-Etienne, 11 pages.
     
  • J. Blazewicz, A. Dolgui, V. Gordon, Yu. Orlovich, On the complexity of the independent set problem in triangle graphs, Research Report LSTI-EMSE 2009-500-006, December 2009, Ecole des Mines de Saint-Etienne, 14 pages.
     
  • V. Gordon, V. Strusevich, A. Dolgui, On scheduling with due date assignment under special conditions on job processing, Research Report LSTI-EMSE 2009-500-005, December 2009, Ecole des Mines de Saint-Etienne, 28 pages.
     
  • A. Dolgui, F. Grimaud, K. Shchamialiova, Lot-sizing and sequencing under uncertainties: a state of the art and a case study, Research Report G2I-EMSE 2009-500-004, June 2009, Ecole des Mines de Saint Etienne, 43 pages.
     
  • F. Hnaien, M.A. Louly, A. Dolgui, H. Marian, Approvisionnement en composants pour un système d’assemblage à deux niveaux, Research Report G2I-EMSE 2009-500-003, Juin 2009, Ecole des Mines de Saint Etienne, 29 pages.
     
  • F. Hnaien, X. Delorme, A. Dolgui, Bi-objective optimization for supply planning of two-level assembly systems under uncertainty of lead times, Research Report G2I-EMSE 2009-500-007, January 2009, Ecole des Mines de Saint Etienne, 21 pages.
     
  • A. Dolgui, V. Gordon, and V. Strusevich, A Single Machine Scheduling Problem with Position-Dependent Processing Times and Precedence Constraints, Research Report G2I-EMSE 2009-500-001, January 2009, Ecole des Mines de Saint Etienne, 22 pages.
     
  • F. Hnaien, X. Delorme, A. Dolgui. Bi-objective optimization for supply planning of two-level assembly systems under uncertainty of lead times, Research Report G2I-EMSE 2008-500-007, December 2008, Ecole des Mines de Saint Etienne, 21 pages.
     
  • M. Essafi, X. Delorme, A. Dolgui, O. Guschinskaya. MIP approach for balancing flexible transfer lines with complex industrial constraints, Research Report G2I-EMSE 2008-500-004, October 2008, Ecole des Mines de Saint Etienne, 25 pages.
     
  • V. Gordon, A. Dolgui and V. Strusevich, Due Date Assignment and Scheduling with Special Conditions on Job Processing, Research Report G2I-EMSE 2008-500-003, July 2008, Ecole des Mines de Saint Etienne, 15 pages.
     
  • F. Hnaien, X. Delorme, A. Dolgui. A supply planning for two-level assembly systems with random lead times: genetic algorithm, Research Report G2I-EMSE 2008-500-002, April 2008, Ecole des Mines de Saint Etienne, 28 pages.
     
  • A. Dolgui, A. Eremeev, M.Y. Kovalyov. Multi-product lot-sizing and sequencing on unrelated parallel machines, Research Report G2I-EMSE 2007-500-011, December 2007, Ecole des Mines de Saint Etienne, 15 pages.
     
  • A. Dolgui, M.Y. Kovalyov. Combinatorial design of a minimum cost transfer line with parallel operations at workstations, Research Report G2I-EMSE 2007-500-010, December 2007, Ecole des Mines de Saint Etienne, 15 pages.
     
  • A. Dolgui, M.Y. Kovalyov. Multi-product lot-sizing and sequencing on an imperfect single machine, Research Report G2I-EMSE 2007-500-009, December 2007, Ecole des Mines de Saint Etienne, 16 pages.
     
  • O. Guschinskaya, A. Dolgui. Improvement in solving balancing problems for machining transfer lines with blocks of parallel operations. Research Report G2I-EMSE 2007-500-008, July 2007, Ecole des Mines de Saint Etienne, 34 pages
     
  • O. Guschinskaya, A. Dolgui. Comparative Analysis of Exact and Heuristic Methods for a Transfer Line Balancing Problem, Research Report G2I-EMSE 2007-500-007, April 2007, Ecole des Mines de Saint Etienne, 33 pages.
     
  • F. Hnaien, A. Dolgui, M.A. Ould Louly. Optimization of supply planning for multilevel production systems under lead time uncertainties. Research Report G2I-EMSE 2007-500-003, March 2007, Ecole des Mines de Saint Etienne, 23 pages.
     
  • O. Guschinskaya, A. Dolgui, N. Guschinsky, and G. Levin. Scheduling for multi-spindle head machines with a mobile table. Research Report G2I-EMSE 2007-500-002, January 2007, Ecole des Mines de Saint Etienne, 26 pages.
     
  • A. Dolgui, M. Pashkevich. Enhanced Optimisation Techniques for Off-line Programming of Laser Cutting Robots. Research Report G2I-EMSE 2007-500-015, November 2006, Ecole des Mines de Saint Etienne, 32 pages.
     
  • A. Dolgui and I. Ihnatsenka. Transfer line balancing via a special set partitioning branch and bound algorithm. Research Report G2I-EMSE 2006-500-018, December 2006, Ecole des Mines de Saint Etienne, 28 pages.
     
  • A. Dolgui, N. Guschinsky, G. Levin. An improved MIP approach for balancing transfer lines with simoultaneously activated spindle heads, Research Report G2I-EMSE 2006-500-014, October 2006, Ecole des Mines de Saint Etienne, 21 pages.
     
  • A. Dolgui, O. Guschinskaya, N. Guschinsky, G. Levin. Decision making and support tools for design of machining systems, Research Report G2I-EMSE 2006-500-012, October 2006, Ecole des Mines de Saint Etienne, 12 pages.
     
  • O. Guschinskaya, A. Dolgui, Equilibrage des lignes d'usinage : la résolution des problèmes de grande taille, Research Report G2I-EMSE 2006-500-011, Octobre 2006, Ecole des Mines de Saint Etienne, 30 pages.
     
  • F. Hnaien, A. Dolgui, M.A. Ould Louly. The optimal release dates in multi-level assembly systems with random lead times. Research Report G2I-EMSE 2006-500-010, September 2006, Ecole des Mines de Saint Etienne, 11 pages.
     
  • L. Capacho, O. Guschinskaya, A. Dolgui, R. Pastor. A Comprehensive Comparative Analysis of Heuristic Methods for the Alternative Subgraphs Assembly Line Balancing Problem. Research Report G2I-EMSE 2006-500-005, May 2006, Ecole des Mines de Saint Etienne, 21 pages.
     
  • L. Capacho, O. Guschinskaya, A. Dolgui, R. Pastor. Approximation Methods to Solve the Alternative Subgraphs Assembly Line Balancing Problem. Research Report G2I-EMSE 2006-500-003, May 2006, Ecole des Mines de Saint Etienne, 25 pages.
     
  • A. Dolgui, M. Pashkevich. On Performance of Binomial and Beta-Binomial Models of Lead-time Demand Forecasting for Multiple Slow-Moving Items with Short Requests History, Research Report G2I-EMSE 2005-500-019, December 2005, Ecole des Mines de Saint Etienne, 14 pages.
     
  • A. Dolgui, M. Pashkevich. Extended Beta-binomial Model for Demand Forecasting of Multiple Slow-Moving Items with Low Consumption and Short Requests History, Research Report G2I-EMSE 2005-500-012, September 2005, Ecole des Mines de Saint Etienne, 26 pages.
     
  • S. Belmokhtar, A. Dolgui, N. Guschinsky, G. Levin. An integer Programming Model for Logical Layout Design of Modular Machining Lines, Research Report G2I-EMSE 2005-500-018, September 2005, Ecole des Mines de Saint Etienne, 34 pages.
     
  • O. Guschinskaya, A. Dolgui, N. Guschinsky, G. Levin. Hybrid Approach for Optimization of a Class of Machining Lines, Research Report G2I-EMSE 2005-500-017, November 2005, Ecole des Mines de Saint Etienne, 32 pages.
     
  • A. Dolgui, O. Guschinskaya, N. Guschinsky, G. Levin. Conception de Machines-Outils : prototype d'un système d'aide à la décision, Research Report G2I-EMSE 2005-500-016, November 2005, Ecole des Mines de Saint Etienne, 32 pages.
     
  • A. Dolgui, M. Pashkevich. On performance of Binomial and Beta-Binomial Models for Lead Time Demand Forecasting for Multiple Slow-Moving Items with Short Requests History, Research Report G2I-EMSE 2005-500-019, September 2005, Ecole des Mines de Saint Etienne, 14 pages.
     
  • M. Lamiri, X. Xie, A. Dolgui and F. Grimaud. A stochastic model for operating room planning with elective and emergency surgery demands, Research Report G2I-EMSE 2005-500-014, Novembre 2005, Ecole des Mines de Saint Etienne, 24 pages.
     
  • A. Bratcu, A. Dolgui, V. Minzu. Optimisation du coût de l'équipement des lignes de transfert reconfigurables avec opérations en parallèle. Rapport de recherche de l'Université « Duènarea de Jos » de Galati, Romania, 2005, 20 pages.
     
  • A. Dolgui, N. Guschinsky, G. Levin. Graph Approach for Optimal Design of Unit-Head Machines with a Rotary Table, Research Report G2I-EMSE 2005-500-004, March 2005, Ecole des Mines de Saint Etienne, 30 pages.
     
  • A. Dolgui, A. Pashkevich, M. Pashkevich, and F. Grimaud. Forecasting Risk Analysis for Supply Chains with Intermittent Demand, Research Report G2I-EMSE 2005-500-003, March 2005, Ecole des Mines de Saint Etienne, 19 pages.
     
  • A. Dolgui, N. Guschinsky, G. Levin. Exact and Heuristic Algorithms for Balancing Transfer Lines with Simultaneously Activated Spindle Heads: A Computational Evaluation, Research Report G2I-EMSE 2005-500-002, January 2004, Ecole des Mines de Saint Etienne, 36 pages.
     
  • A. Dolgui, I. Ihnatsenka. Balancing Transfer Lines with Mixed Activation of Spindle Heads. Research Report G2I-EMSE 2005-500-001, January 2004, Ecole des Mines de Saint Etienne, 33 pages.
     
  • A. Dolgui, I. Ihnatsenka. Branch and Bound algorithm for optimal design of transfer lines with multi-spindle stations. Research Report G2I-EMSE 2004-500-001, November 2004, Ecole des Mines de Saint Etienne, 20 pages.
     
  • A. Dolgui, A. Pashkevich. Cluster-level operations planning in arc-welding robot cell with positioning table, Research Report G2I-EMSE 2004-500-002, November 2004, Ecole des Mines de Saint Etienne, 32 pages.
     
  • A. Dolgui, N. Guschinsky, G. Levin, and J.-M. Proth. Graph approach for balancing a class of transfer lines, Research Report INRIA N°4996, November 2003, 33 pages.
     
  • S.S. Chauhan, A. Dolgui, J.-M. Proth. A model for ordering policy in an assembly system under lead time uncertainty, Research Report INRIA N°4802, April 2003, 20 pages.
     
  • A. Bratcu, A. Dolgui. Etat de l'art de la problématique Bucket brigades (lignes auto-équilibrées). Research Report LOSI-2003- 04, 46 pages.
     
  • A. Dolgui et V. Sysoev. Une heuristique d'optimisation globale basée sur la psi- transformation. Research Report LOSI-2002-02, 36 pages.
     
  • Y. Sotskov, A. Dolgui, et M-C. Portmann. Stability of Balance Optimality and Feasibility for Assembly Line with Fixed Cycle Time. Research Report LOSI-2002-03, 33 pages.
     
  • A. Dolgui, N. Guschinsky et G. Levin. A Special Case of Transfer Lines Balancing by Graph Approach. Research Report LOSI-2002-04, 33 pages.
     
  • Y. Sotskov, A. Dolgui, N. Sotskova, F. Werner. Stability of the Optimal Line Balance: Case of Fixed Number of Stations. Preprint N°20, 2002, Otto-Von-Guericke-Universität, Magdeburg, Germany, 12 pages.
     
  • A. Dolgui, N. Guschinsky and G. Levin. Approaches to balancing of transfer lines with blocks of parallel operations, Institute of Engineering Cybernetics of Academy of Sciences, Minsk, Belarus, Preprint N°8, November 2000, 41 pages.
     
  • Y. Sotskov, A. Dolgui and F. Werner. Unit-time Job-shop Scheduling via Mixed Graph Coloring. Otto-von-Guericke-University, Magdeburg, Allemagne, Preprints N°27, October 2000, 38 pages.
     
  • A. Dolgui. Une approche Pareto Optimale pour la conception des systèmes manufacturiers. Journée de travail PM20 Programmation mathématique multiobjectif, 9 septembre 1999, LAMIH-ROAD, Université de Valenciennes, 20 pages.
     
  • V. Sysoev, A. Dolgui. Une méthode d'optimisation multicritère et son utilisation pour la conception des systèmes de production. Abstacts/Papers of the 48th Meeting of the European Working Group : "Multicriterion Decision Aid", Quebec, Septembre 24-26, 1998, 13 pages.
     
  • A. Dolgui, M. C. Portmann, J. M. Proth. Gestion des systèmes d'assemblage multi-produits avec approvisionnement aléatoire, Rapport de Recherche INRIA N°2755, décembre 1995, 34 pages.
     
  • A. Dolgui. Analyse de performances d'un atelier de production discontinue : méthode et logiciel, Rapport de Recherche INRIA N°1949, juin 1993, 44 pages.
     
  • A. Dolgui. A Markov Model for Performances Analysis of Automated Production Lines. Research Institute of Scientific Information of the State Committee of Plan (BELNIINTI), Minsk, 1991, N°1007-91, 28 pages. (in Russian)
     
  • A. Dolgui and Y. Svirine. Petri Net Based Modelling of the Flexible Manufacturing Systems. Research Institute of Scientific Information of the State Committee of Plan (BELNIINTI), Minsk, 1991, N°1008-91, 32 pages. (in Russian)
     
  • A. Dolgui and Y. Svirine. GPSS-Model of an Automated Manufacturing Workshop (in Russian). Central Research Institute of Scientific Information and Economics (CNIITEI), Moscow, 1985, N°2811pr-85dep, 17 pages. (in Russian)
     
  • Y. Svirine and A. Dolgui. Performances Analysis of Automated Production Lines (in Russian). Central Research Institute of Scientific Information and Economics (CNIITEI), Moscow, 1985, N°2812pr-85dep, 16 pages. (in Russian)
Top

THESIS

  • A. Dolgui. Conception et gestion des systèmes de production: nouvelles méthodes et applications, Habilitation à diriger des recherches (Dr. Habil.), Université de technologie de Compiègne, 22 décembre 2000, 92 pages.
     
  • A. Dolgui. Set of Models for Study and Design of Automated Production Systems in Electronic Industry, Ph.D. Dissertation, December 28, 1990, Institute of Engineering Cybernetics of the Academy of Sciences of Byelorussia, Minsk, 234 pages (in Russian)
     
  • A. Dolgui. Set of Models for Study and Design of Automated Production Systems in Electronic Industry. Overview of the Ph.D. Dissertation, Institute of Engineering Cybernetics of the Academy of Sciences of Byelorussia, Minsk, October 1990, 17 pages (in Russian)
     
  • A. Dolgui. Models for Study and Design of Automated Production Systems in Electronic Industry, Dissertation, December, 1986, Minsk Radio-engineering Institute, Manuscript, 180 pages (in Russian)
     
  • A. Dolgui. Stochastic Model of a Production Line. Master thesis, 1983 (in Russian)
Top

REPORTS OF INDUSTRIAL CONTRACTS

  • A. Dolgui, P. Lacomme. Analyse de performance et optimisation d'une chaîne d'assemblage automatisée. Rapport de contrat industriel avec MERITOR, décembre 2000, 68 pages.
     
  • A. Dolgui, P. Lacomme. Sur opportunité de modélisation et de simulation au sein de CEA. Rapport de contrat de conseil, décembre 2000, 20 pages.
     
  • V. Balaguin, A. Dolgui and M. Revotuk. Methods of Modelling of an Automated Factory: Models of Production Lines and Automated Workshop (in Russian), Final Report of the Contract N° 01840003856, Minsk Radio-Engineering Institute, 1986, 194 pages.
     
  • V. Balaguin, A. Dolgui and M. Revotuk. Methods of Modelling of an Automated Factory: Models of Production Lines and Automated Workshop (in Russian), Report of the Contract N° 01840003856, Minsk Radio-Engineering Institute, 1985, 69 pages.
     
  • A. Smirnov, I. Svirine, A. Dolgui, D. Ofitserov, M. Revotuk, V. Starych and E. Kovaltchuk. Principles of Computer Aided Management in an Automated Factory (in Russian), Final Report of the Contract N° 81064107, Minsk Radio-Engineering Institute, 1983, 142 pages.
     
  • A. Smirnov, I. Svirine, A. Dolgui, D. Ofitserov, M. Revotuk, V. Starych and E. Kovaltchuk. Principles of Computer Aided Management in an Automated Factory (in Russian), Report of the Contract N° 81064107, Minsk Radio-Engineering Institute, 1982, 350 pages.
Top

PUBLISHED COURSES

  • A. Dolgui, Cours conception des systèmes de production, mise à jour, 2014, 300 pages.
     
  • A. Dolgui, Optimisation préliminaire : conception de lignes de production, Dans : Module - Optimisation des systèmes logistiques et de production (Coordonnateurs : F. Yalaoui, L. Amodeo), Ecole des JDMACS, 11-12 juillet 2007, Reims - Troyes, 66 pages. (in French)
     
  • A. Dolgui, A. Pashkevich. Manufacturing Systems Design, Université de Technologie de Troyes, 2000, 304 pages.
     
  • A. Dolgui, A. Pashkevich. Simulation of Industrial Systems, Université de Technologie de Troyes, 2000, 320 pages.
     
  • A. Dolgui. Simulation des systèmes industriels, Université de Technologie de Troyes, 1999, 160 pages. (in French)
     
  • A. Dolgui. C++. Exercices et corrigés. Ecole des Mines de Nancy, 1995, 78 pages. (in French)
     
  • A. Sinitsine, A. Dolgui, D. Ofitserov and V. Starych. Computational Methods and Programming Language PASCAL and Programming Methods, Minsk Radio-Engineering Institute Publishing House, 1989, 35 pages. (in Russian)
     
  • D. Ofitserov V. Starych, and A. Dolgui. Programming on Personal Computer. Part 1: Operational Systems, Minsk Radio-Engineering Institute Publishing House, 1991, 61 pages. (in Russian)
     
  • A. Dolgui, D. Ofitserov and V. Starych. Programming on Personal Computer. Part 2: Programming in Turbo-Pascal. Minsk Radio-Engineering Institute Publishing House, 1991, 79 pages. (in Russian)
     
  • A. Dolgui, A. Givitski, D. Ofitserov and V. Starich. Programming on Personal Computer. Part 3 : Programming in Turbo-Basic. 1992, 66 pages. (in Russian)
     
  • A. Dolgui, D. Ofitserov and V. Starych. Programming on Personal Computer Part 4 : Pratical Works. Minsk Radio-Engineering Institute Publishing House 1993, 60 pages. (in Russian)
     
  • A. Dolgui, D. Ofitserov and V. Starych. Reference Guide on Operational System MS-DOS, Minsk, Publishing House "Nasoustratch", 1992, 46 pages. (in Russian)
     
  • A. Dolgui, D. Kuzmitski, and S. Pottosina. Petri nets and modeling of discrete systems and process. Minsk Radio-Engineering Institute Publishing House, 1991, 48 pages (in Russian) an abstract in English is appeared in Mathematics Abstracts.
Top

INVITED SEMINARS AND COMMUNICATIONS

  • A. Dolgui. Optimization techniques for MRP parametrization under lead time uncertainties, School of Management and Economics, Beijing Institute of Technology, September 9, 2015 (Invited talk).
     
  • A. Dolgui. Optimisation en conception des lignes d'usinage, Lab. CIRRELT, Québec, Université Laval, ville de Québec, Canada, 18 juin 2014. (Séminaire invité).
     
  • A. Dolgui. The International Journal of Production Research: current policy and perspectives, China, Hefei University of Technology, July 3, 2014. (Conférence invitée).
     
  • A. Dolgui. Modélisation et optimisation des systèmes industriels, Colloque IMT « Grande échelle et complexité », 26 et 27 mars 2014, Paris, Institut Mines-Télécom. (Conférence invitée).
     
  • A. Dolgui. Assembly Line Balancing: Applications in Machining Environments, University of Sciences and Technologies of Chine, Hefei, China, 21 November 2013. (Invited talk).
     
  • A. Dolgui. The International Journal of Production Research, 22nd International Conference on Production Research (ICPR-22), July 28 - August 3, Brazil, 2013. (Invited talk).
     
  • A. Dolgui. Speech when Appointed as a Fellow of the European Academy for Industrial Management, Advances in Sustainable Production Conference (AIM 2013), 19-22 September 2013, Split, Croatia.
     
  • A. Dolgui, M. Barth. Présentation du groupe de travail « Conception des systèmes de production ». 3èmes Journées Nationales MACS, JN-MACS-2009 du CNRS, 16-18 mars 2009, Angers, J. Zaytoon, P. Ladet (Eds.), p. 45-48. (in French)
     
  • A. Dolgui, M. Barth. Présentation du groupe de travail « Conception des systèmes de production ». 2èmes Journées Nationales MACS, JN-MACS-2007 du CNRS, 9-11 juillet 2007, Reims, J. Zaytoon, P. Ladet (Eds.), p. 41-44. (in French)
     
  • A. Dolgui. Conception et planification des lignes d’assemblage, EPFL, Lausanne, Suisse, 2003. (Séminaire invité).
     
Top

TALKS IN WORKING GROUPS

  • M.K.K. Habibi, O. Battaïa, V.-D. Cung, A. Dolgui. Dealing with the Collection and the Disassembly Planning for Simple End-of-Life Product. La 6é journée doctorales / journée nationales MACS, 16 - 17 Juin 2015, Bourges, France.
     
  • M.K.K. Habibi, O. Battaïa, V.-D. Cung, A. Dolgui, La coordination de la collecte des produits en fin de vie et de leurs désassemblages dans les chaînes logistiques inversées. La 20ème journée du pôle STP (Sciences et Techniques de la Production) du GdR MaCS (Groupe de Recherche du CNRS en Modélisation, Analyse et Conduite des Systèmes dynamiques), 5 février 2015, Troyes, France.
     
  • A. Dolgui. Affectation optimale des opérateurs aux postes de travail dans une ligne de montage dans l'industrie automobile, 19èmes journées STP du GdR MACS, Arts et Métiers ParisTech, 3 et 4 avril 2014.
     
  • A. Dolgui, M. C. Portmann, J. M. Proth. Plannification des systèmes d'assemblage multi-produits avec approvisionnement aléatoire, groupe GOThA (ordonancement théorique et appliqué), Univ. Paris 6, 1995.
     
  • GDR MACS (2003-2013), one or two presentations an year.
     
  • Bermudes (1994-2003), one presentation per year.
     
  • ...
Top

Valid XHTML 1.0 Transitional   Valid CSS!

   Last Update: 15/10/06